Description
Annexin V-Cyanine5/PI Apoptosis Kit
The Annexin V-Cyanine5/PI Apoptosis Kit (AKES041) is a research kit for detecting apoptosis in suspension and adherent cells. Annexin V-Cyanine5 binds phosphatidylserine (PS) on the outer leaflet of apoptotic cell membranes in a calcium-dependent manner, and propidium iodide (PI) identifies cells with lost membrane integrity. Together they allow researchers to distinguish live, early apoptotic, and late apoptotic or necrotic cells by flow cytometry or fluorescence microscopy.
Annexin V is a member of the annexin family that binds phosphatidylserine (PS) in a calcium-dependent manner. In healthy cells PS is restricted to the inner leaflet of the plasma membrane; during apoptosis it is exposed on the outer leaflet, where Annexin V can bind it.
Loss of membrane integrity occurs in late apoptotic and necrotic cells. Nuclear dyes such as PI, DAPI, and 7-AAD have high DNA-binding constants and are excluded by intact cells, so their uptake marks cells that have lost membrane integrity. Used with Annexin V, these dyes allow cells at different apoptotic stages to be distinguished.
| Name: | Annexin V-Cyanine5/PI Apoptosis Kit |
| SKU: | AKES041 |
| Application: | Annexin V detection of apoptosis |
| Detection method: | Fluorometric |
| Sample type: | Cell samples (suspension and adherent) |
| Assay time: | 40 min |
| Detection instrument: | Flow cytometer or fluorescence microscope |
| Dye type: | Cyanine5 |
| Channel set: | APC |
| Other reagents required: | PBS, deionized water |
- Annexin V-Cyanine5 detects PS externalization in a calcium-dependent manner
- PI co-stain identifies cells with lost membrane integrity and stains DNA
- Compatible with suspension and adherent cells
- Detection by flow cytometry (APC channel) or fluorescence microscopy
- One-step and two-step staining protocols provided
- Approximately 40 min assay time
Annexin V-Cyanine5 binds specifically to PS exposed on the outer leaflet of apoptotic cell membranes and is detected by flow cytometry or fluorescence microscopy. PI enters late apoptotic or necrotic cells with compromised membranes and stains DNA. Annexin V-Cyanine5 single-positive cells are early apoptotic; Annexin V-Cyanine5 and PI double-positive cells are necrotic or late apoptotic; PI single-positive events represent naked nuclei.
- Quantification of apoptotic and necrotic cell populations by flow cytometry
- Discrimination of early apoptotic, late apoptotic/necrotic, and nuclear-only events in treated cell cultures
- Dead cell discrimination during flow cytometric analysis
- Apoptosis detection in adherent cells by fluorescence microscopy
| Component | Storage |
| Annexin V-Cyanine5 Reagent | 2-8°C, protect from light |
| Annexin V Binding Buffer (10×) | 2-8°C |
| PI Reagent (50 µg/mL) | 2-8°C, protect from light |
- PBS
- Deionized water
- Flow cytometer with APC channel (and ECD channel for PI) or fluorescence microscope
- Centrifuge capable of 300 ×g
- Microcentrifuge tubes
- Vortex mixer
- Ice and dark incubation setup
- Apoptosis-inducing reagents of interest
Reagent preparation
- Dilute Annexin V Binding Buffer (10×) with deionized water to 1× working buffer before use.
One-step process
- Induce apoptosis in cells with the reagents of interest. Collect cell cultures, centrifuge at 300 ×g for 5 min, and discard the supernatant.
- Wash cells with PBS, resuspend gently, and count cells.
- Split the cell suspension into tubes at 1-5 × 105 cells per tube. Centrifuge at 300 ×g for 5 min, discard the supernatant, and wash with PBS.
- Resuspend cells in 500 µL of 1× Annexin V Binding Buffer.
- Add 5 µL Annexin V-Cyanine5 and 5 µL PI to each tube.
- Gently vortex and incubate at room temperature for 15-20 min in the dark.
- Analyze immediately with appropriate instrument settings. Otherwise, keep cells on ice in the dark and analyze within 1 h.
Two-step process
- Induce apoptosis in cells with the reagents of interest. Collect cell cultures, centrifuge at 300 ×g for 5 min, and discard the supernatant.
- Wash cells with PBS, resuspend gently, and count cells.
- Split the cell suspension into tubes at 1-5 × 105 cells per tube. Centrifuge at 300 ×g for 5 min, discard the supernatant, and wash with PBS.
- Resuspend cells in 100 µL of 1× Annexin V Binding Buffer.
- Add 2.5 µL Annexin V-Cyanine5 and 2.5 µL PI to each tube.
- Gently vortex and incubate at room temperature for 15-20 min in the dark.
- Add 400 µL of 1× Annexin V Binding Buffer to each tube and mix gently.
- Analyze immediately with appropriate instrument settings. Otherwise, keep cells on ice in the dark and analyze within 1 h.
| Storage: | 2-8°C, protect from light |
| Shelf life: | 12 months |
| Freeze/thaw: | Avoid freeze/thaw cycles |
| Shipping: | Ice bag |
Cautions
- For research use only.
- When detecting adherent cells, collect the suspension cells generated after apoptosis induction and analyze them together with the subsequently collected adherent cells.
- Minimize mechanical damage during adherent cell digestion.
- Avoid EDTA-containing trypsin where possible, as EDTA interferes with Annexin V binding to phosphatidylserine. If EDTA-containing trypsin is used, wash cells thoroughly after harvesting.
- Analyze samples as soon as possible after staining to avoid increases in apoptosis or necrosis.
- Avoid extended exposure of samples to direct light to protect fluorophores from quenching.
- Wear a lab coat and disposable gloves during experiments.