Description
Annexin V-AF647/7-AAD Apoptosis Kit
The Annexin V-AF647/7-AAD Apoptosis Kit (AKES035) is a fluorescent staining kit for detecting apoptosis in suspension and adherent cells. Annexin V-AF647 binds phosphatidylserine exposed on the outer leaflet of the apoptotic cell membrane, and 7-AAD marks cells that have lost membrane integrity. Researchers use the combination to distinguish early apoptotic, late apoptotic/necrotic, and naked-nuclei populations by flow cytometry or fluorescence microscopy.
Annexin V is a member of the annexin family that binds phosphatidylserine (PS) in a calcium-dependent manner. In apoptotic cells, PS is exposed on the outer leaflet of the plasma membrane, where Annexin V-AF647 binds it specifically.
Nuclear dyes such as 7-AAD have a high DNA-binding affinity and are efficiently excluded by intact cells. Loss of membrane integrity in late apoptotic or necrotic cells allows 7-AAD to enter and stain DNA. Combining Annexin V with 7-AAD allows cells at different apoptotic stages to be distinguished.
| Product name: | Annexin V-AF647/7-AAD Apoptosis Kit |
| SKU: | AKES035 |
| Application: | Annexin V detection |
| Detection method: | Fluorometric |
| Sample type: | Suspension and adherent cells |
| Assay time: | 40 min |
| Detection instrument: | Flow cytometer; fluorescence microscope |
| Dye type: | AF647 |
| Channel set: | APC |
- Annexin V conjugated to AF647 for phosphatidylserine detection in a calcium-dependent manner
- 7-AAD nuclear dye excluded from intact cells for dead cell discrimination
- Compatible with suspension and adherent cells
- Detection by flow cytometer (APC channel for Annexin V-AF647; PerCP/Cy5.5 channel for 7-AAD)
- One-step and two-step staining protocols, approximately 40 min total assay time
- Assay time: 40 min
Annexin V-AF647 binds to phosphatidylserine on the outer leaflet of apoptotic cell membranes in a calcium-dependent manner and can be detected by flow cytometry or fluorescence microscopy. 7-AAD is excluded by intact cells and enters late apoptotic or necrotic cells to stain DNA. Annexin V-AF647 single-positive cells are early apoptotic; cells positive for both Annexin V-AF647 and 7-AAD are necrotic or late apoptotic; and 7-AAD single-positive cells are naked nuclei.
- Quantifying early and late apoptosis in cell populations by flow cytometry
- Discriminating dead cells during flow cytometric analysis
- Detecting apoptosis by fluorescence microscopy
- Characterizing apoptosis induced by chemical treatments, for example camptothecin-treated Jurkat cells (5 µmol/L for 4 h in the validation example)
| Component | Storage |
| Annexin V-AF647 Reagent | 2-8°C, protect from light |
| Annexin V Binding Buffer (10×) | 2-8°C |
| 7-AAD Reagent (100 µg/mL) | 2-8°C, protect from light |
- Phosphate-buffered saline (PBS)
- Deionized water (for diluting the 10× Annexin V Binding Buffer)
- Flow cytometer with APC and PerCP/Cy5.5 channels (or fluorescence microscope)
- Centrifuge capable of 300 ×g
- Vortex mixer
- Microcentrifuge tubes or flow cytometry tubes
- Pipettes and tips
- Ice and a dark incubation setup
- Trypsin without EDTA, or EDTA-free wash steps, for adherent cells
Reagent preparation
- Dilute the Annexin V Binding Buffer (10×) with deionized water to 1× before use (1:10 dilution).
One-step process
- Induce apoptosis in cells with the reagent of interest. Collect cells, centrifuge at 300 ×g for 5 min, and discard the supernatant.
- Wash cells with PBS, resuspend gently, and count cells.
- Split the cell suspension into tubes at 1 to 5 × 10^5 cells per tube. Centrifuge at 300 ×g for 5 min, discard the supernatant, wash with PBS, and discard the supernatant.
- Resuspend cells in 500 µL of 1× Annexin V Binding Buffer.
- Add 5 µL of Annexin V-AF647 and 5 µL of 7-AAD to each tube.
- Vortex gently and incubate at room temperature for 15 to 20 min in the dark.
- Analyze cells immediately. Otherwise, place cells on ice in the dark and analyze within 1 h.
Two-step process
- Induce apoptosis in cells with the reagent of interest. Collect cells, centrifuge at 300 ×g for 5 min, and discard the supernatant.
- Wash cells with PBS, resuspend gently, and count cells.
- Split the cell suspension into tubes at 1 to 5 × 10^5 cells per tube. Centrifuge at 300 ×g for 5 min, discard the supernatant, wash with PBS, and discard the supernatant.
- Resuspend cells in 100 µL of 1× Annexin V Binding Buffer.
- Add 2.5 µL of Annexin V-AF647 and 2.5 µL of 7-AAD to each tube.
- Vortex gently and incubate at room temperature for 15 to 20 min in the dark.
- Add 400 µL of 1× Annexin V Binding Buffer to each tube and mix gently.
- Analyze cells immediately. Otherwise, place cells on ice in the dark and analyze within 1 h.
| Storage: | 2-8°C, protect from light |
| Freeze/thaw: | Avoid freeze/thaw cycles |
| Expiration: | 12 months |
| Shipping: | Ice bag |
Cautions
- For Research Use Only. Not for use in diagnostic or therapeutic procedures.
- When detecting adherent cells, collect the suspension cells generated after apoptosis induction and analyze them together with the subsequently collected adherent cells.
- Minimize mechanical damage during digestion of adherent cells.
- Avoid EDTA-containing trypsin where possible, as EDTA interferes with Annexin V binding to phosphatidylserine. If EDTA-containing trypsin is used, wash cells thoroughly after harvesting.
- Analyze samples as soon as possible after staining to avoid increases in apoptosis or necrosis.
- Avoid extended exposure of samples to direct light to protect fluorophores from quenching.
- Wear a lab coat and disposable gloves during the procedure.