Product Name:	Human PSEN2 / Presenilin-2 ELISA Kit
Product Code:	HUFI01173
Size:	96 Assays
Alias:	PSEN2, Presenilin-2, PS-2, STM-2, E5-1, AD3LP, AD5, AD4, PSNL2
Detection method:	Sandwich ELISA, Double Antibody
Application:	This immunoassay kit allows for the in vitro quantitative determination of Human PSEN2 concentrations in serum plasma and other biological fluids.
Sensitivity:	9.375pg/ml
Range:	15.625-1000pg/ml
Storage:	4°C for 6 months
Note:	For Research Use Only

Recovery:

Matrices listed below were spiked with certain level of Human PSEN2 and the recovery rates were calculated by comparing the measured value to the expected amount of Human PSEN2 in samples.

Matrix	Recovery range(%)	Average(%)
serum(n=5)	88-95	92
EDTA plasma(n=5)	92-103	98
UFH plasma(n=5)	97-103	99

Linearity:

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human PSEN2 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample	1:2	1:4	1:8
serum(n=5)	85-105%	90-103%	87-105%
EDTA plasma(n=5)	90-93%	83-99%	84-101%
UFH plasma(n=5)	89-95%	82-99%	80-87%

CV(%):

Intra-Assay: CV<8%
Inter-Assay: CV<10%

Component	Quantity	Storage
ELISA Microplate (Dismountable)	8×12 strips	4°C for 6 months
Lyophilized Standard	2	4°C/-20°C
Sample/Standard Dilution Buffer	20ml	4°C
Biotin-labeled Antibody(Concentrated)	120ul	4°C (Protect from light)
Antibody Dilution Buffer	10ml	4°C
HRP-Streptavidin Conjugate(SABC)	120ul	4°C (Protect from light)
SABC Dilution Buffer	10ml	4°C
TMB Substrate	10ml	4°C (Protect from light)
Stop Solution	10ml	4°C
Wash Buffer(25X)	30ml	4°C
Plate Sealer	5	-

Other materials and equipment required:

Microplate reader with 450 nm wavelength filter
Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
Incubator
Deionized or distilled water
Absorbent paper
Buffer resevoir

Uniprot

P49810

UniProt Protein Function:	PSEN2: probable catalytic subunit of the gamma-secretase complex, an endoprotease complex that catalyzes the intramembrane cleavage of integral membrane proteins such as Notch receptors and APP (beta-amyloid precursor protein). An integral membrane protein of the Golgi and endoplasmic reticulum. Requires the other members of the gamma-secretase complex to have a protease activity. May play a role in intracellular signaling and gene expression or in linking chromatin to the nuclear membrane. May function in the cytoplasmic partitioning of proteins. Two alternative splice isoforms have been identified.
UniProt Protein Details:	Protein type:EC 3.4.23.-; Membrane protein, integral; Membrane protein, multi-pass; Cell surface; Protease Chromosomal Location of Human Ortholog: 1q42.13 Cellular Component: Golgi apparatus; centrosome; cell surface; integral to plasma membrane; lysosomal membrane; nuclear inner membrane; cytosol; lipid raft; ciliary rootlet; kinetochore; cell soma; membrane; perinuclear region of cytoplasm; apical plasma membrane; mitochondrial inner membrane; dendritic shaft; neuromuscular junction; endoplasmic reticulum membrane; protein complex; endoplasmic reticulum; cell cortex; Z disc; Golgi membrane; growth cone; axon; plasma membrane Molecular Function:protein binding; endopeptidase activity; aspartic-type endopeptidase activity Biological Process: positive regulation of catalytic activity; axon guidance; nerve growth factor receptor signaling pathway; positive regulation of apoptosis; protein maturation; regulation of synaptic plasticity; positive regulation of coagulation; cell fate specification; T cell receptor signaling pathway; T cell activation during immune response; protein transport; amyloid precursor protein catabolic process; hair follicle development; negative regulation of protein amino acid phosphorylation; beta-amyloid metabolic process; calcium ion transport; forebrain development; ephrin receptor signaling pathway; brain morphogenesis; negative regulation of protein binding; dorsoventral neural tube patterning; embryonic limb morphogenesis; cardiac muscle contraction; Notch signaling pathway; somitogenesis; membrane protein intracellular domain proteolysis; thymus development; regulation of epidermal growth factor receptor activity; membrane protein ectodomain proteolysis; Notch receptor processing; memory; endoplasmic reticulum calcium ion homeostasis; myeloid leukocyte differentiation; response to hypoxia; hemopoietic progenitor cell differentiation; protein processing; negative regulation of protein complex assembly; alveolus development; negative regulation of apoptosis Disease: Alzheimer Disease 4; Cardiomyopathy, Dilated, 1v
NCBI Summary:	Alzheimer's disease (AD) patients with an inherited form of the disease carry mutations in the presenilin proteins (PSEN1 or PSEN2) or the amyloid precursor protein (APP). These disease-linked mutations result in increased production of the longer form of amyloid-beta (main component of amyloid deposits found in AD brains). Presenilins are postulated to regulate APP processing through their effects on gamma-secretase, an enzyme that cleaves APP. Also, it is thought that the presenilins are involved in the cleavage of the Notch receptor such that, they either directly regulate gamma-secretase activity, or themselves act are protease enzymes. Two alternatively spliced transcript variants encoding different isoforms of PSEN2 have been identified. [provided by RefSeq, Jul 2008]
UniProt Code:	P49810
NCBI GenInfo Identifier:	1709858
NCBI Gene ID:	5664
NCBI Accession:	P49810.1
UniProt Secondary Accession:	P49810,Q96P32, A8K8D4, B1AP21,
UniProt Related Accession:	P49810
Molecular Weight:	50,011 Da
NCBI Full Name:	Presenilin-2
NCBI Synonym Full Names:	presenilin 2
NCBI Official Symbol:	PSEN2
NCBI Official Synonym Symbols:	AD4; PS2; AD3L; STM2; CMD1V
NCBI Protein Information:	presenilin-2; AD5; E5-1; PS-2; AD3LP; STM-2; Alzheimer disease 4
UniProt Protein Name:	Presenilin-2
UniProt Synonym Protein Names:	AD3LP; AD5; E5-1; STM-2Cleaved into the following 2 chains:Presenilin-2 NTF subunit; Presenilin-2 CTF subunit
Protein Family:	Presenilin
UniProt Gene Name:	PSEN2
UniProt Entry Name:	PSN2_HUMAN

*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.

Step	Protocol
1.	Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.	Aliquot 0.1ml standard solutions into the standard wells.
3.	Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.	Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.	Seal the plate with a cover and incubate at 37 °C for 90 min.
6.	Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.	Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.	Seal the plate with a cover and incubate at 37°C for 60 min.
9.	Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.	Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.	Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.	Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.	Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14.	Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type	Protocol
Serum	If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.
Plasma	Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid	Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatant	Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysates	Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenates	The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysates	Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk	Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

Illuminating the Multifaceted Role of Acetylation: Bridging Chemistry and Biology Introduction:

Understanding IgA Test: Importance, Procedure, and Interpretation

Biomarker Testing: Advancements, Applications, and Future Directions

Human PSEN2 / Presenilin-2 ELISA Kit

Description