Description
Human Transforming growth factor beta-3 (TGFB3) ELISA Kit
The Human Transforming Growth Factor Beta 3 (TGFB3) ELISA Kit is a cutting-edge tool designed for the precise measurement of TGFB3 levels in human samples including serum, plasma, and cell culture supernatants. With exceptional sensitivity and specificity, this kit delivers accurate and reproducible results, making it an invaluable asset for a variety of research purposes.TGFB3 is a vital growth factor that plays a pivotal role in cell growth, differentiation, and tissue repair. Its dysregulation has been linked to a range of diseases including cancer, fibrosis, and autoimmune disorders, highlighting its significance as a biomarker for disease progression and treatment monitoring.
Researchers and healthcare professionals can trust the Human TGFB3 ELISA Kit for its reliability and performance, enabling them to gain valuable insights into disease mechanisms and therapeutic interventions. Elevate your research with this state-of-the-art kit from AssayGenie.
| Product Name: | Human Transforming growth factor beta-3 (TGFB3) ELISA Kit |
| SKU: | HUEB1263 |
| Size: | 96T |
| Target: | Human Transforming growth factor beta-3 (TGFB3) |
| Synonyms: | Transforming growth factor beta-3, TGF-beta-3, TGFB3 |
| Assay Type: | Sandwich |
| Detection Method: | ELISA |
| Reactivity: | Human |
| Detection Range: | 31.2-2000pg/mL |
| Sensitivity: | 10pg/mL |
| Intra CV: | 5.3% | ||||||||||||||||||||
| Inter CV: | 9.8% | ||||||||||||||||||||
| Linearity: |
| ||||||||||||||||||||
| Recovery: |
| ||||||||||||||||||||
| Function: | Transforming growth factor beta-3: Multifunctional protein that regulates embryogenesis and cell differentiation and is required in various processes such as secondary palate development (By similarity). Activation into mature form follows different steps: following cleavage of the proprotein in the Golgi apparatus, Latency-associated peptide (LAP) and Transforming growth factor beta-3 (TGF-beta-3) chains remain non-covalently linked rendering TGF-beta-3 inactive during storage in extracellular matrix (By similarity). At the same time, LAP chain interacts with 'milieu molecules', such as LTBP1 and LRRC32/GARP that control activation of TGF-beta-3 and maintain it in a latent state during storage in extracellular milieus (By similarity). TGF-beta-3 is released from LAP by integrins: integrin-binding results in distortion of the LAP chain and subsequent release of the active TGF-beta-3 (By similarity). Once activated following release of LAP, TGF-beta-3 acts by binding to TGF-beta receptors (TGFBR1 and TGFBR2), which transduce signal (By similarity). |
| Uniprot: | P10600 |
| Sample Type: | Serum, plasma, tissue homogenates, cell culture supernates and other biological fluids |
| Specificity: | Natural and recombinant human Transforming growth factor beta-3 proprotein |
| Sub Unit: | Interacts with ASPN (PubMed:8819159). Latency-associated peptide: Homodimer; disulfide-linked. Latency-associated peptide: Interacts with Transforming growth factor beta-3 (TGF-beta-3) chain; interaction is non-covalent and maintains (TGF-beta-3) in a latent state (By similarity). Latency-associated peptide: Interacts with LRRC32/GARP; leading to regulate activation of TGF-beta-3 and promote epithelial fusion during palate development (By similarity). Latency-associated peptide: Interacts (via cell attachment site) with integrins, leading to release of the active TGF-beta-3 (By similarity). Transforming growth factor beta-3: Homodimer; disulfide-linked (PubMed:8819159). Transforming growth factor beta-3: Interacts with TGF-beta receptors (TGFBR1 and TGFBR2), leading to signal transduction (By similarity). |
| Research Area: | Cancer |
| Subcellular Location: | Transforming growth factor beta-3 Secreted |
| Storage: | Please see kit components below for exact storage details |
| Note: | For research use only |
| UniProt Protein Function: | TGFB3: Involved in embryogenesis and cell differentiation. Homodimer; disulfide-linked. Interacts with ASPN. Belongs to the TGF-beta family. |
| UniProt Protein Details: | Protein type:Ligand, receptor tyrosine kinase; Motility/polarity/chemotaxis; Secreted; Cell development/differentiation; Secreted, signal peptide Chromosomal Location of Human Ortholog: 14q24 Cellular Component: extracellular matrix; extracellular region; extracellular space; plasma membrane Molecular Function:cytokine activity; identical protein binding; protein binding; punt binding; transforming growth factor beta binding Biological Process: alveolus development; in utero embryonic development; intercellular junction assembly and maintenance; mammary gland development; negative regulation of cell proliferation; negative regulation of DNA replication; negative regulation of neuron apoptosis; palate development; platelet degranulation; positive regulation of apoptosis; positive regulation of bone mineralization; positive regulation of collagen biosynthetic process; positive regulation of DNA replication; positive regulation of filopodium formation; positive regulation of protein secretion; positive regulation of transcription from RNA polymerase II promoter; positive regulation of transcription, DNA-dependent; regulation of apoptosis; regulation of cell proliferation; regulation of MAPKKK cascade; response to hypoxia; response to progesterone stimulus; salivary gland morphogenesis; transforming growth factor beta receptor signaling pathway; uterine wall breakdown Disease: Arrhythmogenic Right Ventricular Dysplasia, Familial, 1; Rienhoff Syndrome |
| NCBI Summary: | This gene encodes a member of the TGF-beta family of proteins. The encoded protein is secreted and is involved in embryogenesis and cell differentiation. Defects in this gene are a cause of familial arrhythmogenic right ventricular dysplasia 1. [provided by RefSeq, Mar 2009] |
| UniProt Code: | P10600 |
| NCBI GenInfo Identifier: | 135684 |
| NCBI Gene ID: | 7043 |
| NCBI Accession: | P10600.1 |
| UniProt Secondary Accession: | P10600,Q8WV88, |
| UniProt Related Accession: | P10600 |
| Molecular Weight: | 35,708 Da |
| NCBI Full Name: | Transforming growth factor beta-3 |
| NCBI Synonym Full Names: | transforming growth factor beta 3 |
| NCBI Official Symbol: | TGFB3 |
| NCBI Official Synonym Symbols: | ARVD; LDS5; RNHF; ARVD1; TGF-beta3 |
| NCBI Protein Information: | transforming growth factor beta-3 |
| UniProt Protein Name: | Transforming growth factor beta-3 |
| Protein Family: | Transforming growth factor |
| UniProt Gene Name: | TGFB3 |
| UniProt Entry Name: | TGFB3_HUMAN |
| Component | Quantity (96 Assays) | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | -20°C |
| Lyophilized Standard | 2 | -20°C |
| Sample Diluent | 20ml | -20°C |
| Assay Diluent A | 10mL | -20°C |
| Assay Diluent B | 10mL | -20°C |
| Detection Reagent A | 120µL | -20°C |
| Detection Reagent B | 120µL | -20°C |
| Wash Buffer | 30mL | 4°C |
| Substrate | 10mL | 4°C |
| Stop Solution | 10mL | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
*Note: The below protocol is a sample protocol. Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Allow all reagents to reach room temperature (Please do not dissolve the reagents at 37°C directly). All the reagents should be mixed thoroughly by gently swirling before pipetting. Avoid foaming. Keep appropriate numbers of strips for 1 experiment and remove extra strips from microtiter plate. Removed strips should be resealed and stored at -20°C until the kits expiry date. Prepare all reagents, working standards and samples as directed in the previous sections. Please predict the concentration before assaying. If values for these are not within the range of the standard curve, users must determine the optimal sample dilutions for their experiments. We recommend running all samples in duplicate.
| Step | |
| 1. | Add Sample: Add 100µL of Standard, Blank, or Sample per well. The blank well is added with Sample diluent. Solutions are added to the bottom of micro ELISA plate well, avoid inside wall touching and foaming as possible. Mix it gently. Cover the plate with sealer we provided. Incubate for 120 minutes at 37°C. |
| 2. | Remove the liquid from each well, don't wash. Add 100µL of Detection Reagent A working solution to each well. Cover with the Plate sealer. Gently tap the plate to ensure thorough mixing. Incubate for 1 hour at 37°C. Note: if Detection Reagent A appears cloudy warm to room temperature until solution is uniform. |
| 3. | Aspirate each well and wash, repeating the process three times. Wash by filling each well with Wash Buffer (approximately 400µL) (a squirt bottle, multi-channel pipette,manifold dispenser or automated washer are needed). Complete removal of liquid at each step is essential. After the last wash, completely remove remaining Wash Buffer by aspirating or decanting. Invert the plate and pat it against thick clean absorbent paper. |
| 4. | Add 100µL of Detection Reagent B working solution to each well. Cover with the Plate sealer. Incubate for 60 minutes at 37°C. |
| 5. | Repeat the wash process for five times as conducted in step 3. |
| 6. | Add 90µL of Substrate Solution to each well. Cover with a new Plate sealer and incubate for 10-20 minutes at 37°C. Protect the plate from light. The reaction time can be shortened or extended according to the actual color change, but this should not exceed more than 30 minutes. When apparent gradient appears in standard wells, user should terminatethe reaction. |
| 7. | Add 50µL of Stop Solution to each well. If color change does not appear uniform, gently tap the plate to ensure thorough mixing. |
| 8. | Determine the optical density (OD value) of each well at once, using a micro-plate reader set to 450 nm. User should open the micro-plate reader in advance, preheat the instrument, and set the testing parameters. |
| 9. | After experiment, store all reagents according to the specified storage temperature respectively until their expiry. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
