Description
Mitochondrial Extraction Kit
The Mitochondrial Extraction Kit (MAES0254) from Assay Genie isolates mitochondria from animal tissue for research use. The kit uses mechanical homogenization followed by low-speed and high-speed differential centrifugation to separate and purify mitochondria. It supplies lysis, wash, and storage buffers so researchers can obtain mitochondrial preparations for downstream mitochondrial function studies.
The Mitochondrial Extraction Kit (MAES0254) is intended for extracting mitochondria from animal tissue, and its research area is listed as mitochondria. Its separation principle uses mechanical rupture of cells followed by two centrifugation stages. Low-speed differential centrifugation removes debris and large organelles, and high-speed differential centrifugation then yields purified mitochondria. The kit is supplied as three reagents, Lysis Buffer, Mito-Wash Buffer, and Store Buffer, each used at a defined step of this workflow.
Purified mitochondria from animal tissue provide an isolated organelle fraction for downstream research. The workflow is designed to keep the preparation intact: all steps are performed on ice or at 4°C, reagents are pre-cooled, and a glass homogenizer with tight clearance is used for tissue disruption. Tissue is first washed in PBS (0.01 M, pH 7.4) at 2-8°C to remove blood, then ground in pre-cooled Lysis Buffer in an ice bath.
Two low-speed and one high-speed centrifugation steps clear the homogenate before the mitochondrial pellet is washed. After the 15000×g spin, the pellet is resuspended in 0.2 mL of pre-cooled Mito-Wash Buffer and centrifuged at 11000×g for 10 min at 4°C. The final pellet is resuspended in 50-100 µL of pre-cooled Store Buffer. The extract can be used immediately or stored at -70°C, and repeated freeze-thaw cycles should be avoided. Kit reagents are stored at -20°C for 12 months, with Mito-Wash Buffer protected from light.
| Product Name: | Mitochondrial Extraction Kit |
| SKU: | MAES0254 |
| Sample Type: | Animal tissue |
| Research Area: | Mitochondria |
| Method: | Differential centrifugation |
| Storage: | -20°C |
| Shelf Life: | 12 months |
| Detection Principle: | Differential centrifugation |
| Sample Type: | Animal tissue |
| Research Area: | Mitochondria |
| Storage Temperature: | -20°C |
| Shelf Life: | 12 months |
- Isolates mitochondria from animal tissue
- Mechanical homogenization followed by differential centrifugation
- Includes Lysis Buffer, Mito-Wash Buffer, and Store Buffer
- Storage at -20°C for 12 months
- Protocol uses a 5 mL glass homogenizer and pre-cooled reagents on ice
- Research Use Only
Mitochondria are isolated, not quantified, by this kit. Fresh tissue is washed in PBS, homogenized in pre-cooled Lysis Buffer using a glass homogenizer, and cleared of debris and large organelles by low-speed centrifugation (500×g). The supernatant is then centrifuged at 15000×g to pellet mitochondria. A wash step with Mito-Wash Buffer at 11000×g removes contaminants, and the final mitochondrial pellet is resuspended in Store Buffer.
- Isolation of mitochondria from animal tissue for mitochondrial function research
- Preparation of purified mitochondrial fractions for downstream biochemical analysis
- Comparative studies of mitochondrial content across animal tissue samples
| Component | Storage |
| Lysis Buffer | -20°C, 12 months |
| Mito-Wash Buffer | -20°C, 12 months, protect from light |
| Store Buffer | -20°C, 12 months |
- High-speed freezing centrifuge
- 5 mL glass homogenizer with tight clearance
- Pre-cooled 2 mL EP tubes
- Ice or ice water bath
- PBS (0.01 M, pH 7.4)
- Double distilled water
- Absorbent paper
- Scissors
Animal tissue
- Place all reagents in ice water for pre-cooling for at least 15 min after they have returned to the solution state, before use.
- Pre-cool the PBS (0.01 M, pH 7.4), the Lysis Buffer, and the 5 mL glass homogenizer, and perform all steps on ice or at 4°C.
- Weigh 0.05-0.1 g of fresh tissue and wash it with PBS (0.01 M, pH 7.4) at 2-8°C to remove blood.
- Blot the tissue with absorbent paper and cut it into pieces with scissors.
- Place the pieces into the pre-cooled 5 mL glass homogenizer and add 0.5 mL of pre-cooled Lysis Buffer.
- Grind the tissue up and down in an ice bath about 30-40 times.
- Transfer the tissue homogenate to a pre-cooled 2 mL EP tube and centrifuge at 500×g at 4°C for 5 min.
- Transfer the supernatant to a new pre-cooled 2 mL EP tube and centrifuge at 500×g at 4°C for 5 min.
- Transfer the supernatant to a new pre-cooled 2 mL EP tube and centrifuge at 15000×g at 4°C for 15 min.
- Discard the supernatant, resuspend the pellet in 0.2 mL of pre-cooled Mito-Wash Buffer, and centrifuge at 11000×g at 4°C for 10 min.
- Discard the supernatant, resuspend the pellet in 50-100 µL of pre-cooled Store Buffer.
- Use the mitochondrial extract immediately or store it at -70°C, avoiding repeated freeze-thaw.
Reagent preparation
- Place all reagents in ice water for pre-cooling for at least 15 min after they have returned to solution state before use.
- Pre-cool the 5 mL glass homogenizer and 2 mL EP tubes.
Mitochondria extraction
- Weigh 0.05 g to 0.1 g of fresh tissue and wash with PBS (0.01 M, pH 7.4) at 2-8°C to remove blood.
- Blot the tissue with absorbent paper and cut it into pieces with scissors. Place the pieces into the pre-cooled 5 mL glass homogenizer.
- Add 0.5 mL of pre-cooled Lysis Buffer. Grind the tissue up and down in an ice bath for about 30-40 strokes.
- Transfer the homogenate to a pre-cooled 2 mL EP tube and centrifuge at 500×g at 4°C for 5 min.
- Transfer the supernatant to a new pre-cooled 2 mL EP tube and centrifuge at 500×g at 4°C for 5 min.
- Transfer the supernatant to a new pre-cooled 2 mL EP tube and centrifuge at 15000×g at 4°C for 15 min.
- Discard the supernatant. Resuspend the pellet in 0.2 mL of pre-cooled Mito-Wash Buffer and centrifuge at 11000×g at 4°C for 10 min.
- Discard the supernatant. Resuspend the pellet in 50-100 µL of pre-cooled Store Buffer.
Post-extraction handling
- Use the prepared mitochondrial extract immediately, or store it at -70°C.
- Avoid repeated freeze-thaw cycles.
What sample type is this kit validated for?
The kit is intended for extracting mitochondria from animal tissue. The sources list animal tissue as the sample type, and no other sample types are described.
How should the tissue be prepared before extraction?
Weigh 0.05-0.1 g of fresh tissue and wash it with PBS (0.01 M, pH 7.4) at 2-8°C to remove blood. Blot, cut the tissue into pieces, and grind it in 0.5 mL of pre-cooled Lysis Buffer in a pre-cooled 5 mL glass homogenizer for about 30-40 strokes in an ice bath.
How should the kit reagents and the final extract be stored?
Lysis Buffer, Mito-Wash Buffer, and Store Buffer are stored at -20°C for 12 months, and Mito-Wash Buffer should be protected from light. The prepared mitochondrial extract can be used immediately or stored at -70°C, avoiding repeated freeze-thaw.
What centrifugation settings does the protocol use?
The protocol uses 500×g for 5 min at 4°C twice, followed by 15000×g for 15 min at 4°C, and then 11000×g for 10 min at 4°C. A high-speed freezing centrifuge is required.
What key points help avoid problems during extraction?
Keep all steps on ice or at 4°C and pre-cool all reagents for at least 15 min. Use a glass homogenizer with tight clearance, and do not mix reagents from different kits.
| Storage Temperature: | -20°C |
| Shelf Life: | 12 months |
| Light Protection: | Mito-Wash Buffer should be protected from light |
| Prepared Mitochondrial Extract: | Use immediately or store at -70°C; avoid repeated freeze-thaw |
Notes
- Perform all isolation steps on ice or at 4°C, and pre-cool all reagents and tubes before use.
- Use a glass homogenizer with tight clearance.
- Do not mix reagents from different kits.
- Store reagents strictly at the temperatures listed; protect Mito-Wash Buffer from light.
- Avoid repeated freeze-thaw cycles of the prepared mitochondrial extract.
- For Research Use Only. Not for use in diagnostic or therapeutic procedures.