Human CRT / Calreticulin ELISA Kit
- SKU:
- HUFI01371
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- P27797
- Sensitivity:
- 0.094ng/ml
- Range:
- 0.156-10ng/ml
- ELISA Type:
- Sandwich
- Synonyms:
- CALR, CRT, Calreticulin, grp60, HACBP, Endoplasmic reticulum resident protein60, ERp60, CRP55, CRTC, calregulin, CaBP3, calsequestrin-like protein, endoplasmic reticulum resident protein 60
- Reactivity:
- Human
- Research Area:
- Cell Biology
Description
Human CRT / Calreticulin ELISA Kit
Calreticulin is a highly conserved chaperone protein that is found primarily in the endoplasmic reticulum and plays a role in a number of cellular processes, including cell adhesion. CRT/Calreticulin helps maintain calcium homeostasis and controls protein folding quality. Calreticulin is also found in the nucleus, implying that it may play a role in transcription control. Increased autoantibody titers against calreticulin are linked to systemic lupus erythematosus. Calreticulin mutations have been linked to a variety of neoplasms, including myeloproliferative neoplasms. HIV Life Cycle and Protein Metabolism are two pathways associated with CRT/Calreticulin.
| Product Name: | Human CRT / Calreticulin ELISA Kit |
| Product Code: | HUFI01371 |
| Size: | 96 Assays |
| Alias: | CALR, CRT, Calreticulin, grp60, HACBP, Endoplasmic reticulum resident protein60, ERp60, CRP55, CRTC, calregulin, CaBP3, calsequestrin-like protein, endoplasmic reticulum resident protein 60 |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Human CALR concentrations in serum plasma and other biological fluids. |
| Sensitivity: | 0.094ng/ml |
| Range: | 0.156-10ng/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Human CALR and the recovery rates were calculated by comparing the measured value to the expected amount of Human CALR in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human CALR and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| Uniprot | P27797 |
| UniProt Protein Function: | Calreticulin: Calcium-binding chaperone that promotes folding, oligomeric assembly and quality control in the endoplasmic reticulum (ER) via the calreticulin/calnexin cycle. This lectin interacts transiently with almost all of the monoglucosylated glycoproteins that are synthesized in the ER. Interacts with the DNA-binding domain of NR3C1 and mediates its nuclear export. Involved in maternal gene expression regulation. May participate in oocyte maturation via the regulation of calcium homeostasis. Monomer. Component of an EIF2 complex at least composed of CELF1/CUGBP1, CALR, CALR3, EIF2S1, EIF2S2, HSP90B1 and HSPA5. Interacts with PDIA3/ERp57. Interacts with NR3C1 and TRIM21. Interacts with GABARAP. Belongs to the calreticulin family. |
| UniProt Protein Details: | Protein type:Calcium-binding; Motility/polarity/chemotaxis; Nuclear receptor co-regulator; Secreted; Secreted, signal peptide Chromosomal Location of Human Ortholog: 19p13.13 Cellular Component: cell surface; cytoplasm; cytosol; endoplasmic reticulum; endoplasmic reticulum lumen; extracellular region; extracellular space; focal adhesion; intracellular; membrane; nucleus; perinuclear region of cytoplasm; polysome Molecular Function:androgen receptor binding; calcium ion binding; carbohydrate binding; chaperone binding; complement component C1q binding; glycoprotein binding; integrin binding; mRNA binding; protein binding; ubiquitin protein ligase binding; unfolded protein binding; zinc ion binding Biological Process: antigen processing and presentation of peptide antigen via MHC class I; cellular calcium ion homeostasis; glucocorticoid receptor signaling pathway; negative regulation of neuron differentiation; negative regulation of retinoic acid receptor signaling pathway; negative regulation of steroid hormone receptor signaling pathway; negative regulation of transcription from RNA polymerase II promoter; negative regulation of transcription, DNA-dependent; negative regulation of translation; peptide antigen assembly with MHC class I protein complex; positive regulation of cell cycle; positive regulation of cell proliferation; positive regulation of DNA replication; positive regulation of phagocytosis; protein export from nucleus; protein folding; protein maturation via protein folding; protein stabilization; receptor-mediated endocytosis; regulation of apoptosis; regulation of transcription, DNA-dependent; sequestering of calcium ion Disease: Myelofibrosis; Thrombocythemia 1 |
| NCBI Summary: | Calreticulin is a multifunctional protein that acts as a major Ca(2+)-binding (storage) protein in the lumen of the endoplasmic reticulum. It is also found in the nucleus, suggesting that it may have a role in transcription regulation. Calreticulin binds to the synthetic peptide KLGFFKR, which is almost identical to an amino acid sequence in the DNA-binding domain of the superfamily of nuclear receptors. Calreticulin binds to antibodies in certain sera of systemic lupus and Sjogren patients which contain anti-Ro/SSA antibodies, it is highly conserved among species, and it is located in the endoplasmic and sarcoplasmic reticulum where it may bind calcium. The amino terminus of calreticulin interacts with the DNA-binding domain of the glucocorticoid receptor and prevents the receptor from binding to its specific glucocorticoid response element. Calreticulin can inhibit the binding of androgen receptor to its hormone-responsive DNA element and can inhibit androgen receptor and retinoic acid receptor transcriptional activities in vivo, as well as retinoic acid-induced neuronal differentiation. Thus, calreticulin can act as an important modulator of the regulation of gene transcription by nuclear hormone receptors. Systemic lupus erythematosus is associated with increased autoantibody titers against calreticulin but calreticulin is not a Ro/SS-A antigen. Earlier papers referred to calreticulin as an Ro/SS-A antigen but this was later disproven. Increased autoantibody titer against human calreticulin is found in infants with complete congenital heart block of both the IgG and IgM classes. [provided by RefSeq, Jul 2008] |
| UniProt Code: | P27797 |
| NCBI GenInfo Identifier: | 117501 |
| NCBI Gene ID: | 811 |
| NCBI Accession: | P27797.1 |
| UniProt Secondary Accession: | P27797,Q6IAT4, Q9UDG2, |
| UniProt Related Accession: | P27797 |
| Molecular Weight: | 48,142 Da |
| NCBI Full Name: | Calreticulin |
| NCBI Synonym Full Names: | calreticulin |
| NCBI Official Symbol: | CALR |
| NCBI Official Synonym Symbols: | RO; CRT; SSA; cC1qR; HEL-S-99n |
| NCBI Protein Information: | calreticulin |
| UniProt Protein Name: | Calreticulin |
| UniProt Synonym Protein Names: | CRP55; Calregulin; Endoplasmic reticulum resident protein 60; ERp60; HACBP; grp60 |
| Protein Family: | Calreticulin |
| UniProt Gene Name: | CALR |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Rat CRT / Calreticulin ELISA Kit
Human Calreticulin (CRT) ELISA Kit
Human CRT (Calreticulin) ELISA Kit (HUES01790)
