Description
GenieSort Mouse NK Cell Isolation Kit
The GenieSort Mouse NK Cell Isolation Kit (AKES219) isolates high-purity mouse NK cells from mouse spleen single-cell suspensions by negative selection. Biotinylated antibodies label non-NK cells, and streptavidin magnetic beads deplete them, leaving unlabeled NK cells that are free of antibodies and bead labels. The isolated cells remain unstimulated and can be used directly in downstream applications.
NK cells are a lymphocyte population that lacks CD3 and is identified in mouse by surface NK1.1 (CD161) expression. In this kit, CD3-negative, NK1.1-positive cells are the target population, and the sources describe them as mouse NK cells isolated from spleen. Their biological role in the sources is limited to their identity as the isolated population, so the kit is positioned as a tool for obtaining them in pure form rather than for studying a specific function.
The sources state that the isolated NK cells can be used directly in downstream applications, and that the kit is intended for rapid, simple isolation of high-purity mouse NK cells. Purity is the central concern: the manual notes that sample type, sample preparation, and experimental operation all affect final isolated cell purity. The sources do not name specific disease models or physiological contexts, so this kit should be described in terms of the isolation workflow and downstream analysis it supports.
The kit uses negative selection. Biotinylated monoclonal antibodies label non-target cells, which are not mouse NK cells. Streptavidin-conjugated magnetic beads then bind the labeled cells and are removed on a magnetic rack, leaving highly purified NK cells in the unlabeled fraction. The NK cell isolation cocktail is incubated with the cell suspension for 10-15 min at room temperature, and the beads are incubated for 5 min before magnetic separation. Two successive separation rounds are performed, and the final suspension is centrifuged at 300 g for 5 min before resuspension. Purity is assessed by flow cytometry.
The kit is validated for mouse spleen samples only. Fresh spleen should be processed into a single-cell suspension by grinding through a 70 µm mesh nylon strainer, with excess connective tissue removed beforehand. Typically 2-4×10^8 splenocytes are obtained per mouse. The cell suspension is adjusted to 2×10^8 cells/mL in isolation buffer and should be used within 1-2 hours of preparation, because longer intervals reduce final purity and cell viability. The manual recommends keeping the whole process on ice except for the room-temperature incubations.
In the manual's example, NK cells were isolated from the spleen cells of C57BL/6 mice. Before sorting, CD3-NK1.1+ cells made up 4.2% of spleen cells. After isolation, the proportion of CD3-NK1.1+ cells was 95.1%, as measured by flow cytometry with fluorescent anti-mouse CD3 and anti-mouse CD161/NK1.1 antibodies. The sources do not report recovery, sensitivity, or precision figures for this kit.
| Product name: | GenieSort Mouse NK Cell Isolation Kit |
| SKU: | AKES219 |
| Target species: | Mouse |
| Cell type: | NK cells |
| Sample type: | Mouse spleen single-cell suspension |
| Isolation technology: | Negative isolation (magnetic) |
| Starting material: | 1 x 10^7 cells per assay |
| Reported purity example: | CD3-NK1.1+ cells increased from 4.2% to 95.1% after sorting |
- Negative selection: non-NK cells are labeled and depleted, leaving untouched NK cells
- Targets mouse NK cells from mouse spleen single-cell suspensions
- Isolated cells are free of antibodies and magnetic bead labels and remain in a naive, unstimulated state
- Requires a magnetic rack and a single-cell suspension filtered through a 70 µm strainer
- Protocol designed for isolation within 1-2 hours of spleen cell preparation
Differentially biotinylated monoclonal antibodies label non-NK cells in the splenocyte suspension. Streptavidin-conjugated magnetic beads then bind the biotinylated complexes, and a magnetic rack retains the labeled cells. The unlabeled NK cell fraction in the supernatant is collected. The kit was tested by magnetic cell separation followed by flow cytometric analysis of mouse spleen cells.
- Preparation of purified mouse NK cells for flow cytometry analysis
- Functional assays using isolated mouse NK cells in an unstimulated, naive state
- Downstream cell culture and cell-based experiments requiring antibody-free, bead-free NK cells
- Immunology studies of NK cell populations in mouse spleen
| Component | Quantity | Storage |
| Mouse NK Cell Beads Streptavidin 1.0-N | 21 µL per assay | 2-8°C |
| Mouse NK Cell Isolation Cocktail | 7 µL per assay | 2-8°C |
- Phosphate-buffered saline (PBS)
- Fetal bovine serum (FBS)
- EDTA
- 0.22 µm filter
- Disposable sterile syringe
- 70 µm mesh nylon cell strainer
- Ophthalmic scissors and forceps
- 15 mL centrifuge tubes, 1.5 mL or 2 mL microcentrifuge tubes, and flow cytometry tubes
- 5 cm culture dish
- Low-adsorption pipette tips
- Optical microscope
- Horizontal centrifuge
- Magnetic rack (user-supplied; 5 mL tube compatible for the 2.5 mL isolation step)
Mouse spleen (single-cell suspension)
- Prepare isolation buffer: add fetal bovine serum to a final concentration of 2% and EDTA to a final concentration of 2 mM to PBS. Filter the buffer through a 0.22 µm filter. Perform all steps under sterile conditions.
- Store the prepared isolation buffer sealed at 4°C and use it within 1 week.
- Use fresh mouse spleen, trimming away excessive connective tissue.
- Grind the spleen through a 70 µm mesh nylon strainer. Rinse the strainer with pre-cooled PBS and collect the cell suspension in a 15 mL centrifuge tube.
- Centrifuge at 300 g for 5 min. Discard the supernatant.
- Resuspend the splenocytes in isolation buffer, filter the cells through a 70 µm mesh nylon strainer, and count the cells.
- Adjust the cell density to 2×10^8 cells/mL with isolation buffer.
- Perform cell isolation within 1-2 hours of preparing the single-cell suspension.
- For the standard assay, transfer 50 µL of cell suspension (about 1×10^7 cells) for isolation. Dilution guidance: if more than 1×10^7 cells are to be isolated, increase the isolation cocktail and beads proportionally while keeping the cell density at 2×10^8 cells/mL. If fewer than 1×10^7 cells are to be isolated, resuspend the cells in 50 µL isolation buffer and use 7 µL isolation cocktail and 21 µL washed beads.
Isolation buffer preparation
- Add FBS to PBS to a final concentration of 2%, and EDTA to a final concentration of 2 mM.
- Filter the buffer through a 0.22 µm filter.
- Store the sealed buffer at 4°C and use within 1 week.
Mouse spleen single-cell suspension
- Use fresh mouse spleen and trim excess connective tissue.
- Grind the spleen through a 70 µm mesh strainer, rinse with pre-cooled PBS, and collect cells in a 15 mL tube.
- Centrifuge at 300 g for 5 min and discard the supernatant.
- Resuspend splenocytes in isolation buffer, filter through a 70 µm strainer, and count cells.
- Adjust cell density to 2 x 10^8 cells/mL.
- Begin cell isolation within 1-2 hours of preparing the suspension.
Cell isolation
- Prepare 50 µL of cell suspension (about 1 x 10^7 cells) and add 7 µL of Mouse NK Cell Isolation Cocktail. Pipette to mix and incubate for 10-15 min at room temperature.
- Add isolation buffer to a final volume of 2 mL and centrifuge at 300 g for 5 min. Discard the supernatant and resuspend cells in 50 µL isolation buffer (volume equal to the input cell suspension).
- Wash 21 µL of Mouse NK Cell Beads Streptavidin 1.0-N in 1 mL isolation buffer on the magnetic rack for 5 min. Discard the supernatant.
- Resuspend the washed beads in the cell suspension, mix by pipetting 6-8 times, and incubate for 5 min at room temperature.
- Add isolation buffer to a final volume of 2.5 mL, mix until no bead particles are visible, and place the tube on a magnetic rack for 5 min.
- Transfer the supernatant containing the unlabeled NK cells to a clean tube. This is the first isolation.
- Remove the tube from the rack, add isolation buffer to 2.5 mL, mix, and return to the rack for 5 min.
- Transfer the supernatant to the tube from the first isolation, combine, and centrifuge at 300 g for 5 min.
- Discard the supernatant and resuspend cells in buffer appropriate for downstream use.
What sample type does the kit support?
The kit is suitable for isolating NK cells from mouse spleen samples only. The isolated cells can be used directly in downstream applications.
How should spleen samples be handled before isolation?
Prepare a single-cell suspension from fresh spleen, filter it through a 70 µm mesh nylon strainer, and adjust the density to 2×10^8 cells/mL. Perform isolation within 1-2 hours of preparing the suspension, because longer intervals reduce purity and viability.
How should the kit and prepared buffer be stored?
Store the kit at 2-8°C with shading light for 1 year, and avoid freezing and thawing. Store the prepared isolation buffer sealed at 4°C and use it within 1 week.
What is the standard input and what should be done if the cell number differs?
The standard assay uses 50 µL of cell suspension (about 1×10^7 cells) with 7 µL isolation cocktail and 21 µL beads. If more than 1×10^7 cells are isolated, scale the cocktail and beads proportionally while keeping 2×10^8 cells/mL. If fewer than 1×10^7 cells are isolated, use 7 µL cocktail and 21 µL washed beads in 50 µL isolation buffer.
What factors affect purity?
Sample type, sample preparation, and experimental operation all affect the final purity of the isolated cells. Filter the single-cell suspension to remove clumps and debris, and pipette antibody cocktail and beads directly to the bottom of the tube to avoid losses from wall adhesion. Use low-adsorption pipette tips and centrifuge tubes, and use the kit with a magnetic rack.
What instrument and tube settings are needed, and how long does the procedure take?
Use a horizontal centrifuge and a magnetic rack. A 5 mL flow tube suits suspensions up to 1 mL (2×10^8 cells), and a 10 mL or 15 mL centrifuge tube suits suspensions up to 4 mL (8×10^8 cells). The cocktail incubation takes 10-15 min at room temperature, the bead incubation takes 5 min, and each of the two magnetic separations takes 5 min, in addition to centrifugation steps.
| Storage: | Store at 2-8°C, protected from light, for 1 year |
| Freeze-thaw: | Avoid freezing and thawing the beads |
| Shelf life: | 12 months |
| Shipping: | Ice bag |
Cautions
- For research use only. Not for use in diagnostic or therapeutic procedures.
- Follow safety precautions and standard laboratory reagent handling procedures.
- Filter single-cell suspensions through a cell strainer to remove clumps and tissue debris, which can compromise purity.
- Perform isolation immediately after preparing the cell suspension, as viability decreases with storage time.
- Pipette the antibody cocktail and beads directly to the bottom of the tube to avoid loss from tube walls.
- Keep the procedure on ice as much as possible, except during room-temperature incubations, to maintain cell activity.
- Use low-adsorption pipette tips and centrifuge tubes to limit loss of beads and antibodies.
- The kit must be used with a magnetic rack.
- Sample type, sample preparation, and technique strongly affect final isolated cell purity.