null

Human IL-10 ELISA Kit

SKU:
HUFI00156
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
P22301
Sensitivity:
4.688pg/ml
Range:
7.813-500pg/ml
ELISA Type:
Sandwich
Synonyms:
IL-10, IL10, IL10A, CSIF, TGIF
Reactivity:
Human
€499
Frequently bought together:

Description

Human IL-10 ELISA Kit

Interleukin (IL)-10 is a crucial cytokine known for its potent anti-inflammatory properties, along with TGF-β and IL-35. It is primarily produced by activated immune cells, particularly monocytes/macrophages, as well as specific subsets of T cells such as Tr1, Treg, and Th1 cells. IL-10 exerts its effects by binding to a transmembrane receptor complex comprised of IL-10R1 and IL-10R2, which in turn regulates the functions of various immune cells. The Assay Genie Human IL-10 ELISA Kit is a highly sensitive assay for the quantitative measurement of IL-10 in serum, plasma, cell culture supernatant and tissue samples.

system_update_alt Datasheet system_update_alt MSDS

Key Features

Save Time Pre-coated 96 well plate
Quick Start Kit includes all necessary reagents
Publication Ready Reproducible and reliable results

Overview

Product Name:

Human IL-10 ELISA Kit

Product Code:

HUFI00156

Size:

96 Assays

Alias:

IL-10, IL10, IL10A, CSIF, TGIF

Detection Method:

Sandwich ELISA, Double Antibody

Application:

This immunoassay kit allows for the in vitro quantitative determination of Human IL-10 concentrations in serum plasma and other biological fluids.

Sensitivity:

4.688pg/ml

Range:

7.813-500pg/ml

Storage:

4°C for 6 months

Note:

For Research Use Only

Additional Information

Recovery

Matrices listed below were spiked with certain level of Human IL-10 and the recovery rates were calculated by comparing the measured value to the expected amount of Human IL-10 in samples.

Matrix

Recovery Range (%)

Average (%)

serum(n=5)

86-101

94

EDTA plasma(n=5)

86-101

94

UFH plamsa(n=5)

87-102

95

Linearity

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human IL-10 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample

1:2

1:4

1:8

serum(n=5)

86-105%

92-98%

88-105%

EDTA plasma(n=5)

89-99%

87-95%

82-99%

UFH plasma(n=5)

82-97%

81-97%

81-100%

Linearity

Intra-Assay: CV<8%
Inter-Assay: CV<10%

Kit Components

Component Quantity Storage

ELISA Microplate (Dismountable)

8x12 strips

4°C for 6 months

Lyophilized Standard

2

4°C/ -20°C

Sample/Standard Dlution Buffer

20ml

4°C

Biotin-labeled Antibody (Concentrated)

120ul

4°C (Protection from light)

Antibody Dilution Buffer

10ml

4°C

HRP-Streptavidin Conjugate (SABC)

120ul

4°C (Protect from light)

SABC Dilution Buffer

10ml

4°C

TMB Substrate

10ml

4°C (Protection from light)

Stop Solution

10ml

4°C

Wash Buffer (25X)

30ml

4°C

Plate Sealer

5

-

Other materials required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir

Protein Information

Heading 1 Heading 2

UniProt

NCBI GenInfo Identifier

NCBI Gene ID

Molecular Weight

20,517 Da

Protein Family

Interleukin

Protocol

*Note: Protocols are specific to each batch/lot. For the exact instructions please follow the protocol included in your kit.

Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.

Step Procedure

1.

Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!

2.

Aliquot 0.1ml standard solutions into the standard wells.

3.

Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.

4.

Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.

5.

Seal the plate with a cover and incubate at 37 °C for 90 min.

6.

Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.

7.

Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.

8.

Seal the plate with a cover and incubate at 37°C for 60 min.

9.

Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.

10.

Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.

11.

Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.

12.

Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.

13.

Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.

14.

Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

Sample Type

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol

Serum

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

Plasma

Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.

Urine & Cerebrospinal Fluid

Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.

Cell culture supernatant

Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.

Cell lysates

Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.

Tissue homogenates

The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.

Tissue lysates

Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C

Breast Milk

Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

IL-10 Background

Interleukin - 10

Interleukin (IL)-10 is a crucial cytokine known for its potent anti-inflammatory properties, along with TGF-β and IL-35. It is primarily produced by activated immune cells, particularly monocytes/macrophages, as well as specific subsets of T cells such as Tr1, Treg, and Th1 cells. IL-10 exerts its effects by binding to a transmembrane receptor complex comprised of IL-10R1 and IL-10R2, which in turn regulates the functions of various immune cells. Notably, in monocytes/macrophages, IL-10 reduces the production of inflammatory mediators and inhibits antigen presentation while promoting the uptake of antigens. Moreover, IL-10 plays a significant role in the biology of B cells and T cells. This cytokine holds great physiological importance in preventing and limiting excessive immune reactions, both specific and non-specific, thereby protecting tissues from damage. Simultaneously, IL-10 enhances the "scavenger" function and contributes to induced tolerance.

IL-10 gene

The human IL-10 gene is situated on Chromosome-1 and encodes a protein consisting of 178 amino acids. Following the removal of the N-terminal 18 amino acid signal sequence, the mature IL-10 protein is composed of 160 amino acids. This protein sequence is crucial for the biological activity of IL-10, enabling it to fulfill its role as a key regulatory cytokine in immune response modulation.

IL-10 Receptor

The IL-10 receptor is a complex composed of two IL-10Rα (also known as IL-10R1) molecules, encoded by the Il10ra gene, and two IL-10Rβ (also known as IL-10R2) molecules, encoded by the Il10rb gene. All cells that respond to IL-10 express IL-10Rα, and blocking the surface receptor with antibodies can inhibit its responsiveness. IL-10Rα is expressed at a basal level in most hematopoietic cells, but its expression is increased in various cell types upon activation, indicating its significance in inhibitory pathways. This suggests that IL-10Rα plays an important role in regulating immune responses and modulating cell activation.

IL-10 ELISA Kit FAQs

What is the IL-10 ELISA Kit used for?

The Human IL-10 ELISA Kit is specifically designed for the quantitative detection of Interleukin-10 (IL-10) in human biological samples. IL-10 is an important cytokine involved in immune regulation and inflammation. This kit enables researchers and clinicians to accurately measure IL-10 levels, facilitating studies related to autoimmune diseases, allergic reactions, inflammatory disorders, and immunotherapy.

What are the advantages of using the IL-10 ELISA Kit?

The IL-10 ELISA Kit offers several advantages, including high sensitivity, accuracy, and reproducibility. It provides a user-friendly and reliable method to quantify IL-10 levels in biological specimens, allowing for precise measurements and robust data analysis.

What sample types are compatible with the IL-10 ELISA Kit?

The IL-10 ELISA Kit is compatible with various sample types, including serum, plasma, cell lysates, and tissue homogenates. It provides flexibility in sample selection, allowing researchers to analyze IL-10 levels in different biological matrices.

What are the storage requirements for the IL-10 ELISA Kit?

The IL-10 ELISA Kit components should be stored according to the instructions provided in the kit manual. Generally, it is recommended to store the kit components at the recommended temperature to ensure their stability and optimal performance.

What should I do if my assay results are not optimal?

If you encounter any issues or have suboptimal assay results, we recommend contacting our dedicated support team for assistance. They will be available to provide troubleshooting guidance, answer your questions, and ensure you achieve the best possible results with the IL-10 ELISA Kit.

Citations

Mohamed et al.MicroRNAs and cytokines as potential predictive biomarkers for COVID-19 disease progressionScientific reports 2023PubMed ID: 36864077