Human ADAMTS4 (ADAM with Thrombospondin Type 1 Motif 4) CLIA Kit (HUES00199)
- SKU:
- HUES00199
- Product Type:
- ELISA Kit
- ELISA Type:
- CLIA Kit
- Size:
- 96 Assays
- Sensitivity:
- 9.38pg/mL
- Range:
- 15.63-1000pg/mL
- ELISA Type:
- Sandwich
- Synonyms:
- ADAMTS-2, ADAMTS-4, ADMP-1
- Reactivity:
- Human
- Sample Type:
- Serum, plasma and other biological fluids
- Research Area:
- Cell Biology
Description
| Assay type: | Sandwich |
| Format: | 96T |
| Assay time: | 4.5h |
| Reactivity: | Human |
| Detection method: | Chemiluminescence |
| Detection range: | 15.63-1000 pg/mL |
| Sensitivity: | 9.38 pg/mL |
| Sample volume: | 100µL |
| Sample type: | Serum, plasma and other biological fluids |
| Repeatability: | CV < 15% |
| Specificity: | This kit recognizes Human ADAMTS4 in samples. No significant cross-reactivity or interference between Human ADAMTS4 and analogues was observed. |
This kit uses Sandwich-CLIA as the method. The micro CLIA plate provided in this kit has been pre-coated with an antibody specific to Human ADAMTS4. Standards or samples are added to the appropriate micro CLIA plate wells and combined with the specific antibody. Then a biotinylated detection antibody specific for Human ADAMTS4 and Avidin-Horseradish Peroxidase (HRP) conjugate are added to each micro plate well successively and incubated. Free components are washed away. The substrate solution is added to each well. Only those wells that contain Human ADAMTS4, biotinylated detection antibody and Avidin-HRP conjugate will appear fluorescence. The Relative light unit (RLU) value is measured spectrophotometrically by the Chemiluminescence immunoassay analyzer. The RLU value is positively associated with the concentration of Human ADAMTS4. The concentration of Human ADAMTS4 in the samples can be calculated by comparing the RLU of the samples to the standard curve.
| UniProt Protein Function: | ADAMTS4: Cleaves aggrecan, a cartilage proteoglycan, and may be involved in its turnover. May play an important role in the destruction of aggrecan in arthritic diseases. Could also be a critical factor in the exacerbation of neurodegeneration in Alzheimer disease. Cleaves aggrecan at the '392-Glu-|-Ala-393' site. |
| UniProt Protein Details: | Protein type:Motility/polarity/chemotaxis; Secreted, signal peptide; Protease; Secreted; EC 3. 4. 24. 82 Chromosomal Location of Human Ortholog: 1q21-q23 Cellular Component: extracellular matrix; proteinaceous extracellular matrix; extracellular space; extracellular region Molecular Function:peptidase activity; protein binding; protease binding; zinc ion binding; metallopeptidase activity; metalloendopeptidase activity Biological Process: extracellular matrix disassembly; extracellular matrix organization and biogenesis; defense response to bacterium; proteolysis; skeletal development |
| NCBI Summary: | This gene encodes a member of the ADAMTS (a disintegrin and metalloproteinase with thrombospondin motifs) protein family. Members of the family share several distinct protein modules, including a propeptide region, a metalloproteinase domain, a disintegrin-like domain, and a thrombospondin type 1 (TS) motif. Individual members of this family differ in the number of C-terminal TS motifs, and some have unique C-terminal domains. The enzyme encoded by this gene lacks a C-terminal TS motif. It is responsible for the degradation of aggrecan, a major proteoglycan of cartilage, and brevican, a brain-specific extracellular matrix protein. The cleavage of aggrecan and brevican suggests key roles of this enzyme in arthritic disease and in the central nervous system, potentially, in the progression of glioma. [provided by RefSeq, Jul 2008] |
| UniProt Code: | O75173 |
| NCBI GenInfo Identifier: | 317373445 |
| NCBI Gene ID: | 9507 |
| NCBI Accession: | O75173. 3 |
| UniProt Secondary Accession: | O75173,Q5VTW2, Q6P4Q8, Q6UWA8, Q9UN83, |
| UniProt Related Accession: | O75173 |
| Molecular Weight: | 90,197 Da |
| NCBI Full Name: | A disintegrin and metalloproteinase with thrombospondin motifs 4 |
| NCBI Synonym Full Names: | ADAM metallopeptidase with thrombospondin type 1 motif, 4 |
| NCBI Official Symbol: | ADAMTS4 |
| NCBI Official Synonym Symbols: | ADMP-1; ADAMTS-2; ADAMTS-4 |
| NCBI Protein Information: | A disintegrin and metalloproteinase with thrombospondin motifs 4; ADAM-TS4; ADAM-TS 4; aggrecanase-1; a disintegrin-like and metalloprotease (reprolysin type) with thrombospondin type 1 motif, 4 |
| UniProt Protein Name: | A disintegrin and metalloproteinase with thrombospondin motifs 4 |
| UniProt Synonym Protein Names: | ADMP-1; Aggrecanase-1 |
| Protein Family: | A disintegrin and metalloproteinase with thrombospondin motifs |
| UniProt Gene Name: | ADAMTS4 |
| UniProt Entry Name: | ATS4_HUMAN |
As the RLU values of the standard curve may vary according to the conditions of the actual assay performance (e. g. operator, pipetting technique, washing technique or temperature effects), the operator should establish a standard curve for each test. Typical standard curve and data is provided below for reference only.
| Concentration (pg/mL) | RLU | Average | Corrected |
| 1000 | 53312 54038 | 53675 | 53650 |
| 500 | 20812 24166 | 22489 | 22464 |
| 250 | 10849 9573 | 10211 | 10186 |
| 125 | 4868 4934 | 4901 | 4876 |
| 62.5 | 2597 2309 | 2453 | 2428 |
| 31.25 | 1349 1213 | 1281 | 1256 |
| 15.63 | 674 742 | 708 | 683 |
| 0 | 25 25 | 25 | -- |
Precision
Intra-assay Precision (Precision within an assay): 3 samples with low, mid range and high level Human ADAMTS4 were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, mid range and high level Human ADAMTS4 were tested on 3 different plates, 20 replicates in each plate.
| Intra-assay Precision | Inter-assay Precision | |||||
| Sample | 1 | 2 | 3 | 1 | 2 | 3 |
| n | 20 | 20 | 20 | 20 | 20 | 20 |
| Mean (pg/mL) | 47.56 | 133.21 | 498.45 | 44.76 | 134.87 | 472.87 |
| Standard deviation | 4.96 | 10.14 | 51.64 | 4.39 | 15.47 | 52.49 |
| C V (%) | 10.43 | 7.61 | 10.36 | 9.81 | 11.47 | 11.10 |
Recovery
The recovery of Human ADAMTS4 spiked at three different levels in samples throughout the range of the assay was evaluated in various matrices.
| Sample Type | Range (%) | Average Recovery (%) |
| Serum (n=5) | 97-114 | 105 |
| EDTA plasma (n=5) | 87-103 | 94 |
| Cell culture media (n=5) | 90-104 | 95 |
Linearity
Samples were spiked with high concentrations of Human ADAMTS4 and diluted with Reference Standard & Sample Diluent to produce samples with values within the range of the assay.
| Serum (n=5) | EDTA plasma (n=5) | Cell culture media (n=5) | ||
| 1:2 | Range (%) | 91-108 | 90-106 | 88-101 |
| Average (%) | 99 | 97 | 95 | |
| 1:4 | Range (%) | 88-103 | 99-114 | 90-101 |
| Average (%) | 94 | 106 | 96 | |
| 1:8 | Range (%) | 101-115 | 98-113 | 90-105 |
| Average (%) | 109 | 106 | 96 | |
| 1:16 | Range (%) | 96-111 | 99-115 | 98-111 |
| Average (%) | 103 | 105 | 104 |
An unopened kit can be stored at 4°C for 1 month. If the kit is not used within 1 month, store the items separately according to the following conditions once the kit is received.
| Item | Specifications | Storage |
| Micro CLIA Plate(Dismountable) | 8 wells ×12 strips | -20°C, 6 months |
| Reference Standard | 2 vials | |
| Concentrated Biotinylated Detection Ab (100×) | 1 vial, 120 µL | |
| Concentrated HRP Conjugate (100×) | 1 vial, 120 µL | -20°C(shading light), 6 months |
| Reference Standard & Sample Diluent | 1 vial, 20 mL | 4°C, 6 months |
| Biotinylated Detection Ab Diluent | 1 vial, 14 mL | |
| HRP Conjugate Diluent | 1 vial, 14 mL | |
| Concentrated Wash Buffer (25×) | 1 vial, 30 mL | |
| Substrate Reagent A | 1 vial, 5 mL | 4°C (shading light) |
| Substrate Reagent B | 1 vial, 5 mL | 4°C (shading light) |
| Plate Sealer | 5 pieces | |
| Product Description | 1 copy | |
| Certificate of Analysis | 1 copy |
- Set standard, test sample and control (zero) wells on the pre-coated plate and record theirpositions. It is recommended to measure each standard and sample in duplicate. Note: addall solutions to the bottom of the plate wells while avoiding contact with the well walls. Ensuresolutions do not foam when adding to the wells.
- Aliquot 100µl of standard solutions into the standard wells.
- Add 100µl of Sample / Standard dilution buffer into the control (zero) well.
- Add 100µl of properly diluted sample (serum, plasma, tissue homogenates and otherbiological fluids. ) into test sample wells.
- Cover the plate with the sealer provided in the kit and incubate for 90 min at 37°C.
- Aspirate the liquid from each well, do not wash. Immediately add 100µL of BiotinylatedDetection Ab working solution to each well. Cover the plate with a plate seal and gently mix. Incubate for 1 hour at 37°C.
- Aspirate or decant the solution from the plate and add 350µL of wash buffer to each welland incubate for 1-2 minutes at room temperature. Aspirate the solution from each well andclap the plate on absorbent filter paper to dry. Repeat this process 3 times. Note: a microplatewasher can be used in this step and other wash steps.
- Add 100µL of HRP Conjugate working solution to each well. Cover with a plate seal andincubate for 30 min at 37°C.
- Aspirate or decant the solution from each well. Repeat the wash process for five times asconducted in step 7.
- Add 100µL of Substrate mixture solution to each well. Cover with a new plate seal andincubate for no more than 5 min at 37°C. Protect the plate from light.
- Determine the RLU value of each well immediately.
Related Products
Human ADAMTS4 (ADAM with Thrombospondin Type 1 Motif 4) ELISA Kit (HUES01503)
Bovine A disintegrin and metalloproteinase with thrombospondin motifs 4 (ADAMTS4) ELISA Kit
Mouse A disintegrin and metalloproteinase with thrombospondin motifs 4 (Adamts4) ELISA Kit
