Human Beclin-1 ELISA Kit
- SKU:
- HUFI00890
- Product Type:
- ELISA Kit
- Size:
- 96 Assays
- Uniprot:
- Q14457
- Sensitivity:
- 0.094ng/ml
- Range:
- 0.156-10ng/ml
- ELISA Type:
- Sandwich
- Synonyms:
- BECN1, Beclin 1, ATG6, GT197, VPS30, ATG6 autophagy related 6 homolog, beclin 1, autophagy related, beclin-1, Coiled-coil myosin-like BCL2-interacting protein, Protein GT197
- Reactivity:
- Human
- Research Area:
- Immunology
Description
Human Beclin-1 ELISA Kit
Beclin-1 is a protein that controls autophagy, a catabolic process induced by starvation. The phosphatidylinositol-3-kinase (PI3K) complex includes this protein, which is involved in vesicle trafficking. Beclin-1 is involved in a number of cellular functions, including tumor progression, neurodegeneration, and apoptosis. Sphingolipidosis and Cervix Carcinoma are examples of diseases linked to BECN1. The Autophagy pathway, as well as Protein Metabolism, are two pathways influenced by Beclin-1.
| Product Name: | Human Beclin-1 ELISA Kit |
| Product Code: | HUFI00890 |
| Size: | 96 Assays |
| Alias: | BECN1, Beclin 1, ATG6, GT197, VPS30, ATG6 autophagy related 6 homolog, beclin 1, autophagy related, beclin-1, Coiled-coil myosin-like BCL2-interacting protein, Protein GT197 |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Human BECN1 concentrations in serum plasma and other biological fluids. |
| Sensitivity: | 0.094ng/ml |
| Range: | 0.156-10ng/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Human BECN1 and the recovery rates were calculated by comparing the measured value to the expected amount of Human BECN1 in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human BECN1 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| Uniprot | Q14457 |
| UniProt Protein Function: | beclin 1: an essential autophagy protein that has been linked to multiple processes including tumor suppression, protection against some cardiac and neurological degenerative diseases, and lifespan extension. A ubiquitous protein of the beclin family. Is part of the class III PI3K complex that induces autophagy. Expressed at elevated levels in dendrites and cell bodies of cerebellar Purkinje cells. Interacts with the anti-apoptotic protein Bcl-2, which inhibits autophagy when it is present in the endoplasmic reticulum. The dissociation of ATG6 from Bcl-2 is essential for its autophagic activity. Interacts with PITC and GluR-delta2. Probably forms a complex with AMBRA1 and PIK3C3. Plays a role in antiviral host defense. Protects against infection by a neurovirulent strain of Sindbis virus. |
| UniProt Protein Details: | Protein type:Adaptor/scaffold; Autophagy; Membrane protein, peripheral Chromosomal Location of Human Ortholog: 17q21 Cellular Component: extrinsic to membrane; mitochondrion; endoplasmic reticulum; cytoplasmic membrane-bound vesicle; dendrite; phagocytic vesicle; trans-Golgi network; nucleus; endosome Molecular Function:protein binding; phosphoinositide 3-kinase binding Biological Process: response to drug; viral reproduction; late endosome to vacuole transport; cytokinesis; CVT pathway; cellular response to nitrogen starvation; negative regulation of cell proliferation; response to vitamin E; lysosome organization and biogenesis; regulation of catalytic activity; beta-amyloid metabolic process; mitochondrion degradation; response to hypoxia; cellular defense response; neuron development; defense response to virus; positive regulation of macroautophagy; positive regulation of autophagy; negative regulation of apoptosis; autophagic vacuole formation |
| NCBI Summary: | Beclin-1 participates in the regulation of autophagy and has an important role in development, tumorigenesis, and neurodegeneration (Zhong et al., 2009 [PubMed 19270693]).[supplied by OMIM, Jul 2010] |
| UniProt Code: | Q14457 |
| NCBI GenInfo Identifier: | 4680381 |
| NCBI Gene ID: | 8678 |
| NCBI Accession: | AAD27650.1 |
| UniProt Secondary Accession: | Q14457,O75595, Q9UNA8, |
| UniProt Related Accession: | Q14457 |
| Molecular Weight: | 51,896 Da |
| NCBI Full Name: | beclin 1 |
| NCBI Synonym Full Names: | beclin 1, autophagy related |
| NCBI Official Symbol: | BECN1 |
| NCBI Official Synonym Symbols: | ATG6; VPS30; beclin1 |
| NCBI Protein Information: | beclin-1; ATG6 autophagy related 6 homolog; coiled-coil myosin-like BCL2-interacting protein; beclin 1 (coiled-coil, moesin-like BCL2 interacting protein); beclin 1 (coiled-coil, moesin-like BCL2-interacting protein) |
| UniProt Protein Name: | Beclin-1 |
| UniProt Synonym Protein Names: | Coiled-coil myosin-like BCL2-interacting protein; Protein GT197 |
| Protein Family: | Beclin |
| UniProt Gene Name: | BECN1 |
| UniProt Entry Name: | BECN1_HUMAN |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
Related Products
