Description
Annexin V-FITC/PI Apoptosis Kit
The Annexin V-FITC/PI Apoptosis Kit detects apoptosis in suspension and adherent cells. Annexin V-FITC binds phosphatidylserine (PS) exposed on the outer leaflet of apoptotic cell membranes in a calcium-dependent manner, and propidium iodide (PI) stains DNA in cells that have lost membrane integrity. Researchers use the kit to distinguish early apoptotic, late apoptotic or necrotic, and PI-positive cell populations by flow cytometry or fluorescence microscopy.
Annexin V is a member of the annexin family that binds phosphatidylserine (PS) in a calcium-dependent manner. PS is normally restricted to the inner leaflet of the plasma membrane and becomes exposed on the outer leaflet during apoptosis, which allows Annexin V binding as an apoptosis marker.
Loss of membrane integrity in late apoptotic or necrotic cells allows nuclear dyes to enter and stain DNA. Used together with Annexin V, PI permits the separation of cells at different apoptotic stages, including PI single-positive cells, which appear as naked nuclei.
| Product Name: | Annexin V-FITC/PI Apoptosis Kit |
| SKU: | AKES032 |
| Application: | Apoptosis detection |
| Detection Method: | Fluorometric |
| Sample Type: | Cell samples (suspension and adherent cells) |
| Assay Time: | 40 min |
| Detection Instrument: | Flow cytometer; fluorescence microscope |
| Dye Type: | FITC (Annexin V); PI |
| Channel Set: | FITC |
| Research Use: | Research Use Only |
- Annexin V-FITC detects exposed phosphatidylserine on apoptotic cells in a calcium-dependent manner
- PI co-stain identifies cells with lost membrane integrity (late apoptotic or necrotic cells)
- Supports both suspension and adherent cell samples
- One-step and two-step staining protocols provided
- Readout by flow cytometry (FITC channel) or fluorescence microscopy
- Assay time of approximately 40 min
Annexin V-FITC, the FITC-conjugated format, binds specifically to PS on the outer leaflet of apoptotic cell membranes and can be detected with flow cytometry or fluorescence microscopy. Intact cells efficiently exclude PI, which has a high DNA-binding constant. Due to late apoptosis or loss of membrane integrity in necrotic cells, PI enters cells and stains DNA. Annexin V-FITC single-positive cells are early apoptotic, Annexin V-FITC and PI double-positive cells are necrotic or late apoptotic, and PI single-positive cells are naked nuclei.
- Detection of apoptosis in suspension and adherent cell populations
- Discrimination of early apoptotic, late apoptotic or necrotic, and PI single-positive cell populations by flow cytometry
- Dead cell discrimination during flow cytometric analysis
- Fluorescence microscopy imaging of PS exposure and membrane integrity in apoptotic cells
- DNA analysis in combination with apoptosis staining
| Component | Storage |
| Annexin V-FITC Reagent | 2-8°C, protect from light |
| Annexin V Binding Buffer (10×) | 2-8°C |
| PI Reagent (50 µg/mL) | 2-8°C, protect from light |
- Phosphate-buffered saline (PBS)
- Deionized water
- Flow cytometer with FITC channel setting or fluorescence microscope
- PerCP/Cy5.5 channel preferred for PI detection (ECD channel not preferred)
- Centrifuge capable of 300 ×g
- Vortex mixer
- Test tubes or microcentrifuge tubes
- Ice and dark incubation container for samples held before analysis
- Trypsin for adherent cell harvest (EDTA-free preferred)
Preparation of 1× Annexin V Binding Buffer
- Dilute Annexin V Binding Buffer (10×) with deionized water to 1× before use.
One-step process
- Induce apoptosis in cells with the reagents of interest. Collect cell cultures, centrifuge at 300 ×g for 5 min, and discard the supernatant. Wash cells with PBS, resuspend gently, and count cells.
- Split the cell suspension into tubes at 1 to 5×105 cells per tube. Centrifuge at 300 ×g for 5 min, discard the supernatant, wash with PBS, and discard the supernatant. Resuspend cells in 500 µL of 1× Annexin V Binding Buffer.
- Add 5 µL of Annexin V-FITC and 5 µL of PI to each tube.
- Gently vortex the cells and incubate at room temperature for 15 to 20 min in the dark.
- Analyze cells immediately with appropriate machine settings. Otherwise, place cells on ice in the dark and analyze within 1 h.
Two-step process
- Induce apoptosis in cells with the reagents of interest. Collect cell cultures, centrifuge at 300 ×g for 5 min, and discard the supernatant. Wash cells with PBS, resuspend gently, and count cells.
- Split the cell suspension into tubes at 1 to 5×105 cells per tube. Centrifuge at 300 ×g for 5 min, discard the supernatant, wash with PBS, and discard the supernatant. Resuspend cells in 100 µL of 1× Annexin V Binding Buffer.
- Add 2.5 µL of Annexin V-FITC and 2.5 µL of PI to each tube.
- Gently vortex the cells and incubate at room temperature for 15 to 20 min in the dark.
- Add 400 µL of 1× Annexin V Binding Buffer to each tube and mix gently.
- Analyze cells immediately with appropriate machine settings. Otherwise, place cells on ice in the dark and analyze within 1 h.
| Storage Temperature: | 2-8°C |
| Light Protection: | Store protected from light (shading light) |
| Shelf Life: | 12 months |
| Freeze/Thaw: | Avoid freeze/thaw cycles |
| Shipping: | Ice bag |
Cautions
- For research use only. Not for use in diagnostic or therapeutic procedures.
- When detecting adherent cells, collect the suspension cells generated after apoptosis induction and analyze them together with the subsequently collected adherent cells.
- Minimize mechanical damage during adherent cell digestion.
- Avoid EDTA-containing trypsin where possible, because EDTA interferes with Annexin V binding to phosphatidylserine. If EDTA-containing trypsin is used, wash cells thoroughly after harvesting to remove EDTA.
- Avoid extended exposure of samples to direct light to protect fluorophores from quenching.
- Analyze stained cells as soon as possible to limit increases in apoptotic or necrotic populations.
- Wear a lab coat and disposable gloves during the experiment.