Human Kir4.1 / KCNJ10 ELISA Kit
- SKU:
- HUFI01974
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- P78508
- Sensitivity:
- 0.094ng/ml
- Range:
- 0.156-10ng/ml
- ELISA Type:
- Sandwich
- Synonyms:
- KCNJ10, ATP-dependent inwardly rectifying potassium channel Kir4.1, Inward rectifier K, + channel Kir1.2, Potassium channel, inwardly
- Reactivity:
- Human
- Research Area:
- Signal Transduction
Description
Human Kir4.1 / KCNJ10 ELISA Kit
KCNJ10 (Potassium Inwardly Rectifying Channel Subfamily J Member 10) s a member of the potassium inwardly rectifying channel subfamily J. These channels are sensitive to changes in the intracellular environment, and regulate the flow of potassium ions into and out of cells. KCNJ10 has been implicated in a variety of physiological processes, including cardiac excitability, insulin secretion, and renal potassium excretion. Diseases associated with KCNJ10 include Seizures, Sensorineural Deafness, Ataxia, Mental Retardation, And Electrolyte Imbalance and Deafness, Autosomal Recessive 4, With Enlarged Vestibular Aqueduct.
| Product Name: | Human Kir4.1 / KCNJ10 ELISA Kit |
| Product Code: | HUFI01974 |
| Size: | 96 Assays |
| Alias: | KCNJ10, ATP-dependent inwardly rectifying potassium channel Kir4.1, Inward rectifier K, + channel Kir1.2, Potassium channel, inwardly |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Human KCNJ10 concentrations in serum plasma and other biological fluids. |
| Sensitivity: | 0.094ng/ml |
| Range: | 0.156-10ng/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Human KCNJ10 and the recovery rates were calculated by comparing the measured value to the expected amount of Human KCNJ10 in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human KCNJ10 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| Uniprot | P78508 |
| UniProt Protein Function: | Kir4.1: May be responsible for potassium buffering action of glial cells in the brain. Inward rectifier potassium channels are characterized by a greater tendency to allow potassium to flow into the cell rather than out of it. Their voltage dependence is regulated by the concentration of extracellular potassium; as external potassium is raised, the voltage range of the channel opening shifts to more positive voltages. The inward rectification is mainly due to the blockage of outward current by internal magnesium. Can be blocked by extracellular barium and cesium. Defects in KCNJ10 are the cause of seizures, sensorineural deafness, ataxia, mental retardation, and electrolyte imbalance (SESAMES). A complex disorder characterized by generalized seizures with onset in infancy, delayed psychomotor development, ataxia, sensorineural hearing loss, hypokalemia, metabolic alkalosis, and hypomagnesemia. Belongs to the inward rectifier-type potassium channel (TC 1.A.2.1) family. KCNJ10 subfamily. |
| UniProt Protein Details: | Protein type:Membrane protein, integral; Channel, ligand-gated; Membrane protein, multi-pass; Channel, potassium Chromosomal Location of Human Ortholog: 1q23.2 Cellular Component: microvillus; integral to plasma membrane; basolateral plasma membrane; apical plasma membrane; plasma membrane Molecular Function:identical protein binding; protein binding; ATP-activated inward rectifier potassium channel activity; ATP binding; receptor binding Biological Process: regulation of long-term neuronal synaptic plasticity; myelination in the central nervous system; response to glucocorticoid stimulus; membrane hyperpolarization; response to blue light; glutamate uptake during transmission of nerve impulse; response to mineralocorticoid stimulus; adult walking behavior; protein homotetramerization; synaptic transmission; visual perception; potassium ion import; optic nerve development; regulation of resting membrane potential; regulation of sensory perception of pain; inflammatory response; potassium ion homeostasis; potassium ion transport Disease: Pendred Syndrome; Seizures, Sensorineural Deafness, Ataxia, Mental Retardation, And Electrolyte Imbalance; Deafness, Autosomal Recessive 4, With Enlarged Vestibular Aqueduct |
| NCBI Summary: | This gene encodes a member of the inward rectifier-type potassium channel family, characterized by having a greater tendency to allow potassium to flow into, rather than out of, a cell. The encoded protein may form a heterodimer with another potassium channel protein and may be responsible for the potassium buffering action of glial cells in the brain. Mutations in this gene have been associated with seizure susceptibility of common idiopathic generalized epilepsy syndromes. [provided by RefSeq, Jul 2008] |
| UniProt Code: | P78508 |
| NCBI GenInfo Identifier: | 2493605 |
| NCBI Gene ID: | 3766 |
| NCBI Accession: | P78508.1 |
| UniProt Secondary Accession: | P78508,Q5VUT9, Q8N4I7, Q92808, A3KME7, |
| UniProt Related Accession: | P78508 |
| Molecular Weight: | 42,508 Da |
| NCBI Full Name: | ATP-sensitive inward rectifier potassium channel 10 |
| NCBI Synonym Full Names: | potassium inwardly-rectifying channel, subfamily J, member 10 |
| NCBI Official Symbol: | KCNJ10 |
| NCBI Official Synonym Symbols: | KIR1.2; KIR4.1; SESAME; BIRK-10; KCNJ13-PEN |
| NCBI Protein Information: | ATP-sensitive inward rectifier potassium channel 10; inward rectifier K+ channel KIR1.2; inward rectifier K(+) channel Kir1.2; ATP-dependent inwardly rectifying potassium channel Kir4.1; potassium channel, inwardly rectifying subfamily J member 10; glial ATP-dependent inwardly rectifying potassium channel KIR4.1 |
| UniProt Protein Name: | ATP-sensitive inward rectifier potassium channel 10 |
| UniProt Synonym Protein Names: | ATP-dependent inwardly rectifying potassium channel Kir4.1; Inward rectifier K(+) channel Kir1.2; Potassium channel, inwardly rectifying subfamily J member 10 |
| Protein Family: | ATP-sensitive inward rectifier potassium channel |
| UniProt Gene Name: | KCNJ10 |
| UniProt Entry Name: | KCJ10_HUMAN |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Human ATP-sensitive inward rectifier potassium channel 10 (KCNJ10) ELISA Kit
Mouse ATP-sensitive inward rectifier potassium channel 10 (Kcnj10) ELISA Kit
