Rat Cytochrome P450 1A1/CYP1A1 ELISA Kit- High Sensitivity

Product Name:	Rat Cyp1a1 (Cytochrome P450 1A1) ELISA Kit
Product Code:	RTFI00277
Size:	96 Assays
Target:	Rat Cyp1a1
Alias:	Cyp1a1, CYP1A1, Cytochrome P450, family 1, subfamily A, polypeptide 1, Cytochrome P450MT2, CYPIA1, Cytochrome P450-C
Reactivity:	Rat
Detection Method:	Sandwich ELISA, Double Antibody
Sensitivity:	0.094ng/ml
Range:	0.156-10ng/ml
Storage:	4°C for 6 months
Note:	For Research Use Only

Recovery:

Matrices listed below were spiked with certain level of Rat Cyp1a1 and the recovery rates were calculated by comparing the measured value to the expected amount of Rat Cyp1a1 in samples.

Matrix	Recovery range(%)	Average(%)
serum(n=5)	88-103	92
EDTA plasma(n=5)	88-98	92
UFH plasma(n=5)	87-105	94

Linearity:

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Rat Cyp1a1 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample	1:2	1:4	1:8
serum(n=5)	85-103%	85-103%	87-103%
EDTA plasma(n=5)	83-93%	83-99%	82-96%
UFH plasma(n=5)	81-91%	82-95%	82-93%

Intra-Assay:

CV <8%

Inter-Assay:

CV <10%

Uniprot:

P00185

UniProt Protein Function:	CYP1A1: Cytochromes P450 are a group of heme-thiolate monooxygenases. In liver microsomes, this enzyme is involved in an NADPH-dependent electron transport pathway. It oxidizes a variety of structurally unrelated compounds, including steroids, fatty acids, and xenobiotics
UniProt Protein Details:	Protein type:Oxidoreductase; Xenobiotic Metabolism - metabolism by cytochrome P450; Amino Acid Metabolism - tryptophan; EC 1.14.14.1; Cofactor and Vitamin Metabolism - retinol Cellular Component: cytoplasm; endoplasmic reticulum membrane; intracellular membrane-bound organelle; mitochondrial membrane; mitochondrion Molecular Function:catalytic activity; demethylase activity; enzyme binding; flavonoid 3'-monooxygenase activity; heme binding; iron ion binding; monooxygenase activity; oxidoreductase activity; oxidoreductase activity, acting on diphenols and related substances as donors; oxidoreductase activity, acting on paired donors, with incorporation or reduction of molecular oxygen, reduced flavin or flavoprotein as one donor, and incorporation of one atom of oxygen; protein binding; steroid hydroxylase activity Biological Process: 9-cis-retinoic acid biosynthetic process; aging; amine metabolic process; camera-type eye development; cell proliferation; coumarin metabolic process; developmental process; dibenzo-p-dioxin catabolic process; dibenzo-p-dioxin metabolic process; drug metabolic process; embryonic development ending in birth or egg hatching; flavonoid metabolic process; gut development; heterocycle metabolic process; hydrogen peroxide biosynthetic process; insecticide metabolic process; liver development; maternal process involved in parturition; porphyrin metabolic process; response to antibiotic; response to arsenic; response to drug; response to food; response to herbicide; response to hyperoxia; response to hypoxia; response to iron(III) ion; response to lipopolysaccharide; response to nematode; response to organic cyclic substance; response to organic substance; response to toxin; response to virus; response to vitamin A; response to wounding; toxin metabolic process
NCBI Summary:	monooxygenase that plays a role in dioxin metabolism and detoxification which is 3-methylcholanthrene-inducible [RGD, Feb 2006]
UniProt Code:	P00185
NCBI GenInfo Identifier:	46048641
NCBI Gene ID:	24296
NCBI Accession:	NP_036672.2
UniProt Related Accession:	P00185
Molecular Weight:	59,393 Da
NCBI Full Name:	cytochrome P450 1A1
NCBI Synonym Full Names:	cytochrome P450, family 1, subfamily a, polypeptide 1
NCBI Official Symbol:	Cyp1a1
NCBI Official Synonym Symbols:	AHH; AHRR; CP11; CYP1; Cyp45c; P1-450; P450-C; P450DX; Cypc45c; P-450MC
NCBI Protein Information:	cytochrome P450 1A1
UniProt Protein Name:	Cytochrome P450 1A1
UniProt Synonym Protein Names:	CYPIA1; Cytochrome P450-C; Cytochrome P450MT2
Protein Family:	Cytochrome
UniProt Gene Name:	Cyp1a1
UniProt Entry Name:	CP1A1_RAT

Step	Procedure
1.	Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.	Aliquot 0.1ml standard solutions into the standard wells.
3.	Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.	Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.	Seal the plate with a cover and incubate at 37°C for 90 min.
6.	Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.	Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.	Seal the plate with a cover and incubate at 37°C for 60 min.
9.	Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.	Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.	Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.	Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.	Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14.	Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type	Protocol
Serum:	If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clotovernight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Removeserum and assay promptly or aliquot and store the samples at-80°C. Avoid multiple freeze-thaw cycles.
Plasma:	Collect plasma using EDTA or heparin as an anti-coagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid:	Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell Culture Supernatant:	Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell Lysates:	Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.
Tissue Homogenates:	The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenizein 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or-80°C.
Tissue Lysates:	Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk:	Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.