Product Name:	Rat Gelsolin (Gsn) ELISA Kit
SKU:	RTEB0244
Size:	96T
Target:	Rat Gelsolin (Gsn)
Synonyms:	Actin-depolymerizing factor, Brevin, ADF
Assay Type:	Sandwich
Detection Method:	ELISA
Reactivity:	Rat
Detection Range:	6.25-400ng/mL
Sensitivity:	3.125ng/mL

Intra CV:

6.2%

Inter CV:

9.4%

Linearity:

Sample	1:2	1:4	1:8	1:16
Serum(N=5)	106-116%	98-106%	106-116%	106-116%
EDTA Plasma(N=5)	80-92%	108-119%	85-97%	106-116%
Heparin Plasma(N=5)	101-111%	99-109%	95-106%	101-111%

Recovery:

Sample Type	Average(%)	Recovery Range(%)
Serum	106	100-112
Plasma	108	102-114

Function:

Calcium-regulated, actin-modulating protein that binds to the plus (or barbed) ends of actin monomers or filaments, preventing monomer exchange (end-blocking or capping). It can promote the assembly of monomers into filaments (nucleation) as well as sever filaments already formed. Plays a role in ciliogenesis.

Uniprot:	Q68FP1
Sample Type:	Serum, plasma, tissue homogenates, cell culture supernates and other biological fluids
Specificity:	Natural and recombinant rat Gelsolin
Sub Unit:	Binds to actin and to fibronectin. Identified in a complex composed of ACTA1, COBL, GSN AND TMSB4X (By similarity). Interacts with the inactive form of EIF2AK2/PKR.
Research Area:	Metabolism
Subcellular Location:	Isoform 2 Cytoplasm Cytoskeleton A cytoplasmic form may also exist.
Storage:	Please see kit components below for exact storage details
Note:	For research use only

UniProt Protein Function:	Gelsolin: a calcium-regulated, actin-modulating protein that binds to the plus (or barbed) ends of actin monomers or filaments, preventing monomer exchange (end-blocking or capping). It can promote the assembly of monomers into filaments (nucleation) as well as sever filaments already formed. Its expression is significantly decreased in many tumors and transformed cell lines. Gelsolin and other proteins including E-cadherin, BRCA, p21WAF, HoxA5, and retinoic acid receptor II are regulated by epigenetic changes in breast cancers. Gelsolin helps mediate the ability of HDAC inhibitors to protect neurons from oxygen/glucose deprivation. Two human isoforms are produced by alternative initiation.
UniProt Protein Details:	Protein type:Motility/polarity/chemotaxis; Secreted; Actin-binding; Secreted, signal peptide; Nuclear receptor co-regulator Cellular Component: actin cap; actin cytoskeleton; cortical actin cytoskeleton; cytoplasm; cytosol; extracellular region; extracellular space; focal adhesion; lamellipodium; myelin sheath; nucleus; perinuclear region of cytoplasm; plasma membrane; podosome; protein complex; ruffle; sarcoplasm Molecular Function:actin binding; calcium ion binding; myosin II binding; protein domain specific binding Biological Process: actin filament capping; actin filament polymerization; actin filament severing; actin nucleation; actin polymerization and/or depolymerization; aging; apoptosis; barbed-end actin filament capping; extracellular matrix disassembly; negative regulation of virion penetration into host cell; oligodendrocyte development; phagocytosis, engulfment; phosphoinositide-mediated signaling; positive regulation of actin nucleation; protein destabilization; regulation of cell adhesion; response to ethanol; response to folic acid; sequestering of actin monomers; striated muscle atrophy; tissue regeneration; vesicle-mediated transport; wound healing
NCBI Summary:	plays a role in phosphoinositide mediated disassembly of actin filaments in Sertoli cell adhesion complexes; may regulate sperm release and turnover of the blood-testis barrier [RGD, Feb 2006]
UniProt Code:	Q68FP1
NCBI GenInfo Identifier:	51854227
NCBI Gene ID:	296654
NCBI Accession:	NP_001004080.1
UniProt Related Accession:	Q68FP1
Molecular Weight:	80,929 Da
NCBI Full Name:	gelsolin
NCBI Synonym Full Names:	gelsolin
NCBI Official Symbol:	Gsn
NCBI Protein Information:	gelsolin
UniProt Protein Name:	Gelsolin
UniProt Synonym Protein Names:	Actin-depolymerizing factor; ADF; Brevin
Protein Family:	Gelsolin
UniProt Gene Name:	Gsn
UniProt Entry Name:	GELS_RAT

Component	Quantity (96 Assays)	Storage
ELISA Microplate (Dismountable)	8×12 strips	-20°C
Lyophilized Standard	2	-20°C
Sample Diluent	20ml	-20°C
Assay Diluent A	10mL	-20°C
Assay Diluent B	10mL	-20°C
Detection Reagent A	120µL	-20°C
Detection Reagent B	120µL	-20°C
Wash Buffer	30mL	4°C
Substrate	10mL	4°C
Stop Solution	10mL	4°C
Plate Sealer	5	-

Other materials and equipment required:

Microplate reader with 450 nm wavelength filter
Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
Incubator
Deionized or distilled water
Absorbent paper
Buffer resevoir

*Note: The below protocol is a sample protocol. Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Allow all reagents to reach room temperature (Please do not dissolve the reagents at 37°C directly). All the reagents should be mixed thoroughly by gently swirling before pipetting. Avoid foaming. Keep appropriate numbers of strips for 1 experiment and remove extra strips from microtiter plate. Removed strips should be resealed and stored at -20°C until the kits expiry date. Prepare all reagents, working standards and samples as directed in the previous sections. Please predict the concentration before assaying. If values for these are not within the range of the standard curve, users must determine the optimal sample dilutions for their experiments. We recommend running all samples in duplicate.

Step
1.	Add Sample: Add 100µL of Standard, Blank, or Sample per well. The blank well is added with Sample diluent. Solutions are added to the bottom of micro ELISA plate well, avoid inside wall touching and foaming as possible. Mix it gently. Cover the plate with sealer we provided. Incubate for 120 minutes at 37°C.
2.	Remove the liquid from each well, don't wash. Add 100µL of Detection Reagent A working solution to each well. Cover with the Plate sealer. Gently tap the plate to ensure thorough mixing. Incubate for 1 hour at 37°C. Note: if Detection Reagent A appears cloudy warm to room temperature until solution is uniform.
3.	Aspirate each well and wash, repeating the process three times. Wash by filling each well with Wash Buffer (approximately 400µL) (a squirt bottle, multi-channel pipette,manifold dispenser or automated washer are needed). Complete removal of liquid at each step is essential. After the last wash, completely remove remaining Wash Buffer by aspirating or decanting. Invert the plate and pat it against thick clean absorbent paper.
4.	Add 100µL of Detection Reagent B working solution to each well. Cover with the Plate sealer. Incubate for 60 minutes at 37°C.
5.	Repeat the wash process for five times as conducted in step 3.
6.	Add 90µL of Substrate Solution to each well. Cover with a new Plate sealer and incubate for 10-20 minutes at 37°C. Protect the plate from light. The reaction time can be shortened or extended according to the actual color change, but this should not exceed more than 30 minutes. When apparent gradient appears in standard wells, user should terminatethe reaction.
7.	Add 50µL of Stop Solution to each well. If color change does not appear uniform, gently tap the plate to ensure thorough mixing.
8.	Determine the optical density (OD value) of each well at once, using a micro-plate reader set to 450 nm. User should open the micro-plate reader in advance, preheat the instrument, and set the testing parameters.
9.	After experiment, store all reagents according to the specified storage temperature respectively until their expiry.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type	Protocol
Serum	If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.
Plasma	Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid	Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatant	Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysates	Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenates	The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysates	Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk	Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.