Description
Glucose-6-phosphate (G6P) Colorimetric Assay Kit
The Glucose-6-phosphate (G6P) Colorimetric Assay Kit quantifies G6P in serum, plasma, and animal tissue homogenates. G6P is oxidized by glucose-6-phosphate dehydrogenase, and the resulting NADPH reduces WST-8 to a formazan product read at 450 nm. Researchers use the kit to study glycolysis, the pentose phosphate pathway, and carbohydrate storage in metabolic studies.
Glucose-6-phosphate (G6P) is a small sugar phosphate formed when hexokinase phosphorylates glucose at the sixth carbon. It is a common metabolite of sugar metabolism. In glycolysis, G6P is converted by phosphoglucose isomerase to fructose-6-phosphate, which feeds the remaining glycolytic steps. In the pentose phosphate pathway, G6P is the first substrate, and this pathway is the main route for generating NADPH. G6P can also be converted to glycogen or starch for storage.
Researchers measure G6P to study glycolysis and lipid metabolism, energy metabolism, and disulfidptosis, the research areas associated with this kit. Because G6P sits at the junction of glycolysis, the pentose phosphate pathway, and glycogen storage, its content in tissue and body fluids can reflect how carbohydrate flux is partitioned. The kit is intended to quantify total G6P in serum, plasma, and animal tissue samples for research use only.
The assay is a coupled enzymatic colorimetric reaction. In the presence of glucose-6-phosphate dehydrogenase, G6P is oxidized to gluconolactone-6-phosphate, and NADP+ is reduced to NADPH. The electron coupling reagent 1-MPMS then transfers electrons from NADPH to WST-8, which forms an orange formazan with a maximum absorbance near 450 nm. The amount of formazan is proportional to total G6P in the sample. Each sample is read in a sample well and a control well, and the difference (ΔA = A2 − A1) is used for calculation after a 10 min incubation at 37 °C.
Serum and plasma samples are tested directly. If testing does not occur on the same day, serum or plasma can be stored at -80 °C for up to one month. Animal tissue is washed in cold PBS, homogenized in extracting solution at 4 °C, and centrifuged to remove insoluble material. The supernatant is kept on ice until testing, and its protein concentration is measured separately so that results can be expressed per gram of protein. Samples should be diluted according to the listed dilution factors before testing.
The analytical sensitivity is 5.6 µmol/L G6P, determined from 20 replicate zero standards. The detection range is 5.6 to 500 µmol/L. Manual replicate data showed intra-assay CV values of 1.7 to 2.6% and inter-assay CV values of 4.2 to 4.5%, and the product page lists 2.1% and 4.3%, respectively. Spike recovery averaged 95%, with individual recoveries between 92% and 98%. Because standard curves vary with operator, pipetting, and temperature, users should generate a fresh curve with each run.
| Product name: | Glucose-6-phosphate (G6P) Colorimetric Assay Kit |
| SKU: | MAES0025 |
| Size: | 96 Assays |
| Sample types: | Serum, plasma, animal tissue |
| Detection method: | Colorimetric (WST-8 formazan) |
| Instrument: | Microplate reader, 450 nm |
| Assay time: | 35 min |
| Detection range: | 5.6-500 µmol/L |
| Research area: | Glycolysis, carbohydrate metabolism, energy metabolism |
| Sensitivity: | 5.6 µmol/L G6P |
| Detection range: | 5.6-500 µmol/L |
| Intra-assay CV: | 1.7-2.6% (three human serum samples, 20 replicates each) |
| Inter-assay CV: | 4.2-4.5% (three human serum samples, 20 assays in duplicate, three operators) |
| Recovery: | Average 95% (individual samples 92-98%) |
| Sample volume: | 50 µL per sample well and per control well |
| Assay time: | 35 min |
| Measurement wavelength: | 450 nm |
- Measures G6P in serum, plasma, and animal tissue homogenates
- WST-8 formazan colorimetric readout at 450 nm on a microplate reader
- Detection range 5.6-500 µmol/L; analytical sensitivity 5.6 µmol/L
- Intra-assay CV 1.7-2.6%; inter-assay CV 4.2-4.5%
- Assay time approximately 35 min; sample volume 50 µL per well
- Research Use Only
In the presence of glucose-6-phosphate dehydrogenase, G6P is oxidized to gluconolactone-6-phosphate (6-PG), and NADP+ is reduced to NADPH. The electron coupling reagent 1-MPMS transfers electrons from NADPH to WST-8, forming an orange formazan with an absorption maximum near 450 nm. The formazan produced is proportional to the total G6P content of the sample.
- Quantifying G6P in serum and plasma for glycolysis and carbohydrate metabolism studies
- Measuring G6P in animal tissue homogenates to assess tissue-level sugar metabolism
- Investigating the pentose phosphate pathway and NADPH-generating metabolic flux
- Studying glycogen and starch storage pathways that branch from G6P
- Energy metabolism research in animal models
| Component | Quantity | Storage |
| Reagent 1: Extracting Solution | 60 mL × 2 vials | -20°C, 12 months |
| Reagent 2: Buffer Solution | 5 mL × 1 vial | -20°C, 12 months |
| Reagent 3: Chromogenic Agent | 1.5 mL × 2 vials | -20°C, 12 months; protect from light |
| Reagent 4: Enzyme Agent (powder) | 1 vial | -20°C, 12 months |
| Reagent 5: 10 mmol/L G6P Standard | 0.5 mL × 1 vial | -20°C, 12 months |
| 96-well microplate | 1 plate | No special requirement |
| Plate sealer | 2 pieces | No special requirement |
| Sample layout sheet | 1 sheet | No special requirement |
- Microplate reader capable of 450 nm absorbance
- Micropipettes and tips
- Incubator set to 37°C
- Centrifuge (including 10000 × g for tissue clarification and brief spins of small reagent volumes)
- Double-distilled water
- Tissue homogenizer (dounce type)
- Cold PBS, 0.01 M, pH 7.4 (tissue washing)
- Ice
- Protein concentration assay (user-supplied) for normalizing tissue results
Serum/plasma
- Detect serum and plasma samples directly.
- If samples are not tested on the same day, store serum or plasma at -80 °C for up to one month.
- Dilute samples before testing using the recommended dilution factor: human plasma 1; mouse serum 2 to 3; rat plasma 1; porcine serum 1.
- Use extracting solution as the diluent.
- For sample types not listed, perform a pretest to confirm the dilution factor.
Animal tissue
- Harvest the amount of tissue needed for each assay (initial recommendation: 20 mg).
- Wash tissue in cold PBS (0.01 M, pH 7.4).
- Homogenize 20 mg of tissue in 180 µL of extracting solution with a dounce homogenizer at 4 °C.
- Centrifuge at 10000 × g for 10 min at 4 °C to remove insoluble material.
- Collect the supernatant and keep it on ice for detection.
- Determine the protein concentration of the supernatant separately for use in the calculation.
- Dilute the 10% tissue homogenate before testing using the recommended dilution factor: 10% rat spleen homogenate 2 to 3; 10% rat heart homogenate 2 to 3; 10% rat liver homogenate 2 to 3; 10% mouse lung homogenate 1.
- Use extracting solution as the diluent.
- For tissue types not listed, perform a pretest to confirm the dilution factor.
Reagent preparation
- Equilibrate reagents to room temperature before use.
- Prepare 1 mmol/L standard fresh: dilute 38 µL of 10 mmol/L G6P standard with 342 µL extracting solution and mix well.
- Prepare enzyme working solution fresh: dissolve one vial of enzyme agent in 1.8 mL buffer solution and mix well. Aliquots may be stored at -20°C for 7 days.
- Prepare control working solution fresh for each well: mix 25 µL buffer solution and 25 µL chromogenic agent (50 µL per well). Protect from light.
- Prepare sample working solution fresh for each well: mix 25 µL chromogenic agent and 25 µL enzyme working solution (50 µL per well). Protect from light.
Standard curve preparation
- Prepare a fresh standard set for each assay and discard working dilutions after use.
- Dilute the 1.0 mmol/L standard with extracting solution as follows: 0 µmol/L (0 µL standard + 200 µL extracting solution), 50 µmol/L (10 µL + 190 µL), 100 µmol/L (20 µL + 180 µL), 200 µmol/L (40 µL + 160 µL), 300 µmol/L (60 µL + 140 µL), 350 µmol/L (70 µL + 130 µL), 400 µmol/L (80 µL + 120 µL), 500 µmol/L (100 µL + 100 µL).
Serum (plasma) sample: G6P content (µmol/L) = (ΔA − b) ÷ a × f Tissue sample: G6P content (µmol/g prot) = (ΔA − b) ÷ a ÷ C_pr × f
- ΔA = A450 of the sample well (A2) minus A450 of the control well (A1), i.e., ΔA = A2 − A1.
- a is the slope and b is the intercept of the standard curve, y = ax + b, where y is the absolute OD value (mean OD of each standard minus the mean OD of the blank standard) and x is the concentration in µmol/L.
- f is the dilution factor of the sample before testing. Multiply by f to correct for dilution, and use f = 1 for undiluted samples.
- C_pr is the protein concentration of the tissue supernatant in g prot/L. Dividing by C_pr expresses tissue G6P content in µmol/g prot.
- Results from serum and plasma are reported in µmol/L, and results from tissue are reported in µmol/g prot.
What sample types can be tested with this kit?
The kit measures total G6P in serum, plasma, and animal tissue samples. Serum and plasma are tested directly, and tissue must first be homogenized and centrifuged as described in the sample preparation section.
How should the kit and samples be stored?
Kit reagents should be stored at -20 °C for 12 months and protected from light. Serum or plasma that is not tested on the same day can be stored at -80 °C for up to one month.
What should I do if my results fall outside the detection range?
The detection range is 5.6 to 500 µmol/L. If a sample is outside this range, apply an extra dilution or concentration to bring it within range, and apply the appropriate correction factor in the calculation.
What key points should I follow to avoid assay problems?
Prevent bubbles when adding liquid to the microplate. Prepare the enzyme working solution, control working solution, and sample working solution on the day of use, and discard working standard dilutions after use. Aliquoted enzyme working solution can be stored at -20 °C for 7 days.
What instrument settings and assay time are required?
Read absorbance at 450 nm on a microplate reader. After mixing for 5 s, incubate at 37 °C for 10 min, and the total assay time is 35 min.
| Storage: | -20°C, protected from light |
| Shelf Life: | 12 months |
Notes
- For research use only; do not use in clinical diagnosis.
- Prevent bubbles when adding liquid to the microplate.
- Prepare the 1 mmol/L standard, enzyme working solution, control working solution, and sample working solution fresh on the day of use; keep the control and sample working solutions protected from light.
- Discard working standard dilutions after use and prepare a fresh standard curve for every run.
- Store reagents strictly at the specified conditions and do not mix reagents from different kits.