Human 4-Hydroxyphenylpyruvate Dioxygenase (HPD) ELISA Kit
The Human 4-Hydroxyphenylpyruvate Dioxygenase (HPD) ELISA Kit is a highly sensitive and specific assay designed for the accurate detection of HPD levels in human serum, plasma, and cell culture supernatants. This kit provides reliable and reproducible results, making it an excellent tool for various research applications.HPD is an enzyme that plays a critical role in the tyrosine catabolic pathway, converting 4-hydroxyphenylpyruvate to homogentisate.
Dysregulation of HPD activity has been linked to various metabolic disorders, including tyrosinemia, making it an important biomarker for studying these conditions and potential therapeutic interventions.With its advanced technology and user-friendly protocols, the Human HPD ELISA Kit is an invaluable tool for researchers studying metabolic disorders and looking to gain insight into the role of HPD in human health and disease.
Product Name:
Human 4-Hydroxyphenylpyruvate Dioxygenase (HPD) ELISA Kit
Matrices listed below were spiked with certain level of recombinant the index and the recovery rates were calculated by comparing the measured value to the expected amount of the index in samples.
Matrix
Recovery range (%)
Average(%)
Serum (n=5)
80-102
91
EDTA plasma (n=5)
81-99
90
Heparin plasma (n=5)
80-89
84
Linearity:
The linearity of the kit was assayed by testing samples spiked with appropriate concentration of the index and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample
1:2
1:4
1:8
1:16
Serum (n=5)
82-96%
83-98%
81-99%
93-101%
EDTA plasma (n=5)
88-101%
86-95%
90-102%
80-93%
Heparin plasma (n=5)
80-91%
82-90%
95-104%
79-95%
Intra-assay Precision:
Intra-Assay: CV <10%. 3 samples with low, middle and high level the index were tested 20 times on one plate, respectively.
Inter-assay Precision:
Inter-Assay: CV <12%. 3 samples with low, middle and high level the index were tested on 3 different plates, 8 replicates in each plate.
Stability:
The stability of ELISA kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage conditions. Note: To minimize unnecessary influences on the performance, operation procedures and lab conditions, especially room temperature, air humidity and incubator temperatures should be strictly regulated. It is also strongly suggested that the whole assay is performed by the same experimenter from the beginning to the end.
Step
Protocol
1.
Prepare all reagents, samples and standards
2.
Add 100µL standard or sample to each well. Incubate 2 hours at 37°C
3.
Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C
4.
Aspirate and wash 3 times
5.
Add 100µL prepared Detection Reagent B. Incubate 1 hour at 37°C
6.
Aspirate and wash 5 times
7.
Add 90µL Substrate Solution. Incubate 15-25 minutes at 37°C
8.
Add 50µL Stop Solution. Read at 450nm immediately.
