Human IFNAR1 / Interferon alpha / beta receptor 1 ELISA Kit
- SKU:
- HUFI01301
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- P17181
- Sensitivity:
- 0.094ng/ml
- Range:
- 0.156-10ng/ml
- ELISA Type:
- Sandwich
- Synonyms:
- IFNAR1, Interferon alpha, beta receptor 1, IFN-R-1, IFN-alpha, beta receptor 1, Type I interferon receptor 1, Cytokine receptor class-II member 1, Cytokine receptor family 2 member 1, CRF2-1, IFNAR, alpha-type antiviral protein, AVP, beta-type antivi
- Reactivity:
- Human
- Research Area:
- Cell Biology
Frequently bought together:
Description
Human IFNAR1 / Interferon alpha / beta receptor 1 ELISA Kit
IFNAR1 codes for a type I membrane protein that forms one of the two chains of an interferon alpha and beta receptor. The receptor's binding and activation activates Janus protein kinases, which then phosphorylate a number of proteins, including STAT1 and STAT2. The protein works as an antiviral agent and belongs to the type II cytokine receptor family. Yellow Fever and Papillomavirus are two diseases linked to IFNAR1. Interferon Pathway and Interferon Gamma Signaling are two related pathways associated with IFNAR1.
| Product Name: | Human IFNAR1 / Interferon alpha / beta receptor 1 ELISA Kit |
| Product Code: | HUFI01301 |
| Size: | 96 Assays |
| Alias: | IFNAR1, Interferon alpha, beta receptor 1, IFN-R-1, IFN-alpha, beta receptor 1, Type I interferon receptor 1, Cytokine receptor class-II member 1, Cytokine receptor family 2 member 1, CRF2-1, IFNAR, alpha-type antiviral protein, AVP, beta-type antiviral protein, CRF2-1, Human interferon-alpha receptor, HuIFN-alpha-Rec10IFRC, IFNBR, interferon, alpha, beta and omega receptor 1, interferon-alpha, beta receptor alpha chain |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Human IFNAR1 concentrations in serum plasma and other biological fluids. |
| Sensitivity: | 0.094ng/ml |
| Range: | 0.156-10ng/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Human IFNAR1 and the recovery rates were calculated by comparing the measured value to the expected amount of Human IFNAR1 in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human IFNAR1 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| Uniprot | P17181 |
| UniProt Protein Function: | IFNAR1: receptor for interferons alpha and beta. Belongs to the type II cytokine family of receptors. Binding to type I IFNs triggers tyrosine phosphorylation of a number of proteins including JAKs, TYK2, STAT proteins and IFNR alpha- and beta-subunits themselves. Tyk2 tyrosine kinase is essential for stable cell surface expression of IFNAR1. Present in all tissues and even on the surface of most IFN-resistant cells. |
| UniProt Protein Details: | Protein type:Receptor, cytokine; Membrane protein, integral Chromosomal Location of Human Ortholog: 21q22.11 Cellular Component: integral to plasma membrane; integral to membrane; plasma membrane Molecular Function:protein binding; interferon receptor activity; interferon-alpha/beta receptor activity Biological Process: positive regulation of interferon-gamma production; cell surface receptor linked signal transduction; T cell activation; cytokine and chemokine mediated signaling pathway; response to virus; positive regulation of interleukin-1 beta secretion; interferon type I biosynthetic process; JAK-STAT cascade; defense response to virus |
| NCBI Summary: | The protein encoded by this gene is a type I membrane protein that forms one of the two chains of a receptor for interferons alpha and beta. Binding and activation of the receptor stimulates Janus protein kinases, which in turn phosphorylate several proteins, including STAT1 and STAT2. The encoded protein also functions as an antiviral factor. [provided by RefSeq, Jul 2008] |
| UniProt Code: | P17181 |
| NCBI GenInfo Identifier: | 90110827 |
| NCBI Gene ID: | 3454 |
| NCBI Accession: | P17181.3 |
| UniProt Secondary Accession: | P17181,Q53GW9, Q53H11, Q6PKD7, Q7M4L2, Q8WTZ2, B2R6L9 B4DNT3, D3DSF0, |
| UniProt Related Accession: | P17181 |
| Molecular Weight: | Calculated MW: 49kDa/56kDa/63kDaObserved MW: 70kDa |
| NCBI Full Name: | Interferon alpha/beta receptor 1 |
| NCBI Synonym Full Names: | interferon (alpha, beta and omega) receptor 1 |
| NCBI Official Symbol: | IFNAR1 |
| NCBI Official Synonym Symbols: | AVP; IFRC; IFNAR; IFNBR; IFN-alpha-REC |
| NCBI Protein Information: | interferon alpha/beta receptor 1; CRF2-1; IFN-R-1; IFN-alpha/beta receptor 1; interferon-beta receptor 1; beta-type antiviral protein; alpha-type antiviral protein; type I interferon receptor 1; cytokine receptor class-II member 1; cytokine receptor family 2 member 1; interferon-alpha/beta receptor alpha chain |
| UniProt Protein Name: | Interferon alpha/beta receptor 1 |
| UniProt Synonym Protein Names: | Cytokine receptor class-II member 1; Cytokine receptor family 2 member 1; CRF2-1; Type I interferon receptor 1 |
| Protein Family: | Interferon alpha/beta receptor |
| UniProt Gene Name: | IFNAR1 |
| UniProt Entry Name: | INAR1_HUMAN |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Porcine Interferon alpha/beta receptor 1 (IFNAR1) ELISA Kit (PREB0385)
€699
Bovine Interferon alpha/beta receptor 1 (IFNAR1) ELISA Kit (BOEB0678)
€699
Mouse Interferon alpha/beta receptor 1 (Ifnar1) ELISA Kit (MOEB1276)
€649
Bovine IFNAR1(Interferon alpha/beta receptor 1) ELISA Kit
€649
Human Interferon alpha/beta receptor 1 (IFNAR1) ELISA Kit (HUEB1509)
€649