Product Name:	Human SYK / Spleen Tyrosine Kinase ELISA Kit
Product Code:	HUFI02885
Size:	96 Assays
Alias:	SYK, EC 2.7.10, EC 2.7.10.2, spleen tyrosine kinaseFLJ37489, tyrosine-protein kinase SYK
Detection method:	Sandwich ELISA, Double Antibody
Application:	This immunoassay kit allows for the in vitro quantitative determination of Human SYK concentrations in serum plasma and other biological fluids.
Sensitivity:	0.375ng/ml
Range:	0.625-40ng/ml
Storage:	4°C for 6 months
Note:	For Research Use Only

Recovery:

Matrices listed below were spiked with certain level of Human SYK and the recovery rates were calculated by comparing the measured value to the expected amount of Human SYK in samples.

Matrix	Recovery range(%)	Average(%)
serum(n=5)	87-101	94
EDTA plasma(n=5)	86-101	95
UFH plasma(n=5)	88-102	95

Linearity:

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human SYK and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample	1:2	1:4	1:8
serum(n=5)	86-105%	91-99%	85-102%
EDTA plasma(n=5)	86-94%	85-100%	82-100%
UFH plasma(n=5)	84-99%	80-99%	81-89%

CV(%):

Intra-Assay: CV<8%
Inter-Assay: CV<10%

Component	Quantity	Storage
ELISA Microplate (Dismountable)	8×12 strips	4°C for 6 months
Lyophilized Standard	2	4°C/-20°C
Sample/Standard Dilution Buffer	20ml	4°C
Biotin-labeled Antibody(Concentrated)	120ul	4°C (Protect from light)
Antibody Dilution Buffer	10ml	4°C
HRP-Streptavidin Conjugate(SABC)	120ul	4°C (Protect from light)
SABC Dilution Buffer	10ml	4°C
TMB Substrate	10ml	4°C (Protect from light)
Stop Solution	10ml	4°C
Wash Buffer(25X)	30ml	4°C
Plate Sealer	5	-

Other materials and equipment required:

Microplate reader with 450 nm wavelength filter
Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
Incubator
Deionized or distilled water
Absorbent paper
Buffer resevoir

Uniprot

P43405

UniProt Protein Function:	Syk: a cytoplasmic tyrosine kinase of the SYK family containing two SH2 domains. Plays a central role in the B cell receptor (BCR) response. An upstream activator of the PI3K, PLCgamma2, and Rac/cdc42 pathways in the BCR response. Required for the sequential events of Fc gamma IIa receptor-mediated phagocytosis. Expression highest in murine spleen, heart, mammary gland and thymus. Two splice variant isoforms have been described.
UniProt Protein Details:	Protein type:EC 2.7.10.2; Protein kinase, tyrosine (non-receptor); Kinase, protein; Protein kinase, TK; TK group; Syk family Chromosomal Location of Human Ortholog: 9q22 Cellular Component: T cell receptor complex; extrinsic to internal side of plasma membrane; protein complex; cytoplasm; plasma membrane; nucleus; cytosol; B cell receptor complex Molecular Function:integrin binding; protein serine/threonine kinase activity; protein binding; protein-tyrosine kinase activity; non-membrane spanning protein tyrosine kinase activity; receptor signaling protein tyrosine kinase activity; protein kinase binding; ATP binding; protein kinase activity Biological Process: viral reproduction; transcription factor import into nucleus; positive regulation of interleukin-3 biosynthetic process; positive regulation of granulocyte macrophage colony-stimulating factor biosynthetic process; positive regulation of calcium-mediated signaling; regulation of phagocytosis; protein amino acid phosphorylation; activation of JNK activity; leukocyte adhesion; B cell receptor signaling pathway; regulation of transcription factor activity; positive regulation of bone resorption; beta selection; positive regulation of gamma-delta T cell differentiation; angiogenesis; inflammatory response; integrin-mediated signaling pathway; platelet activation; neutrophil chemotaxis; adaptive immune response; regulation of superoxide release; positive regulation of cell adhesion mediated by integrin; positive regulation of mast cell degranulation; regulation of neutrophil degranulation; leukotriene biosynthetic process; cell proliferation; positive regulation of peptidyl-tyrosine phosphorylation; organ morphogenesis; neutrophil activation during immune response; serotonin secretion by platelet; leukocyte activation during immune response; defense response to bacterium; macrophage activation during immune response; positive regulation of B cell differentiation; blood vessel morphogenesis; innate immune response; positive regulation of alpha-beta T cell proliferation; lymph vessel development; blood coagulation; transmembrane receptor protein tyrosine kinase signaling pathway; positive regulation of alpha-beta T cell differentiation; positive regulation of cytokine secretion
NCBI Summary:	This gene encodes a member of the family of non-receptor type Tyr protein kinases. This protein is widely expressed in hematopoietic cells and is involved in coupling activated immunoreceptors to downstream signaling events that mediate diverse cellular responses, including proliferation, differentiation, and phagocytosis. It is thought to be a modulator of epithelial cell growth and a potential tumour suppressor in human breast carcinomas. Alternatively spliced transcript variants encoding different isoforms have been found for this gene. [provided by RefSeq, Mar 2010]
UniProt Code:	P43405
NCBI GenInfo Identifier:	1174527
NCBI Gene ID:	6850
NCBI Accession:	P43405.1
UniProt Related Accession:	P43405
Molecular Weight:	635
NCBI Full Name:	Tyrosine-protein kinase SYK
NCBI Synonym Full Names:	spleen tyrosine kinase
NCBI Official Symbol:	SYKÂ Â
NCBI Official Synonym Symbols:	p72-SykÂ Â
NCBI Protein Information:	tyrosine-protein kinase SYK
UniProt Protein Name:	Tyrosine-protein kinase SYK
UniProt Synonym Protein Names:	Spleen tyrosine kinase; p72-Syk
Protein Family:	Tyrosine-protein kinase
UniProt Gene Name:	SYKÂ Â
UniProt Entry Name:	KSYK_HUMAN

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.

Step	Protocol
1.	Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.	Aliquot 0.1ml standard solutions into the standard wells.
3.	Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.	Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.	Seal the plate with a cover and incubate at 37 °C for 90 min.
6.	Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.	Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.	Seal the plate with a cover and incubate at 37°C for 60 min.
9.	Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.	Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.	Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.	Add 90 Âµl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.	Add 50 Âµl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14.	Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type	Protocol
Serum	If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.
Plasma	Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid	Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatant	Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysates	Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenates	The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysates	Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk	Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Inflammasome Activation Pathways: A Comprehensive Overview

Illuminating the Multifaceted Role of Acetylation: Bridging Chemistry and Biology Introduction:

Understanding IgA Test: Importance, Procedure, and Interpretation

Human SYK / Spleen Tyrosine Kinase ELISA Kit

Description