The General Bovine Serum Albumin (BSA) ELISA Kit is specifically designed for the accurate and reliable detection of bovine serum albumin levels in various biological samples. This ELISA kit offers high sensitivity and specificity, ensuring precise and reproducible results for research applications.Bovine serum albumin is a commonly used protein in various laboratory applications, including immunology, molecular biology, and biochemistry. It serves as a standard protein for calibration and as a blocking agent in assays, making it an essential component in many experiments.
With the General Bovine Serum Albumin (BSA) ELISA Kit, researchers can effectively quantify and analyze bovine serum albumin levels in serum, plasma, and cell culture supernatants with confidence. This kit provides a convenient and efficient solution for studying protein interactions, assay development, and quality control in the laboratory setting.
Product Name:
General Bovine Serum Albumin (BSA) ELISA Kit
Product Code:
UNDL00016
Size:
96 Assays
Target:
BSA
Synonyms:
Bovine Albumin, Fraction V
Detection Method:
Competition
Range:
0.122-500?g/mL
Shelf Life:
12 months
Note:
For research use only
Recovery:
Matrices listed below were spiked with certain level of recombinant the index and the recovery rates were calculated by comparing the measured value to the expected amount of the index in samples.
Matrix
Recovery range (%)
Average(%)
Serum (n=5)
80-102
91
EDTA plasma (n=5)
81-99
90
Heparin plasma (n=5)
80-89
84
Linearity:
The linearity of the kit was assayed by testing samples spiked with appropriate concentration of the index and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample
1:2
1:4
1:8
1:16
Serum (n=5)
82-96%
83-98%
81-99%
93-101%
EDTA plasma (n=5)
88-101%
86-95%
90-102%
80-93%
Heparin plasma (n=5)
80-91%
82-90%
95-104%
79-95%
Intra-assay Precision:
Intra-Assay: CV <10%. 3 samples with low, middle and high level the index were tested 20 times on one plate, respectively.
Inter-assay Precision:
Inter-Assay: CV <12%. 3 samples with low, middle and high level the index were tested on 3 different plates, 8 replicates in each plate.
Stability:
The stability of ELISA kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition. Note:To minimize unnecessary influences on the performance, operation procedures and lab conditions, especially room temperature, air humidity, and incubator temperatures should be strictly regulated. It is also strongly suggested that the whole assay is performed by the same experimenter from the beginning to the end.
Step
Protocol
1.
Prepare all reagents, samples and standards
2.
Add 50µL standard or sample to each well.    And then add 50µL prepared Detection Reagent A immediately.    Shake and mix. Incubate 1 hour at 37°C
3.
Aspirate and wash 3 times
4.
Add 100µL prepared Detection Reagent B. Incubate 1 hour at 37°C
5.
Aspirate and wash 5 times
6.
Add 90µL Substrate Solution. Incubate 15-25 minutes at 37°C
7.
Add 50µL Stop Solution. Read at 450 nm immediately.
