null

SARS-COV-2 Spike RBD Protein Antibody ELISA Kit

SKU:
CBK4144
€649
Frequently bought together:

Description

Technical Manual

 SARS-COV-2 Spike RBD Protein Antibody ELISA Kit

The ELISA (Enzyme-Linked Immunosorbent Assay) kit is an in vitro enzyme-linked immunosorbent assay for the quantitative measurement of samples in cell culture supernatant, serum, plasma (EDTA, citrate, heparin).

This SARS-COV-2 Spike RBD Protein Antibody ELISA kit is intended for laboratory research use only and not for use in diagnostic or therapeutic procedures. The stop solution changes color from blue to yellow and the intensity of the color is measured at 450 nm using a spectrophotometer. In order to measure the concentration of SARS-COV-2 Spike RBD Protein Antibody in the sample, this SARS-COV-2 Spike RBD Protein Antibody ELISA Kit includes a set of calibration standards. The calibration standards are assayed at the same time as the samples and allow the operator to produce a standard curve of optical density versus SARS-COV-2 Spike RBD Protein Antibody concentration. The concentration of the samples is then determined by comparing the O.D. of the samples to the standard curve.

Information Description

Product Name

SARS-COV-2 Spike RBD Protein Antibody ELISA Kit

SKU Number

CBK4144

Size

96T

Sample

100 uL

Kit Components

  • Recombinant 2019-nCoV Spike RBD Protein Coated Plate
  • Control Antibody (1000×)
  • Concentrated Biotin Recombinant 2019-nCoV Spike RBD
  • Protein (250×)
  • Streptavidin-HRP Concentrated (100x))
  • Control/Sample Diluent (R1)
  • Biotin-Conjugate Protein Diluent (R2)
  • Streptavidin-HRP Diluent(R3)
  • Wash Buffer(20x)
  • TMB Substrate
  • Stop Solution
  • Plate Sealers
  • Specification

Instruments

Microplate Reader

Detection

Colorimetric

Assay Time

4 hours

Conjugate

Biotin

Precautions

Sandwich ELISA

Sensitivity

121.4 pg/mL

Standard Curve Range

391-25000 pg/mL

Storage Conditions

Store at 4°C

Safety Notes

1. This kit contains materials with small quantities of sodium azide. Sodium azide reacts with lead and copper plumbing to form explosive metal azides. Upon disposal, flush drains with a large volume of water to prevent azide accumulation. Avoid ingestion and contact with eyes, skin or mucous membranes. In the case of contact, rinse the affected area with plenty of water. Observe all federal, state and local regulations for disposal.
2. All blood components and biological materials should be handled as potentially hazardous. Follow universal precautions as established by the Centers for Disease Control and Prevention and by the Occupational Safety and Health Administration when handling and disposing of infectious agents.