Mouse TGF-beta-activated kinase 1 and MAP3K7-binding protein 3 (Tab3) ELISA Kit
The Mouse TGF-Beta Activated Kinase 1 and MAP3K7 Binding Protein 3 (TAB3) ELISA Kit is specifically designed for the accurate detection of TAB3 levels in mouse serum, plasma, and cell culture supernatants. This kit offers high sensitivity and specificity, ensuring reliable and reproducible results for a variety of research applications.TAB3 is a crucial protein that is involved in several signaling pathways, including the TGF-Beta activated kinase 1 and MAP3K7 binding pathway. It plays a significant role in mediating inflammatory responses, regulating cell survival, and influencing immune cell activation.
Understanding the levels of TAB3 can provide valuable insights into various diseases, including cancer, inflammatory disorders, and autoimmune conditions, making it a valuable tool for researchers studying these conditions and developing potential therapeutic interventions.Overall, the Mouse TAB3 ELISA Kit offers a reliable and efficient method for quantifying TAB3 levels in mouse samples, making it an essential tool for advancing research in the field of immunology and inflammation.
Product Name:
Mouse TGF-beta-activated kinase 1 and MAP3K7-binding protein 3 (Tab3) ELISA Kit
SKU:
MOEB2131
Size:
96T
Target:
Mouse TGF-beta-activated kinase 1 and MAP3K7-binding protein 3 (Tab3)
Synonyms:
Mitogen-activated protein kinase kinase kinase 7-interacting protein 3, TAK1-binding protein 3, TGF-beta-activated kinase 1-binding protein 3, TAB-3, Kiaa4135, Map3k7ip3
Assay Type:
Sandwich
Detection Method:
ELISA
Reactivity:
Mouse
Detection Range:
78-5000pg/mL
Sensitivity:
39.4pg/mL
Intra CV:
Provided with the Kit
Inter CV:
Provided with the Kit
Linearity:
Provided with the Kit
Recovery:
Provided with the Kit
Function:
Adapter linking MAP3K7/TAK1 and TRAF6 or TRAF2. Mediator of MAP3K7 activation, respectively in the IL-1 and TNF signaling pathways. Plays a role in activation of NF-kappa-B and AP1 transcription factor.
Uniprot:
Q571K4
Sample Type:
Serum, plasma, tissue homogenates, cell culture supernates and other biological fluids
Specificity:
Natural and recombinant mouse TGF-beta-activated kinase 1 and MAP3K7-binding protein 3
Sub Unit:
Interacts with TAB1, TAB2, MAP3K7, TRAF2 and TRAF6. The minimal TAB3-containing complex (TAB1-MAP3K7-TAB3) appears not to contain TAB2. However, it seems sensible to consider that TAB2 may also join this complex and may act in a cooperative manner with TAB3. Interacts with WDR34 (via the WD domains). Binds 'Lys-63'-linked polyubiquitin chains. Interacts with RBCK1 (By similarity). Interacts with TRIM5.
Storage:
Please see kit components below for exact storage details
Note:
For research use only
UniProt Protein Function:
TAB3: Adapter linking MAP3K7/TAK1 and TRAF6 or TRAF2. Mediator of MAP3K7 activation, respectively in the IL1 and TNF signaling pathways. Plays a role in activation of NF-kappa-B and AP1 transcription factor. Isoform 2 may be an oncogenic factor. 2 isoforms of the human protein are produced by alternative splicing.Protein type: Adaptor/scaffoldCellular Component: cytoplasm; nucleoplasmMolecular Function: metal ion binding; zinc ion binding
TGF-beta-activated kinase 1 and MAP3K7-binding protein 3
NCBI Synonym Full Names:
TGF-beta activated kinase 1/MAP3K7 binding protein 3
NCBI Official Symbol:
Tab3
NCBI Official Synonym Symbols:
Map3k7ip3; mKIAA4135; 4921526G09Rik
NCBI Protein Information:
TGF-beta-activated kinase 1 and MAP3K7-binding protein 3
UniProt Protein Name:
TGF-beta-activated kinase 1 and MAP3K7-binding protein 3
UniProt Synonym Protein Names:
Mitogen-activated protein kinase kinase kinase 7-interacting protein 3; TAK1-binding protein 3; TAB-3; TGF-beta-activated kinase 1-binding protein 3
Protein Family:
TGF-beta-activated kinase 1 and MAP3K7-binding protein
UniProt Gene Name:
Tab3
UniProt Entry Name:
TAB3_MOUSE
Component
Quantity (96 Assays)
Storage
ELISA Microplate (Dismountable)
8×12 strips
-20°C
Lyophilized Standard
2
-20°C
Sample Diluent
20ml
-20°C
Assay Diluent A
10mL
-20°C
Assay Diluent B
10mL
-20°C
Detection Reagent A
120µL
-20°C
Detection Reagent B
120µL
-20°C
Wash Buffer
30mL
4°C
Substrate
10mL
4°C
Stop Solution
10mL
4°C
Plate Sealer
5
-
Other materials and equipment required:
Microplate reader with 450 nm wavelength filter
Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
Incubator
Deionized or distilled water
Absorbent paper
Buffer resevoir
*Note: The below protocol is a sample protocol. Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Allow all reagents to reach room temperature (Please do not dissolve the reagents at 37°C directly). All the reagents should be mixed thoroughly by gently swirling before pipetting. Avoid foaming. Keep appropriate numbers of strips for 1 experiment and remove extra strips from microtiter plate. Removed strips should be resealed and stored at -20°C until the kits expiry date. Prepare all reagents, working standards and samples as directed in the previous sections. Please predict the concentration before assaying. If values for these are not within the range of the standard curve, users must determine the optimal sample dilutions for their experiments. We recommend running all samples in duplicate.
Step
1.
Add Sample: Add 100µL of Standard, Blank, or Sample per well. The blank well is added with Sample diluent. Solutions are added to the bottom of micro ELISA plate well, avoid inside wall touching and foaming as possible. Mix it gently. Cover the plate with sealer we provided. Incubate for 120 minutes at 37°C.
2.
Remove the liquid from each well, don't wash. Add 100µL of Detection Reagent A working solution to each well. Cover with the Plate sealer. Gently tap the plate to ensure thorough mixing. Incubate for 1 hour at 37°C. Note: if Detection Reagent A appears cloudy warm to room temperature until solution is uniform.
3.
Aspirate each well and wash, repeating the process three times. Wash by filling each well with Wash Buffer (approximately 400µL) (a squirt bottle, multi-channel pipette,manifold dispenser or automated washer are needed). Complete removal of liquid at each step is essential. After the last wash, completely remove remaining Wash Buffer by aspirating or decanting. Invert the plate and pat it against thick clean absorbent paper.
4.
Add 100µL of Detection Reagent B working solution to each well. Cover with the Plate sealer. Incubate for 60 minutes at 37°C.
5.
Repeat the wash process for five times as conducted in step 3.
6.
Add 90µL of Substrate Solution to each well. Cover with a new Plate sealer and incubate for 10-20 minutes at 37°C. Protect the plate from light. The reaction time can be shortened or extended according to the actual color change, but this should not exceed more than 30 minutes. When apparent gradient appears in standard wells, user should terminatethe reaction.
7.
Add 50µL of Stop Solution to each well. If color change does not appear uniform, gently tap the plate to ensure thorough mixing.
8.
Determine the optical density (OD value) of each well at once, using a micro-plate reader set to 450 nm. User should open the micro-plate reader in advance, preheat the instrument, and set the testing parameters.
9.
After experiment, store all reagents according to the specified storage temperature respectively until their expiry.
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
Sample Type
Protocol
Serum
If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.
Plasma
Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid
Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatant
Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysates
Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenates
The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysates
Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk
Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.
