Product Name:	Human BMPR1A / ALK3 ELISA Kit
Product Code:	HUFI00502
Size:	96 Assays
Alias:	BMPR-1A, Bone morphogenetic protein receptor type-1A, BMPR1A, BMPR-IA, ALK-3, CD292, SKR5, ALK3, BMP type-1A receptor, CD292 antigen, Serine, threonine-protein kinase receptor R5, type II-like kinase 3
Detection method:	Sandwich ELISA, Double Antibody
Application:	This immunoassay kit allows for the in vitro quantitative determination of Human BMPR1A concentrations in serum plasma and other biological fluids.
Sensitivity:	0.188ng/ml
Range:	0.313-20ng/ml
Storage:	4°C for 6 months
Note:	For Research Use Only

Recovery:

Matrices listed below were spiked with certain level of Human BMPR1A and the recovery rates were calculated by comparing the measured value to the expected amount of Human BMPR1A in samples.

Matrix	Recovery range(%)	Average(%)
serum(n=5)	90-105	97
EDTA plasma(n=5)	93-104	98
UFH plasma(n=5)	86-103	94

Linearity:

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human BMPR1A and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample	1:2	1:4	1:8
serum(n=5)	86-100%	86-102%	92-104%
EDTA plasma(n=5)	82-100%	84-98%	87-98%
UFH plasma(n=5)	80-93%	82-100%	90-97%

CV(%):

Intra-Assay: CV<8%
Inter-Assay: CV<10%

Component	Quantity	Storage
ELISA Microplate (Dismountable)	8×12 strips	4°C for 6 months
Lyophilized Standard	2	4°C/-20°C
Sample/Standard Dilution Buffer	20ml	4°C
Biotin-labeled Antibody(Concentrated)	120ul	4°C (Protect from light)
Antibody Dilution Buffer	10ml	4°C
HRP-Streptavidin Conjugate(SABC)	120ul	4°C (Protect from light)
SABC Dilution Buffer	10ml	4°C
TMB Substrate	10ml	4°C (Protect from light)
Stop Solution	10ml	4°C
Wash Buffer(25X)	30ml	4°C
Plate Sealer	5	-

Other materials and equipment required:

Microplate reader with 450 nm wavelength filter
Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
Incubator
Deionized or distilled water
Absorbent paper
Buffer resevoir

Uniprot

P36894

UniProt Protein Function:	BMPR1A: a serine/threonine-protein kinase receptor for Bone morphogenetic protein-2 and -4 (BMP-2 and BMP-4). Defects in BMPR1A are a cause of juvenile polyposis syndrome (JPS) and Cowden disease (CD), a cancer syndrome characterized by multiple hamartomas and by a high risk for breast, thyroid and endometriel cancers.
UniProt Protein Details:	Protein type:Protein kinase, Ser/Thr (receptor); Kinase, protein; Membrane protein, integral; Protein kinase, TKL; EC 2.7.11.30; TKL group; STKR family; Type1 subfamily Chromosomal Location of Human Ortholog: 10q22.3 Cellular Component: cell soma; dendrite; integral to membrane; plasma membrane; caveola Molecular Function:transforming growth factor beta receptor activity; protein serine/threonine kinase activity; protein binding; protein homodimerization activity; metal ion binding; SMAD binding; ATP binding; transmembrane receptor protein serine/threonine kinase activity; receptor signaling protein serine/threonine kinase activity Biological Process: neural plate mediolateral pattern formation; transcription from RNA polymerase II promoter; developmental growth; hindlimb morphogenesis; neural crest cell development; positive regulation of transcription, DNA-dependent; paraxial mesoderm structural organization; mesendoderm development; dorsal/ventral axis specification; palate development; protein amino acid phosphorylation; negative regulation of neurogenesis; BMP signaling pathway; transforming growth factor beta receptor signaling pathway; positive regulation of mesenchymal cell proliferation; ectoderm development; Mullerian duct regression; somitogenesis; in utero embryonic development; lateral mesoderm development; stem cell maintenance; positive regulation of bone mineralization; odontogenesis of dentine-containing teeth; positive regulation of osteoblast differentiation; mesoderm formation; pituitary gland development; cartilage development; embryonic organ development; immune response; embryonic digit morphogenesis; regulation of lateral mesodermal cell fate specification; positive regulation of epithelial cell proliferation; lung development Disease: Juvenile Polyposis Syndrome; Polyposis Syndrome, Hereditary Mixed, 2
NCBI Summary:	The bone morphogenetic protein (BMP) receptors are a family of transmembrane serine/threonine kinases that include the type I receptors BMPR1A and BMPR1B and the type II receptor BMPR2. These receptors are also closely related to the activin receptors, ACVR1 and ACVR2. The ligands of these receptors are members of the TGF-beta superfamily. TGF-betas and activins transduce their signals through the formation of heteromeric complexes with 2 different types of serine (threonine) kinase receptors: type I receptors of about 50-55 kD and type II receptors of about 70-80 kD. Type II receptors bind ligands in the absence of type I receptors, but they require their respective type I receptors for signaling, whereas type I receptors require their respective type II receptors for ligand binding. [provided by RefSeq, Jul 2008]
UniProt Code:	P36894
NCBI GenInfo Identifier:	61252444
NCBI Gene ID:	657
NCBI Accession:	P36894.2
UniProt Secondary Accession:	P36894,Q8NEN8, A8K6U9,
UniProt Related Accession:	P36894
Molecular Weight:	Calculated: 60kDaObserved: 69kDa
NCBI Full Name:	Bone morphogenetic protein receptor type-1A
NCBI Synonym Full Names:	bone morphogenetic protein receptor, type IA
NCBI Official Symbol:	BMPR1A
NCBI Official Synonym Symbols:	ALK3; SKR5; CD292; ACVRLK3; 10q23del
NCBI Protein Information:	bone morphogenetic protein receptor type-1A; ALK-3; BMPR-1A; BMP type-1A receptor; activin receptor-like kinase 3; activin A receptor, type II-like kinase 3; serine/threonine-protein kinase receptor R5
UniProt Protein Name:	Bone morphogenetic protein receptor type-1A
UniProt Synonym Protein Names:	Activin receptor-like kinase 3; ALK-3; Serine/threonine-protein kinase receptor R5; SKR5; CD_antigen: CD292
Protein Family:	Bone morphogenetic protein receptor
UniProt Gene Name:	BMPR1A
UniProt Entry Name:	BMR1A_HUMAN

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.

Step	Protocol
1.	Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.	Aliquot 0.1ml standard solutions into the standard wells.
3.	Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.	Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.	Seal the plate with a cover and incubate at 37 °C for 90 min.
6.	Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.	Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.	Seal the plate with a cover and incubate at 37°C for 60 min.
9.	Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.	Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.	Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.	Add 90 Âµl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.	Add 50 Âµl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14.	Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type	Protocol
Serum	If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.
Plasma	Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid	Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatant	Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysates	Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenates	The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysates	Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk	Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Illuminating the Multifaceted Role of Acetylation: Bridging Chemistry and Biology Introduction:

Understanding IgA Test: Importance, Procedure, and Interpretation

Biomarker Testing: Advancements, Applications, and Future Directions

Human BMPR1A / ALK3 ELISA Kit

Description