Product Name:	Human Nuclear receptor coactivator 1 (NCOA1) ELISA Kit
SKU:	HUEB0595
Size:	96T
Target:	Human Nuclear receptor coactivator 1 (NCOA1)
Synonyms:	Class E basic helix-loop-helix protein 74, Protein Hin-2, RIP160, Renal carcinoma antigen NY-REN-52, Steroid receptor coactivator 1, bHLHe74, SRC-1, NCoA-1, BHLHE74, SRC1
Assay Type:	Sandwich
Detection Method:	ELISA
Reactivity:	Human
Detection Range:	0.156-10ng/mL
Sensitivity:	0.056ng/mL

Intra CV:

4.9%

Inter CV:

9.7%

Linearity:

Sample	1:2	1:4	1:8	1:16
Serum(N=5)	99-111%	97-107%	89-100%	100-110%
EDTA Plasma(N=5)	85-94%	102-112%	82-92%	104-114%
Heparin Plasma(N=5)	93-103%	96-106%	113-122%	111-120%

Recovery:

Sample Type	Average(%)	Recovery Range(%)
Serum	98	92-104
Plasma	100	94-106

Function:

Nuclear receptor coactivator that directly binds nuclear receptors and stimulates the transcriptional activities in a hormone-dependent fashion. Involved in the coactivation of different nuclear receptors, such as for steroids (PGR, GR and ER), retinoids (RXRs), thyroid hormone (TRs) and prostanoids (PPARs). Also involved in coactivation mediated by STAT3, STAT5A, STAT5B and STAT6 transcription factors. Displays histone acetyltransferase activity toward H3 and H4; the relevance of such activity remains however unclear. Plays a central role in creating multisubunit coactivator complexes that act via remodeling of chromatin, and possibly acts by participating in both chromatin remodeling and recruitment of general transcription factors. Required with NCOA2 to control energy balance between white and brown adipose tissues. Required for mediating steroid hormone response. Isoform 2 has a higher thyroid hormone-dependent transactivation activity than isoform 1 and isoform 3.

Uniprot:	Q15788
Sample Type:	Serum, plasma, tissue homogenates, cell culture supernates and other biological fluids
Specificity:	Natural and recombinant human Nuclear receptor coactivator 1
Sub Unit:	Interacts with the methyltransferase CARM1 (By similarity). Interacts with NCOA6 and NCOA2. Interacts with the FDL motif of STAT5A and STAT5B. Interacts with the LXXLL motif of STAT6. Interacts with STAT3 following IL-6 stimulation. Interacts with the basal transcription factor GTF2B. Interacts with the histone acetyltransferases EP300 and CREBBP. Interacts with PCAF, COPS5, NR3C1 and TTLL5/STAMP. Interacts with PSMB9. Interacts with UBE2L3; they functionally interact to regulate progesterone receptor transcriptional activity. Interacts with PRMT2 and DDX5. Interacts with ASXL1. Interacts with PRMT6. Interacts (via LXXLL 1, 2 and 3 motifs) with RORC (via AF-2 motif). Interacts in a ligand-dependent fashion with RXRA. Interacts with TRIP4. Interacts with NR4A3.
Subcellular Location:	Nucleus
Storage:	Please see kit components below for exact storage details
Note:	For research use only

UniProt Protein Function:	SRC-1: a transcriptional coactivator for steroid and nuclear hormone receptors. A member of the p160/steroid receptor coactivator (SRC) family and like other family members has histone acetyltransferase activity and contains a nuclear localization signal, and bHLH and PAS domains. Phosphorylated and activated via the mitogen-activated protein kinase pathway. Three alternatively spliced isoforms have been described.
UniProt Protein Details:	Protein type:DNA-binding; Acetyltransferase; Oncoprotein; EC 2.3.1.48; Nuclear receptor co-regulator; Transcription, coactivator/corepressor Chromosomal Location of Human Ortholog: 2p23 Cellular Component: nucleoplasm; neuron projection; nuclear chromatin; cytoplasm Molecular Function:ligand-dependent nuclear receptor binding; protein dimerization activity; transcription coactivator activity; protein N-terminus binding; retinoid X receptor binding; signal transducer activity; protein binding; histone acetyltransferase activity; enzyme binding; ligand-dependent nuclear receptor transcription coactivator activity; androgen receptor binding; protein complex binding; estrogen receptor binding; chromatin binding; progesterone receptor binding; nuclear hormone receptor binding Biological Process: lactation; hypothalamus development; positive regulation of transcription from RNA polymerase II promoter by galactose; male mating behavior; intracellular receptor-mediated signaling pathway; response to retinoic acid; transcription, DNA-dependent; positive regulation of apoptosis; positive regulation of transcription, DNA-dependent; male gonad development; hippocampus development; positive regulation of female receptivity; cellular lipid metabolic process; response to estradiol stimulus; cellular response to hormone stimulus; ovulation cycle; androgen receptor signaling pathway; cerebellum development; positive regulation of transcription from RNA polymerase II promoter; cerebral cortex development; positive regulation of neuron differentiation; response to progesterone stimulus
NCBI Summary:	The protein encoded by this gene acts as a transcriptional coactivator for steroid and nuclear hormone receptors. It is a member of the p160/steroid receptor coactivator (SRC) family and like other family members has histone acetyltransferase activity and contains a nuclear localization signal, as well as bHLH and PAS domains. The product of this gene binds nuclear receptors directly and stimulates the transcriptional activities in a hormone-dependent fashion. Alternatively spliced transcript variants encoding different isoforms have been identified. [provided by RefSeq, Jul 2008]
UniProt Code:	Q15788
NCBI GenInfo Identifier:	158518533
NCBI Gene ID:	8648
NCBI Accession:	Q15788.3
UniProt Related Accession:	Q15788
Molecular Weight:
NCBI Full Name:	Nuclear receptor coactivator 1
NCBI Synonym Full Names:	nuclear receptor coactivator 1
NCBI Official Symbol:	NCOA1
NCBI Official Synonym Symbols:	SRC1; KAT13A; RIP160; F-SRC-1; bHLHe42; bHLHe74
NCBI Protein Information:	nuclear receptor coactivator 1
UniProt Protein Name:	Nuclear receptor coactivator 1
UniProt Synonym Protein Names:	Class E basic helix-loop-helix protein 74; bHLHe74; Protein Hin-2; RIP160; Renal carcinoma antigen NY-REN-52; Steroid receptor coactivator 1; SRC-1
Protein Family:	Protein
UniProt Gene Name:	NCOA1
UniProt Entry Name:	NCOA1_HUMAN

Component	Quantity (96 Assays)	Storage
ELISA Microplate (Dismountable)	8×12 strips	-20°C
Lyophilized Standard	2	-20°C
Sample Diluent	20ml	-20°C
Assay Diluent A	10mL	-20°C
Assay Diluent B	10mL	-20°C
Detection Reagent A	120µL	-20°C
Detection Reagent B	120µL	-20°C
Wash Buffer	30mL	4°C
Substrate	10mL	4°C
Stop Solution	10mL	4°C
Plate Sealer	5	-

Other materials and equipment required:

Microplate reader with 450 nm wavelength filter
Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
Incubator
Deionized or distilled water
Absorbent paper
Buffer resevoir

*Note: The below protocol is a sample protocol. Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Allow all reagents to reach room temperature (Please do not dissolve the reagents at 37°C directly). All the reagents should be mixed thoroughly by gently swirling before pipetting. Avoid foaming. Keep appropriate numbers of strips for 1 experiment and remove extra strips from microtiter plate. Removed strips should be resealed and stored at -20°C until the kits expiry date. Prepare all reagents, working standards and samples as directed in the previous sections. Please predict the concentration before assaying. If values for these are not within the range of the standard curve, users must determine the optimal sample dilutions for their experiments. We recommend running all samples in duplicate.

Step
1.	Add Sample: Add 100µL of Standard, Blank, or Sample per well. The blank well is added with Sample diluent. Solutions are added to the bottom of micro ELISA plate well, avoid inside wall touching and foaming as possible. Mix it gently. Cover the plate with sealer we provided. Incubate for 120 minutes at 37°C.
2.	Remove the liquid from each well, don't wash. Add 100µL of Detection Reagent A working solution to each well. Cover with the Plate sealer. Gently tap the plate to ensure thorough mixing. Incubate for 1 hour at 37°C. Note: if Detection Reagent A appears cloudy warm to room temperature until solution is uniform.
3.	Aspirate each well and wash, repeating the process three times. Wash by filling each well with Wash Buffer (approximately 400µL) (a squirt bottle, multi-channel pipette,manifold dispenser or automated washer are needed). Complete removal of liquid at each step is essential. After the last wash, completely remove remaining Wash Buffer by aspirating or decanting. Invert the plate and pat it against thick clean absorbent paper.
4.	Add 100µL of Detection Reagent B working solution to each well. Cover with the Plate sealer. Incubate for 60 minutes at 37°C.
5.	Repeat the wash process for five times as conducted in step 3.
6.	Add 90µL of Substrate Solution to each well. Cover with a new Plate sealer and incubate for 10-20 minutes at 37°C. Protect the plate from light. The reaction time can be shortened or extended according to the actual color change, but this should not exceed more than 30 minutes. When apparent gradient appears in standard wells, user should terminatethe reaction.
7.	Add 50µL of Stop Solution to each well. If color change does not appear uniform, gently tap the plate to ensure thorough mixing.
8.	Determine the optical density (OD value) of each well at once, using a micro-plate reader set to 450 nm. User should open the micro-plate reader in advance, preheat the instrument, and set the testing parameters.
9.	After experiment, store all reagents according to the specified storage temperature respectively until their expiry.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type	Protocol
Serum	If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.
Plasma	Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid	Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatant	Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysates	Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenates	The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysates	Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk	Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.