SynonymsSLC12A3,TSC,NCC,Solute Carrier Family 12 Member 3,Sodium/Chloride Transporters,Thiazide-sensitive sodium-chloride cotransporter,Na-Cl symporter
ReactivityHuman
Sample TypeTissue Homogenates, Cell Lysates And Other Biological Fluids
SKU:
HUDL01994
UPC:
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
P55017
Sensitivity:
0.123ng/mL
Range:
0.312-20ng/mL
ELISA Type:
Sandwich
Synonyms:
SLC12A3,TSC,NCC,Solute Carrier Family 12 Member 3,Sodium/Chloride Transporters,Thiazide-sensitive sodium-chloride cotransporter,Na-Cl symporter
Reactivity:
Human
Sample Type:
Tissue Homogenates, Cell Lysates And Other Biological Fluids
The Human Na-Cl Cotransporter (NCCT) ELISA Kit is designed for the precise measurement of Na-Cl cotransporter levels in human samples such as serum, plasma, and cell culture supernatants. This kit offers exceptional sensitivity and specificity, guaranteeing accurate and consistent results for a variety of research purposes.The Na-Cl cotransporter is a key protein involved in regulating sodium and chloride ion transport, playing a crucial role in maintaining electrolyte balance in the body. Dysregulation of this transporter has been implicated in various health conditions such as hypertension, kidney disorders, and electrolyte imbalances.
Therefore, the Na-Cl cotransporter serves as a valuable biomarker for studying these conditions and developing potential therapeutic interventions.With its superior performance and usability, the Human NCCT ELISA Kit is an indispensable tool for researchers and scientists seeking to advance their understanding of sodium-chloride cotransport mechanisms and their implications in human health and disease.
Product Name:
Human Na-Cl Cotransporter (NCCT) ELISA Kit
Product Code:
HUDL01994
Size:
96 Assays
Target:
NCCT
Synonyms:
SLC12A3, TSC, NCC, Solute Carrier Family 12 Member 3,Sodium/Chloride Transporters, Thiazide-sensitive sodium-chloride cotransporter, Na-Cl symporter
Detection Method:
Sandwich
Range:
0.312-20ng/mL
Shelf Life:
12 months
Note:
For research use only
Recovery:
Matrices listed below were spiked with certain level of recombinant the index and the recovery rates were calculated by comparing the measured value to the expected amount of the index in samples.
Matrix
Recovery range (%)
Average(%)
Serum (n=5)
80-102
91
EDTA plasma (n=5)
81-100
90
Heparin plasma (n=5)
80-89
84
Linearity:
The linearity of the kit was assayed by testing samples spiked with appropriate concentration of the index and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample
1:2
1:4
1:8
1:16
Serum (n=5)
82-96%
83-98%
81-99%
93-101%
EDTA plasma (n=5)
88-101%
86-95%
90-102%
80-93%
Heparin plasma (n=5)
80-91%
82-90%
95-104%
79-95%
Intra-assay Precision:
Intra-Assay: CV <10%. 3 samples with low, middle and high level the index were tested 20 times on one plate, respectively.
Inter-assay Precision:
Inter-Assay: CV <12%. 3 samples with low, middle and high level the index were tested on 3 different plates, 8 replicates in each plate.
Stability:
The stability of ELISA kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage conditions. Note: To minimize unnecessary influences on the performance, operation procedures and lab conditions, especially room temperature, air humidity and incubator temperatures should be strictly regulated. It is also strongly suggested that the whole assay is performed by the same experimenter from the beginning to the end.
Step
Protocol
1.
Prepare all reagents, samples and standards
2.
Add 100µL standard or sample to each well. Incubate 2 hours at 37°C
3.
Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C
4.
Aspirate and wash 3 times
5.
Add 100µL prepared Detection Reagent B. Incubate 1 hour at 37°C
6.
Aspirate and wash 5 times
7.
Add 90µL Substrate Solution. Incubate 15-25 minutes at 37°C
8.
Add 50µL Stop Solution. Read at 450nm immediately.
