Description
Human CD3/CD28 T Cell Activation Beads
Human CD3/CD28 T Cell Activation Beads (AKES212) are magnetic beads coupled with anti-CD3 and anti-CD28 antibodies. They provide the primary TCR signal and the co-stimulatory signal needed to activate and expand human T cells in vitro. Researchers use them to stimulate sorted human T cells or T cells in PBMCs, and the beads can be removed from culture with a magnetic rack before downstream analysis.
CD3 and CD28 are cell-surface molecules that control T lymphocyte activation. T cell activation requires two signals. The first is antigen-specific: the TCR/CD3 complex binds an MHC II antigen-peptide complex on antigen-presenting cells (APCs). The second is a non-specific co-stimulatory signal, generated when co-stimulatory molecules on APCs engage their receptors on T cells. CD28 is one of these co-stimulatory molecules. Together, these signals drive T cell activation and proliferation.
Researchers use this reagent to activate and expand human T cells in vitro, either sorted T cells or T cells within peripheral blood mononuclear cells (PBMCs). The beads supply the primary TCR signal and the co-stimulatory signal that T cells need to proliferate in culture, so that expanded T cell populations can be generated for downstream studies. The source material does not name specific disease models, so applications are described in terms of T cell physiology: activation, proliferation, and expansion. Because the beads can be removed with a magnetic rack, cultured cells can be carried into later experiments. For research use only.
The beads are made by coupling anti-CD3 and anti-CD28 antibodies to magnetic beads. They are supplied as a liquid containing 1×10^8 beads/mL in phosphate buffered saline (PBS). For activation, beads are added to purified T cells at 10 µL per 1×10^6 cells, a 1:1 bead-to-cell ratio, in 1 mL of culture medium in a tissue culture plate. The mixture is mixed by pipetting and incubated at 37°C in a humidified CO2 incubator. Activation is monitored by CD25 and CD69 expression, measured before activation and 2 days after activation. Proliferation is assessed by carboxyfluorescein succinimidyl ester (CFSE) staining, with CFSE-stained T cells cultured for 3 days.
The product is listed for human T cells, with sample types of whole blood, PBMC, and pre-isolated T cells. The antibodies used are monoclonal with a mouse host. The provided protocol begins with 1×10^6 purified T cells. The beads must be stored at 2 to 8°C and must not be frozen. Before use, the vial is resuspended to obtain a uniform suspension, and the beads should be thoroughly vortexed and mixed. Air bubbles should be avoided during aspiration to prevent variation in bead amount. After magnetic separation, liquid should be added as soon as possible to keep the beads from drying out.
| Product Name: | Human CD3/CD28 T Cell Activation Beads |
| SKU: | AKES212 |
| Target: | CD3 and CD28 on human T cells |
| Reactivity: | Human |
| Feature: | Activation and expansion of sorted T cells or T cells in PBMCs |
| Format: | Liquid, magnetic beads |
| Research Use: | For research use only |
- Anti-CD3 and anti-CD28 antibodies coupled to magnetic beads
- Provides TCR (CD3) and co-stimulatory (CD28) signals for T cell activation
- Supports activation and expansion of sorted human T cells or T cells in PBMCs
- Beads are removed from cultured cells using a magnetic rack
- Supplied as a liquid at 1×108 beads/mL; store at 2 to 8°C, do not freeze
- In vitro activation of sorted human T cells or T cells in PBMCs
- Expansion of human T cells in culture with IL-2 supplementation
- Proliferation studies, such as CFSE-based tracking of dividing T cells
- Analysis of early activation markers such as CD25 and CD69 by flow cytometry
- Magnetic removal of beads from cultures before downstream assays
| Component | Quantity | Storage |
| Human CD3/CD28 T Cell Activation Beads (anti-CD3 and anti-CD28 coupled magnetic beads, dispersed in PBS) | 1×108 beads/mL | 2 to 8°C, do not freeze |
- RPMI-1640 complete medium (RPMI-1640 with penicillin at a final concentration of 100 U/mL and fetal bovine serum at a final concentration of 10%)
- Recombinant human IL-2
- Flat-bottom tissue culture plates of suitable size
- 1.5 mL magnetic rack
- Magnet
- Mixer or vortex mixer
- Humidified CO2 incubator set to 37°C
- Sterile 1.5 mL microcentrifuge tubes
Purified T cells (activation)
- Before use, resuspend the beads in the vial to obtain a uniform suspension.
- Take the required amount of bead suspension into a 1.5 mL tube.
- Place the tube on a 1.5 mL magnetic rack for 3 minutes and discard the supernatant while the tube remains on the rack.
- Add an equal volume of RPMI-1640 complete medium and vortex for 10 seconds to mix.
- Place the tube on a 1.5 mL magnetic rack for 3 minutes and discard the supernatant while the tube remains on the rack.
- Add the same volume of RPMI-1640 complete medium as the bead suspension, resuspend the beads by vortexing for 10 seconds, and set aside.
- Start with 1×10^6 purified T cells in 1 mL medium in a tissue culture plate.
- Add 10 µL of beads per 1×10^6 T cells (a 1:1 ratio of beads to T cells) and mix by blowing.
- Incubate in a humidified CO2 incubator at 37°C.
- Harvest the activated T cells according to the experimental requirements.
- For flow cytometry applications, remove the beads before staining: place the tube on a magnetic rack for 3 minutes and collect the supernatant containing the cells for testing.
Purified T cells (expansion)
- Wash the beads as described for activation: resuspend the vial, transfer the required volume to a 1.5 mL tube, wash twice on a magnetic rack with an equal volume of RPMI-1640 complete medium, and resuspend in the same volume of medium.
- Start with 1×10^6 purified T cells in 1 mL medium in a tissue culture plate.
- Add 10 µL of beads per 1×10^6 T cells (a 1:1 ratio of beads to T cells) and 8 ng/mL IL-2, then mix by blowing.
- Incubate in a humidified CO2 incubator at 37°C.
- Count the cells every two days. When the cell density exceeds 2.5×10^6 cells/mL or the medium turns yellow, split the cultures back to a density of 0.5–1×10^6 cells/mL in culture medium containing recombinant IL-2.
Wash beads
- Before use, resuspend the beads in the vial by vortexing to obtain a uniform suspension.
- Transfer the required volume of bead suspension to a 1.5 mL tube.
- Place the tube on a 1.5 mL magnetic rack for 3 minutes and discard the supernatant while the tube remains on the rack.
- Add an equal volume of RPMI-1640 complete medium and vortex for 10 seconds to mix.
- Place the tube on the magnetic rack for 3 minutes and discard the supernatant while the tube remains on the rack.
- Add the same volume of RPMI-1640 complete medium as the original bead suspension, resuspend the beads by vortexing for 10 seconds, and set aside.
Activate T cells
- Start with 1×106 purified T cells in 1 mL medium in a tissue culture plate.
- Add 10 µL of beads per 1×106 T cells (1:1 bead-to-cell ratio) and mix by pipetting.
- Incubate in a humidified CO2 incubator at 37°C.
- Harvest the activated T cells according to the experimental requirements.
- For flow cytometry, remove beads before staining: place the tube on a magnetic rack for 3 minutes and collect the supernatant containing the cells.
Expand T cells
- Start with 1×106 purified T cells in 1 mL medium in a tissue culture plate.
- Add 10 µL of beads per 1×106 T cells (1:1 bead-to-cell ratio) and 8 ng/mL IL-2, then mix by pipetting.
- Incubate in a humidified CO2 incubator at 37°C.
- Count cells every two days. When cell density exceeds 2.5×106 cells/mL or the medium turns yellow, split cultures back to 0.5 to 1×106 cells/mL in culture medium containing recombinant IL-2.
Which sample types can be used with these beads?
The product is listed for whole blood, PBMC, and pre-isolated T cells, with human T cells as the reactive cell type. The provided protocol starts from 1×10^6 purified T cells in 1 mL of medium.
How should the beads be stored, and can they be frozen?
Store the beads at 2 to 8°C. Do not freeze them, and do not freeze the beads at any point, as freezing is listed as a caution. The product has a 12-month expiration date.
What should I do if cell activation is poor or cell death is high?
If cell activation is poor, the amount of beads can be increased. If there is more cell death, the amount of beads can be reduced. Adjust the bead amount as needed based on these results.
Do I need to remove the beads before analysis?
For flow cytometry applications, the beads must be removed before staining. Place the tube on a magnetic rack for at least 3 minutes and collect the supernatant containing the cells.
What equipment and incubation conditions are required?
The protocol requires a magnet, a mixer, and a humidified CO2 incubator set to 37°C. Cultures are incubated in tissue culture plates, and the beads are removed from cultured cells using a magnetic rack.
How long does an activation or proliferation experiment take?
CD25 and CD69 expression is measured before activation and 2 days after activation. For proliferation, CFSE-stained T cells are cultured for 3 days, and during expansion cells are counted every two days.
| Storage: | 2 to 8°C |
| Do Not: | Freeze |
| Shelf Life: | 12 months |
| Shipping: | Ice bag |
Cautions
- For scientific research use only.
- Vortex and mix the beads thoroughly before use.
- Avoid air bubbles during aspiration so the bead volume is accurate.
- Keep tubes on the magnetic rack for at least 3 minutes to avoid bead loss.
- Remove the supernatant slowly and carefully to avoid aspirating beads.
- Wash with 0.1 mL for bead volumes less than 0.1 mL, or with an equal volume for volumes greater than 0.1 mL.
- Resuspend the beads in liquid as soon as possible after magnetic separation to prevent drying.
- If activation is weak, the bead amount can be increased. If cell death is high, the bead amount can be reduced.
- For flow cytometry, remove the beads before staining.
- Do not freeze the beads.