Human TREX1 (Three-prime repair exonuclease 1) ELISA Kit (HUFI05962)
- SKU:
- HUFI05962
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- Q9NSU2
- Sensitivity:
- 46.875pg/ml
- Range:
- 78.125-5000pg/ml
- ELISA Type:
- Sandwich
- Synonyms:
- 3 5 exonuclease TREX1, AGS1, AGS5, CRV, DNase III, DRN3, HERNS, TREX1
- Reactivity:
- Human
Description
Human TREX1 (Three-prime repair exonuclease 1) ELISA
TREX1 (Three-prime repair exonuclease 1) encodes a nuclear protein with 3' exonuclease activity. TREX1 (Three-prime repair exonuclease 1) may play a role in DNA repair and serve as a proofreading function for DNA polymerase. Mutations in TREX1 (Three-prime repair exonuclease 1) result in Aicardi-Goutieres syndrome, lupus, and encephalitis. The Assay Genie Human TREX1 (Three-prime repair exonuclease 1) ELISA is a highly sensitive assay for the quantitative measurement of TREX1 (Three-prime repair exonuclease 1) in serum, blood, plasma, cell culture supernatant and tissue samples.
| Product Name: | Human TREX1 (Three-prime repair exonuclease 1) ELISA Kit |
| Product Code: | HUFI05962 |
| Size: | 96 Assays |
| Alias: | 3 5 exonuclease TREX1 ELISA Kit, AGS1 ELISA Kit, AGS5 ELISA Kit, CRV ELISA Kit, DNase III ELISA Kit, DRN3 ELISA Kit, HERNS ELISA Kit, TREX1 ELISA Kit |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Human TREX1 (Three-prime repair exonuclease 1) concentrations in serum plasma and other biological fluids. |
| Sensitivity: | < 46.875pg/ml |
| Range: | 78.125-5000pg/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Human TREX1 (Three-prime repair exonuclease 1) and the recovery rates were calculated by comparing the measured value to the expected amount of Human TREX1 (Three-prime repair exonuclease 1) in samples. Enquire for more information. |
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human TREX1 (Three-prime repair exonuclease 1) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. Enquire for more information. |
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| UniProt Protein Function: | TREX1: the major 3' DNA exonuclease in mammalian cells. Normally associates with the endoplasmic reticulum (ER). Translocates to the nucleus at S phase after DNA damage by gamma-irradiation or hydroxyurea. Trex1-deficient cells show defective G1/S transition, with single-stranded DNA molecules persisting after S phase and accumulating in the ER. Degrades ssDNA. Prevents chronic checkpoint activation and inappropriate immune activation. Mutations cause Aicardi-Goutieres syndrome, an autoimmune disorder. Trex1a(-/-) mice have autoinflammatory responses. The gene for this protein is either identical to or adjacent to that of ATRIP. Some of the mRNAs that encode TREX1 also encode ATRIP in another reading frame. Three alternatively spliced human isoforms have been reported. |
| UniProt Protein Details: | Protein type:Cell cycle regulation; DNA repair, damage; Deoxyribonuclease; EC 3.1.11.2; DNA-binding Chromosomal Location of Human Ortholog: 3p21.31 Cellular Component: endoplasmic reticulum membrane; nucleolus; nuclear envelope; nucleus; cytosol Molecular Function:protein homodimerization activity; metal ion binding; double-stranded DNA binding; 3'-5'-exodeoxyribonuclease activity; exodeoxyribonuclease III activity; MutLalpha complex binding; adenyl deoxyribonucleotide binding; 3'-5' exonuclease activity; MutSalpha complex binding; single-stranded DNA binding Biological Process: regulation of interferon type I production; mismatch repair; positive regulation of interferon type I production; innate immune response; DNA replication; DNA repair; DNA catabolic process, exonucleolytic; DNA metabolic process; DNA recombination Disease: Chilblain Lupus 1; Vasculopathy, Retinal, With Cerebral Leukodystrophy; Aicardi-goutieres Syndrome 1; Systemic Lupus Erythematosus |
| NCBI Summary: | This gene encodes a nuclear protein with 3' exonuclease activity. The encoded protein may play a role in DNA repair and serve as a proofreading function for DNA polymerase. Mutations in this gene result in Aicardi-Goutieres syndrome, chilblain lupus, Cree encephalitis, and other diseases of the immune system. Alternative splicing results in multiple transcript variants. [provided by RefSeq, Sep 2012] |
| UniProt Code: | Q9NSU2 |
| NCBI GenInfo Identifier: | 47606216 |
| NCBI Gene ID: | 11277 |
| NCBI Accession: | Q9NSU2.1 |
| UniProt Secondary Accession: | Q9NSU2,Q8TEU2, Q9BPW1, Q9Y4X2, B2RCN9, |
| UniProt Related Accession: | Q9NSU2 |
| Molecular Weight: | 369 |
| NCBI Full Name: | Three-prime repair exonuclease 1 |
| NCBI Synonym Full Names: | three prime repair exonuclease 1 |
| NCBI Official Symbol: | TREX1 |
| NCBI Official Synonym Symbols: | CRV; AGS1; DRN3; HERNS |
| NCBI Protein Information: | three-prime repair exonuclease 1; DNase III; deoxyribonuclease III; 3' repair exonuclease 1; 3'-5' exonuclease TREX1 |
| UniProt Protein Name: | Three-prime repair exonuclease 1 |
| UniProt Synonym Protein Names: | 3'-5' exonuclease TREX1; DNase III |
| Protein Family: | Three-prime repair exonuclease |
| UniProt Gene Name: | TREX1 |
| UniProt Entry Name: | TREX1_HUMAN |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37 °C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37 °C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37 °C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37 °C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
Human DNA excision repair protein ERCC-1 (ERCC1) ELISA Kit
