Mouse CCAAT/enhancer-binding protein beta (Cebpb) ELISA Kit
The Mouse CCAAT Enhancer Binding Protein Beta (CEBPB) ELISA Kit is specifically designed for the accurate and sensitive detection of C/EBP Beta levels in mouse serum, plasma, and cell culture supernatants. This kit offers high performance and precision, guaranteeing reliable and consistent results for a variety of experimental needs.C/EBP Beta is a key transcription factor that plays a critical role in regulating gene expression, cell differentiation, and immune responses. It is involved in various physiological processes, including adipogenesis, liver regeneration, and inflammation.
Dysregulation of C/EBP Beta has been implicated in diseases such as obesity, diabetes, and cancer, highlighting its importance as a potential biomarker for disease diagnosis and treatment development.With its superior quality and sensitivity, the Mouse CCAAT Enhancer Binding Protein Beta (CEBPB) ELISA Kit is an invaluable tool for researchers studying the role of C/EBP Beta in various biological pathways and disease mechanisms. Order yours today to advance your research with confidence and accuracy.
Product Name:
Mouse CCAAT/enhancer-binding protein beta (Cebpb) ELISA Kit
Isoform 3: Acts as a dominant negative through heterodimerization with isoform 2 (By similarity). Promotes osteoblast differentiation and osteoclastogenesis (PubMed:19440205).
Uniprot:
P28033
Sample Type:
Serum, plasma, tissue homogenates, cell culture supernates and other biological fluids
Specificity:
Natural and recombinant mouse CCAAT/enhancer-binding protein beta
Sub Unit:
Binds DNA as a homodimer and as a heterodimer. Interacts with ATF4. Binds DNA as a heterodimer with ATF4 (PubMed:11018027). Interacts with MYB; within the complex, MYB and CEBPB bind to different promoter regions (PubMed:11792321). Can form stable heterodimers with CEBPA, CEBPD and CEBPE (By similarity). Isoform 2 and isoform 3 also form heterodimers (By similarity). Interacts with TRIM28 and PTGES2 (PubMed:9742105, PubMed:15879117). Interacts with PRDM16 (PubMed:19641492). Interacts with CCDC85B (PubMed:15644333). Forms a complex with THOC5 (PubMed:19015024). Interacts with ZNF638; this interaction increases transcriptional activation (PubMed:21602272). Interacts with CIDEA and CIDEC (PubMed:22245780). Interaction with CIDEA increases transcriptional activation of a subset of CEBPB downstream target genes, including ID2, IGF1, PRLR, SOCS1, SOCS3, XDH. Interaction with CIDEC increases transcriptional activation of SOCS1, SOCS3, TGFB1, TGFBR1, ID2 and XDH. Interacts with DDIT3/CHOP. Interacts with EP300; recruits EP300 to chromatin. Interacts with RORA; the interaction disrupts interaction with EP300 (PubMed:19324970). Interacts (not methylated) with MED23, MED26, SMARCA2, SMARCB1 and SMARCC1 (PubMed:20111005). Interacts with KAT2A and KAT2B (PubMed:17301242). Interacts with ATF5; EP300 is required for ATF5 and CEBPB interaction and DNA binding (PubMed:24216764).
Research Area:
Cancer
Subcellular Location:
Nucleus Cytoplasm In T-cells when sumoylated drawn to pericentric heterochromatin thereby allowing proliferation (PubMed:16585579). Translocates to the nucleus when phosphorylated at Ser-288 (By similarity).
Storage:
Please see kit components below for exact storage details
CCAAT/enhancer-binding protein beta; AGP/EBP; C/EBP BETA; nuclear protein Il6; interleukin-6-dependent-binding protein; liver-enriched transcriptional activator
UniProt Protein Name:
CCAAT/enhancer-binding protein beta
UniProt Synonym Protein Names:
AGP/EBP; Interleukin-6-dependent-binding protein; IL-6DBP; Liver-enriched transcriptional activator; LAP
Protein Family:
CCAAT/enhancer-binding protein
UniProt Gene Name:
Cebpb
UniProt Entry Name:
CEBPB_MOUSE
Component
Quantity (96 Assays)
Storage
ELISA Microplate (Dismountable)
8×12 strips
-20°C
Lyophilized Standard
2
-20°C
Sample Diluent
20ml
-20°C
Assay Diluent A
10mL
-20°C
Assay Diluent B
10mL
-20°C
Detection Reagent A
120µL
-20°C
Detection Reagent B
120µL
-20°C
Wash Buffer
30mL
4°C
Substrate
10mL
4°C
Stop Solution
10mL
4°C
Plate Sealer
5
-
Other materials and equipment required:
Microplate reader with 450 nm wavelength filter
Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
Incubator
Deionized or distilled water
Absorbent paper
Buffer resevoir
*Note: The below protocol is a sample protocol. Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Allow all reagents to reach room temperature (Please do not dissolve the reagents at 37°C directly). All the reagents should be mixed thoroughly by gently swirling before pipetting. Avoid foaming. Keep appropriate numbers of strips for 1 experiment and remove extra strips from microtiter plate. Removed strips should be resealed and stored at -20°C until the kits expiry date. Prepare all reagents, working standards and samples as directed in the previous sections. Please predict the concentration before assaying. If values for these are not within the range of the standard curve, users must determine the optimal sample dilutions for their experiments. We recommend running all samples in duplicate.
Step
1.
Add Sample: Add 100µL of Standard, Blank, or Sample per well. The blank well is added with Sample diluent. Solutions are added to the bottom of micro ELISA plate well, avoid inside wall touching and foaming as possible. Mix it gently. Cover the plate with sealer we provided. Incubate for 120 minutes at 37°C.
2.
Remove the liquid from each well, don't wash. Add 100µL of Detection Reagent A working solution to each well. Cover with the Plate sealer. Gently tap the plate to ensure thorough mixing. Incubate for 1 hour at 37°C. Note: if Detection Reagent A appears cloudy warm to room temperature until solution is uniform.
3.
Aspirate each well and wash, repeating the process three times. Wash by filling each well with Wash Buffer (approximately 400µL) (a squirt bottle, multi-channel pipette,manifold dispenser or automated washer are needed). Complete removal of liquid at each step is essential. After the last wash, completely remove remaining Wash Buffer by aspirating or decanting. Invert the plate and pat it against thick clean absorbent paper.
4.
Add 100µL of Detection Reagent B working solution to each well. Cover with the Plate sealer. Incubate for 60 minutes at 37°C.
5.
Repeat the wash process for five times as conducted in step 3.
6.
Add 90µL of Substrate Solution to each well. Cover with a new Plate sealer and incubate for 10-20 minutes at 37°C. Protect the plate from light. The reaction time can be shortened or extended according to the actual color change, but this should not exceed more than 30 minutes. When apparent gradient appears in standard wells, user should terminatethe reaction.
7.
Add 50µL of Stop Solution to each well. If color change does not appear uniform, gently tap the plate to ensure thorough mixing.
8.
Determine the optical density (OD value) of each well at once, using a micro-plate reader set to 450 nm. User should open the micro-plate reader in advance, preheat the instrument, and set the testing parameters.
9.
After experiment, store all reagents according to the specified storage temperature respectively until their expiry.
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
Sample Type
Protocol
Serum
If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.
Plasma
Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid
Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatant
Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysates
Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenates
The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysates
Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk
Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.
