Human IL-18 ELISA Kit (HUES01492)
- Product Type:
- ELISA Kit
- 96 Assays
- ELISA Type:
- IL18, IGIF, IL-1g, IL-1F4, Interferon-gamma-inducing factor
- Tested Sample Types:
- Serum, plasma and other biological fluids
|Detection Range:||15.63-1000 pg/mL|
|Sample Volume Required Per Well:||100µL|
|Sample Type:||Serum, plasma and other biological fluids|
|Specificity:||This kit recognizes Human IL18 ELISA Kit in samples. No significant cross-reactivity or interference between Human IL18 ELISA Kit and analogues was observed.|
This ELISA kit uses Sandwich-ELISA as the method. The micro ELISA plate provided in this kit has been pre-coated with an antibody specific to Human IL18. Standards or samples are added to the appropriate micro ELISA plate wells and combined with the specific antibody. Then a biotinylated detection antibody specific for Human IL18 and Avidin-Horseradish Peroxidase (HRP) conjugate are added to each micro plate well successively and incubated. Free components are washed away. The substrate solution is added to each well. Only those wells that contain Human IL18, biotinylated detection antibody and Avidin-HRP conjugate will appear blue in color. The enzyme-substrate reaction is terminated by adding Stop Solution and the color turns yellow. The optical density (OD) is measured spectrophotometrically at a wavelength of 450 nm ± 2 nm. The OD value is proportional to the concentration of Human IL18. The concentration of Human IL18 in samples can be calculated by comparing the OD of the samples to the standard curve.
|UniProt Protein Function:||IL18: Augments natural killer cell activity in spleen cells and stimulates interferon gamma production in T-helper type I cells. Belongs to the IL-1 family.|
|UniProt Protein Details:|
Chromosomal Location of Human Ortholog: 11q22. 2-q22. 3
Cellular Component: extracellular space; extracellular region; cytosol
Molecular Function:protein binding; cytokine activity
Biological Process: positive regulation of granulocyte macrophage colony-stimulating factor production; positive regulation of NK T cell proliferation; natural killer cell activation; positive regulation of NF-kappaB import into nucleus; positive regulation of activated T cell proliferation; chemokine biosynthetic process; cell-cell signaling; lipopolysaccharide-mediated signaling pathway; granulocyte macrophage colony-stimulating factor biosynthetic process; angiogenesis; inflammatory response; positive regulation of interleukin-17 production; regulation of cell adhesion; positive regulation of natural killer cell proliferation; T-helper 1 type immune response; T-helper 2 type immune response; interleukin-2 biosynthetic process; MAPKKK cascade; interleukin-13 biosynthetic process; sleep; positive regulation of tissue remodeling; positive regulation of interferon-gamma production; interferon-gamma biosynthetic process; immune response; negative regulation of myoblast differentiation; positive regulation of inflammatory response
|NCBI Summary:||The protein encoded by this gene is a proinflammatory cytokine that augments natural killer cell activity in spleen cells, and stimulates interferon gamma production in T-helper type I cells. Alternatively spliced transcript variants encoding different isoforms have been found for this gene. [provided by RefSeq, Aug 2011]|
|NCBI GenInfo Identifier:||3219817|
|NCBI Gene ID:||3606|
|NCBI Accession:||Q14116. 1|
|UniProt Secondary Accession:||Q14116,O75599, Q6FGY3, Q6WWJ7,|
|UniProt Related Accession:||Q14116|
|Molecular Weight:||21,896 Da|
|NCBI Full Name:||Interleukin-18|
|NCBI Synonym Full Names:||interleukin 18|
|NCBI Official Symbol:||IL18|
|NCBI Official Synonym Symbols:||IGIF; IL-18; IL-1g; IL1F4|
|NCBI Protein Information:||interleukin-18; IL-1 gamma; iboctadekin; interleukin-1 gamma; IFN-gamma-inducing factor; interleukin 18 (interferon-gamma-inducing factor)|
|UniProt Protein Name:||Interleukin-18|
|UniProt Synonym Protein Names:||Iboctadekin; Interferon gamma-inducing factor; IFN-gamma-inducing factor; Interleukin-1 gamma; IL-1 gamma|
|UniProt Gene Name:||IL18|
|UniProt Entry Name:||IL18_HUMAN|
As the OD values of the standard curve may vary according to the conditions of the actual assay performance (e. g. operator, pipetting technique, washing technique or temperature effects), the operator should establish a standard curve for each test. Typical standard curve and data is provided below for reference only.
Intra-assay Precision (Precision within an assay): 3 samples with low, mid range and high level Human IL18 ELISA Kit were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, mid range and high level Human IL18 ELISA Kit were tested on 3 different plates, 20 replicates in each plate.
|Intra-assay Precision||Inter-assay Precision|
|C V (%)||6.04||4.67||4.81||6.88||4.37||3.59|
The recovery of Human IL18 ELISA Kit spiked at three different levels in samples throughout the range of the assay was evaluated in various matrices.
|Sample Type||Range (%)||Average Recovery (%)|
|EDTA plasma (n=5)||89-101||96|
|Cell culture media (n=5)||85-96||91|
Samples were spiked with high concentrations of Human IL18 ELISA Kit and diluted with Reference Standard & Sample Diluent to produce samples with values within the range of the assay.
|Serum (n=5)||EDTA plasma (n=5)||Cell culture media (n=5)|
An unopened kit can be stored at 4°C for 1 month. If the kit is not used within 1 month, store the items separately according to the following conditions once the kit is received.
|Micro ELISA Plate(Dismountable)||8 wells ×12 strips||-20°C, 6 months|
|Reference Standard||2 vials|
|Concentrated Biotinylated Detection Ab (100×)||1 vial, 120 µL|
|Concentrated HRP Conjugate (100×)||1 vial, 120 µL||-20°C(shading light), 6 months|
|Reference Standard & Sample Diluent||1 vial, 20 mL||4°C, 6 months|
|Biotinylated Detection Ab Diluent||1 vial, 14 mL|
|HRP Conjugate Diluent||1 vial, 14 mL|
|Concentrated Wash Buffer (25×)||1 vial, 30 mL|
|Substrate Reagent||1 vial, 10 mL||4°C(shading light)|
|Stop Solution||1 vial, 10 mL||4°C|
|Plate Sealer||5 pieces|
|Product Description||1 copy|
|Certificate of Analysis||1 copy|
- Set standard, test sample and control (zero) wells on the pre-coated plate and record theirpositions. It is recommended to measure each standard and sample in duplicate. Note: addall solutions to the bottom of the plate wells while avoiding contact with the well walls. Ensuresolutions do not foam when adding to the wells.
- Aliquot 100 µL of standard solutions into the standard wells.
- Add 100 µL of Sample / Standard dilution buffer into the control (zero) well.
- Add 100 µL of properly diluted sample (serum, plasma, tissue homogenates and otherbiological fluids) into test sample wells.
- Cover the plate with the sealer provided in the kit and incubate for 90 min at 37 °C.
- Aspirate the liquid from each well, do not wash. Immediately add 100 µL of BiotinylatedDetection Ab working solution to each well. Cover the plate with a plate seal and gently mix. Incubate for 1 hour at 37 °C.
- Aspirate or decant the solution from the plate and add 350 µL of wash buffer to each welland incubate for 1-2 minutes at room temperature. Aspirate the solution from each well andclap the plate on absorbent filter paper to dry. Repeat this process 3 times. Note: a microplatewasher can be used in this step and other wash steps.
- Add 100 µL of HRP Conjugate working solution to each well. Cover with a plate seal andincubate for 30 min at 37 °C.
- Aspirate or decant the solution from each well. Repeat the wash process for five times asconducted in step 7.
- Add 90 µL of Substrate Reagent to each well. Cover with a new plate seal and incubate forapproximately 15 min at 37 °C. Protect the plate from light. Note: the reaction time can beshortened or extended according to the actual color change, but not by more than 30min.
- Add 50 µL of Stop Solution to each well. Note: Adding the stop solution should be done inthe same order as the substrate solution.
- Determine the optical density (OD value) of each well immediately with a microplate readerset at 450 nm.