Description
Annexin V-AF647/PI Apoptosis Kit
The Annexin V-AF647/PI Apoptosis Kit (AKES034) is a fluorescent staining kit for detecting apoptosis in suspension and adherent cell samples. Annexin V conjugated to AF647 binds phosphatidylserine (PS) exposed on the outer leaflet of the apoptotic cell membrane in a calcium-dependent manner, and propidium iodide (PI) identifies cells with compromised membrane integrity. Researchers use the combined staining to distinguish early apoptotic, late apoptotic/necrotic, and nuclear-only events by flow cytometry or fluorescence microscopy.
Annexin V is a member of the annexin family that binds phosphatidylserine (PS) in a calcium-dependent manner. In viable cells PS is restricted to the inner leaflet of the plasma membrane; during apoptosis it is exposed on the outer leaflet, where Annexin V binding marks the cell.
Loss of membrane integrity in late apoptotic or necrotic cells allows PI to enter and stain DNA. Combining Annexin V and PI allows cells at different apoptotic stages to be distinguished: Annexin V single-positive cells are early apoptotic, Annexin V and PI double-positive cells are necrotic or late apoptotic, and PI single-positive events are naked nuclei.
| Name: | Annexin V-AF647/PI Apoptosis Kit |
| SKU: | AKES034 |
| Application: | Annexin V detection of apoptosis |
| Detection Method: | Fluorometric; flow cytometry or fluorescence microscopy |
| Sample Type: | Cell samples (suspension and adherent) |
| Assay Time: | 40 min |
| Detection Instrument: | Flow cytometer |
| Dye Type: | AF647 |
| Ex/Em: | 650/670 nm |
| Channel Set: | APC |
| Other Reagents Required: | PBS, deionized water |
- Annexin V-AF647 detects PS exposure on the outer leaflet of the cell membrane in a calcium-dependent manner
- PI co-stain identifies late apoptotic or necrotic cells and distinguishes cell populations by apoptotic stage
- Compatible with suspension and adherent cells
- One-step or two-step staining protocol
- Approximately 40 min total assay time; 15 to 20 min room-temperature incubation
- Detection in the APC channel for AF647; PI detected in the ECD or PE channel
Annexin V conjugated to AF647 binds specifically to phosphatidylserine on the outer leaflet of apoptotic cell membranes in a calcium-dependent manner. PI, a nuclear dye with high DNA-binding affinity, is excluded by intact cells and enters cells with compromised membranes to stain DNA. Signals are read by flow cytometry (APC channel for Annexin V-AF647; ECD or PE channel for PI) or fluorescence microscopy.
- Quantifying early apoptotic, late apoptotic, and necrotic cell populations by flow cytometry
- Dead cell discrimination during flow cytometric analysis
- Apoptosis analysis in suspension cells and adherent cells following treatment with compounds of interest
- Fluorescence microscopy visualization of PS exposure and membrane integrity
| Component | Storage |
| Annexin V-AF647 Reagent | 2-8°C, protect from light |
| Annexin V Binding Buffer (10×) | 2-8°C |
| PI Reagent (50 µg/mL) | 2-8°C, protect from light |
- PBS
- Deionized water (for dilution of Annexin V Binding Buffer)
- Centrifuge capable of 300 ×g
- Flow cytometer with APC and ECD or PE channels (or fluorescence microscope)
- Ice and a 4 °C or on-ice holding option for samples awaiting analysis
- Trypsin solution without EDTA (for adherent cells, if needed)
Reagent preparation
- Dilute Annexin V Binding Buffer (10×) with deionized water to 1× Annexin V Binding Buffer before use.
One-step process
- Induce apoptosis in cells with the reagent of interest. For suspension cells, collect cultures, centrifuge at 300 ×g for 5 min, and discard the supernatant. Wash with PBS, resuspend gently, and count cells.
- Split the cell suspension into tubes at 1 to 5 × 105 cells per tube. Centrifuge at 300 ×g for 5 min and discard the supernatant. Wash with PBS, discard the supernatant, and add 500 µL of 1× Annexin V Binding Buffer to resuspend the cells.
- Add 5 µL of Annexin V-AF647 and 5 µL of PI to each tube.
- Gently vortex and incubate at room temperature for 15 to 20 min in the dark.
- Analyze immediately on the flow cytometer. Otherwise, place cells on ice in the dark and analyze within 1 h.
Two-step process
- Induce apoptosis in cells with the reagent of interest. For suspension cells, collect cultures, centrifuge at 300 ×g for 5 min, and discard the supernatant. Wash with PBS, resuspend gently, and count cells.
- Split the cell suspension into tubes at 1 to 5 × 105 cells per tube. Centrifuge at 300 ×g for 5 min and discard the supernatant. Wash with PBS, discard the supernatant, and add 100 µL of 1× Annexin V Binding Buffer to resuspend the cells.
- Add 2.5 µL of Annexin V-AF647 and 2.5 µL of PI to each tube.
- Gently vortex and incubate at room temperature for 15 to 20 min in the dark.
- Add 400 µL of 1× Annexin V Binding Buffer to each tube and mix gently.
- Analyze immediately on the flow cytometer. Otherwise, place cells on ice in the dark and analyze within 1 h.
| Storage: | 2-8°C, protect from light |
| Shelf Life: | 12 months |
| Shipping: | Ice bag |
| Post-Preparation Handling: | Avoid freeze/thaw cycles |
Cautions
- For research use only. Not for use in diagnostic or therapeutic procedures.
- Trypsin digestion solutions should not contain EDTA, because EDTA interferes with Annexin V binding to phosphatidylserine. If EDTA-containing trypsin is used, wash cells thoroughly after harvesting.
- When analyzing adherent cells, collect the suspension cells generated after apoptosis induction and analyze them together with the adherent cells.
- Minimize mechanical damage during digestion of adherent cells.
- Analyze samples as soon as possible after staining to avoid increases in apoptotic or necrotic populations.
- Avoid extended exposure of stained samples to direct light to protect the fluorophores from quenching.
- Avoid freeze/thaw cycles.