Description
CuZn/Mn Superoxide Dismutase (CuZn-SOD/Mn-SOD) Activity Assay Kit (Hydroxylamine)
The CuZn/Mn Superoxide Dismutase (CuZn-SOD/Mn-SOD) Activity Assay Kit (Hydroxylamine) (MAES0035) measures total SOD (T-SOD), CuZn-SOD and Mn-SOD activity in serum, plasma, urine, cells, cell culture supernatant and tissue homogenates. The kit uses a xanthine/xanthine oxidase superoxide-generating system and a colorimetric readout on a microplate reader. It is used in oxidative stress research to quantify SOD activity and to separate the CuZn-SOD and Mn-SOD contributions within a sample.
Superoxide dismutases (SODs) catalyze the dismutation of superoxide anion. In the cells of higher animals there are two forms, CuZn-SOD and Mn-SOD, and their sum equals total SOD (T-SOD). Measuring these fractions separately is relevant to oxidative stress studies.
Mn-SOD activity is lost after the sample pretreatment step (extraction with extracting solution), whereas CuZn-SOD activity is retained. The kit therefore measures T-SOD on untreated samples and CuZn-SOD on pretreated samples, and calculates Mn-SOD as T-SOD minus CuZn-SOD.
| Product Name: | CuZn/Mn Superoxide Dismutase (CuZn-SOD/Mn-SOD) Activity Assay Kit (Hydroxylamine) |
| SKU: | MAES0035 |
| Size: | 96 Assays |
| Analytes: | T-SOD, CuZn-SOD, Mn-SOD activity |
| Sample Types: | Serum, plasma, urine, cells, cell culture supernatant, tissue homogenates |
| Detection Method: | Colorimetric (hydroxylamine nitrite chromogenic reaction) |
| Instrument: | Microplate reader (530-570 nm) |
| Assay Time: | 1 h 10 min |
| Intra-assay CV: | 5.1% |
| Inter-assay CV: | 9.6% |
| Research Area: | Oxidative stress; enzymes |
| Research Use Only: | Yes |
| Sensitivity (analytical): | 1.35 U/mL |
| Detection Range: | 1.35-62 U/mL |
| Intra-assay CV: | 5.1% |
| Inter-assay CV: | 9.6% |
| Recovery: | 99% (average) |
| Detection Wavelength: | 530-570 nm (read at 550 nm) |
| Sample Volume (per manual): | 5 µL per well |
| Synonyms: | T-SOD; CuZn-SOD; Mn-SOD |
- Measures T-SOD, CuZn-SOD and Mn-SOD activity; Mn-SOD is calculated by subtraction
- Colorimetric hydroxylamine-based readout at 530-570 nm (read at 550 nm)
- Detection range 1.35-62 U/mL; sensitivity 1.35 U/mL
- Validated for serum, plasma, urine, cells, cell culture supernatant and tissue homogenates
- Assay time approximately 1 h 10 min on a microplate reader
- 96 Assays per kit, research use only
Superoxide anion produced by the xanthine and xanthine oxidase system oxidizes hydroxylamine to form nitrite, which develops a purplish red color after the chromogenic reaction. SOD in the sample specifically inhibits superoxide anion, reducing nitrite formation. The OD value is therefore lower than the control, and SOD activity is calculated from the inhibition ratio. One unit (U) is defined as the enzyme amount giving 50% inhibition in a 1 mL reaction system (for tissue and cell samples, per 1 mg tissue protein).
- Measurement of total SOD and CuZn-SOD/Mn-SOD activity in serum, plasma and urine samples from animal studies
- Assessment of SOD activity in mouse and rat tissue homogenates (for example, liver, brain and kidney)
- Analysis of SOD activity in cultured cells and cell culture supernatants
- Oxidative stress research comparing antioxidant enzyme activity across experimental conditions
| Component | Quantity | Storage |
| Reagent 1: Buffer Solution | 1.2 mL × 1 vial | 2-8 °C, 12 months |
| Reagent 2: Nitrosogenic Agent | 1.2 mL × 1 vial | 2-8 °C, 12 months |
| Reagent 3: Substrate Solution | 1.2 mL × 1 vial | 2-8 °C, 12 months |
| Reagent 4: Enzyme Stock Solution | 0.06 mL × 1 vial | -20 °C, 12 months |
| Reagent 5: Enzyme Diluent | 1.2 mL × 1 vial | 2-8 °C, 12 months |
| Reagent 6: Chromogenic Agent A (powder) | 1 vial | 2-8 °C, 12 months, protect from light |
| Reagent 7: Chromogenic Agent B (powder) | 1 vial | 2-8 °C, 12 months, protect from light |
| Reagent 8: Chromogenic Agent C | 6 mL × 1 vial | 2-8 °C, 12 months |
| Reagent 9: Extracting Solution | 12 mL × 1 vial | 2-8 °C, 12 months, protect from light |
| 96-well microplate | 96 wells × 1 | Room temperature |
| Plate sealer | 2 pieces | Room temperature |
| Sample layout sheet | 1 piece | Room temperature |
- Microplate reader capable of 530-570 nm reading (550 nm used in the protocol)
- Micropipettor and multichannel pipette
- Centrifuge (including 10,000 × g and 3,500 × g capability)
- Incubator set to 37 °C
- Vortex mixer
- Double-distilled water
- Normal saline (0.9% NaCl)
- PBS (0.01 M, pH 7.4) for washing tissue and cells
- Homogenizer (glass dounce for tissue; ultrasonic cell disruptor for cells)
- Ice and a 70-80 °C water bath for dissolving chromogenic Agent A
- Protein concentration assay for tissue and cell lysates (not included in the kit)
Reagent preparation
- Keep Enzyme Stock Solution on ice during use. Equilibrate other reagents to room temperature before use.
- Buffer working solution: per well, mix 9 µL Buffer Solution with 81 µL double-distilled water (90 µL per well). Store at 2-8 °C for 3 months.
- Enzyme stock working solution: for example, mix 5 µL Enzyme Stock Solution with 95 µL Enzyme Diluent (100 µL total). Store at 2-8 °C for 3 days.
- Chromogenic Agent A application solution: dissolve one vial in 70-80 °C double-distilled water to a final volume of 9 mL. Store at 2-8 °C for 3 months, protected from light.
- Chromogenic Agent B application solution: dissolve one vial in double-distilled water to a final volume of 9 mL. Store at 2-8 °C for 1 month, protected from light.
- Chromogenic agent (per well, 200 µL): mix 75 µL Agent A solution, 75 µL Agent B solution and 50 µL Agent C. Prepare on the spot.
- Enzyme working solution (per well, 30 µL, on ice): mix 10 µL Nitrosogenic Agent, 10 µL Substrate Solution and 10 µL enzyme stock working solution. Prepare on the spot and use within 20 min.
- Non-enzyme working solution (per well, 30 µL): mix 10 µL Nitrosogenic Agent, 10 µL Substrate Solution and 10 µL Enzyme Diluent.
Sample preparation
- Serum and plasma: assay directly. If not assayed the same day, store at -80 °C for up to 1 month.
- Urine: centrifuge fresh urine at 10,000 × g for 15 min; keep the supernatant on ice. If not assayed the same day, store at -80 °C for up to 1 month.
- Tissue: homogenize 20 mg tissue in 180 µL normal saline on ice (initial recommendation 20 mg). Centrifuge at 10,000 × g for 10 min at 4 °C; keep the supernatant on ice.
- Cells: homogenize 10^6 cells in 300-500 µL normal saline with an ultrasonic cell disruptor at 4 °C. Centrifuge at 10,000 × g for 10 min at 4 °C; keep the supernatant on ice.
- Determine protein concentration of tissue and cell supernatants separately (required for per-mg protein calculation).
- Pretreatment for CuZn-SOD: mix 0.1 mL sample with 0.1 mL Extracting Solution by vortexing for 1 min, then centrifuge at 3,500 × g for 15 min. Use the supernatant for CuZn-SOD. Prepare a control by mixing 0.1 mL normal saline with 0.1 mL Extracting Solution and processing identically.
Sample dilution and pre-test
- Run a pre-test with 2-3 samples and a dilution series. Choose a dilution where SOD inhibition is 25-45% (optimal); acceptable range is 15-55%.
- If inhibition is >55%, dilute the sample or reduce sample volume. If inhibition is <15%, increase sample volume.
- Reference dilution factors (manual, for reference only): mouse serum 5-10; rat serum 6-15; urine 2-3; human hydrothorax 2-3; 10% mouse liver homogenate 100-200; 10% mouse brain homogenate 20-30; 10% mouse kidney homogenate 50-120; 10% rat kidney homogenate 50-120; HepG2 cells (5.21 mg prot/mL) 15-25; cell culture supernatant 1. Diluent is normal saline (0.9% NaCl) or PBS (0.01 M, pH 7.4).