The MN Metanephrine ELISA Kit is specifically designed for the precise measurement of MN Metanephrine levels in biological samples such as urine and plasma. This kit offers superior sensitivity and specificity, guaranteeing accurate and consistent results for various research applications. MN Metanephrine is a metabolite of norepinephrine and epinephrine, hormones produced by the adrenal glands in response to stress.
Elevated levels of MN Metanephrine may indicate conditions such as pheochromocytoma, a rare tumor that affects the adrenal glands. Monitoring MN Metanephrine levels can aid in the early detection and management of such conditions, making this kit an invaluable tool for researchers and healthcare professionals alike.
Product Name:
MN (Metanephrine) ELISA Kit
SKU:
UNFI0063
Reactivity:
Universal
Assay Type:
Competitive ELISA, Coated with Antigen
Sensitivity:
9.375 pg/mL
Range:
15.625-1000 pg/mL
Sample Type:
Serum, Plasma, Cell Culture Supernatant, Cell or Tissue Lysate, Other Liquid Samples
Storage:
2-8°C(Sealed), Don't cryopreserve.
Linearity:
Sample
1:2
1:4
1:8
Serum (n = 10)
86-104%
85-98%
87-103%
EDTA Plasma (n = 10)
88-97%
83-97%
87-97%
Heparin Plasma (n = 10)
85-99%
80-99%
83-98%
Recovery:
Sample
Recovery Range (%)
Average (%)
Serum (n = 10)
87-104
92
EDTA Plasma (n = 10)
85-104
95
Heparin Plasma (n = 10)
93-100
96
Note: The below protocol is a sample protocol. Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Step
Procedure
1
Reagent & Plate Preparation: Equilibrate TMB substrate for 30 minutes at room temperature. Prepare standards, samples (minimum 1:2 dilution), blanks, assign wells, and pre-wash the plate twice.
2
Sample & Biotin-Antibody Binding: Add 50 µL standard or sample followed by 50 µL biotin-labeled antibody to each well. Mix gently and incubate at 37°C for 45 minutes.
3
Washing: Wash the plate 5 times with wash buffer, allowing 1 minute soak time per wash.
4
Color Development: Add TMB substrate and incubate in the dark at 37°C for 10-20 minutes until color develops.
5
Stop Reaction: Add stop solution to terminate the reaction. The color changes from blue to yellow immediately.
6
Reading: Measure absorbance at 450 nm using a microplate reader.
Sample Type
Protocol
Serum
Allow blood to clot, centrifuge at 1000 × g for 20 minutes, collect supernatant and store appropriately.
Plasma
Collect using EDTA anticoagulant, centrifuge at 1000 × g for 15 minutes at 2–8°C and collect plasma.
Cell Culture Supernatant
Centrifuge at 1000 × g for 20 minutes at 4°C and collect clarified supernatant.
Cell Lysate
Lyse cells using recommended lysis buffer with protease inhibitors, centrifuge at 10,000 rpm for 10 minutes, and collect protein supernatant.
Tissue Homogenate
Homogenize tissue in PBS with protease inhibitors, centrifuge at 5000 × g for 5 minutes, and collect supernatant.
Other Sample Types
Centrifuge samples at 1000 × g for 15 minutes at 2–8°C and collect supernatant. For additional guidance, please contact techsupport@assaygenie.com.
Component
Quantity
Storage
48T
96T
ELISA Microplate (Dismountable)
8×6
8×12
Place the test strips into a sealed foil bag with the desiccant. Store for 1 month at 2-8°C; Store for 12 months at -20°C.
Lyophilized Standard
1 vial
2 vial
Place the standards into a sealed foil bag with the desiccant. Store for 1 month at 2-8°C; Store for 12 months at -20°C.
Biotin-labeled Antibody (Lyophilized)
1 vial
1 vial
Place the standards into a sealed foil bag with the desiccant. Store for 1 month at 2-8°C; Store for 12 months at -20°C.
