Description
Human DNM2/Dynamin-2 ELISA Kit
The Human DNM2 (Dynamin 2) ELISA Kit is specifically designed for the precise measurement of dynamin 2 levels in human samples such as serum, plasma, and cell culture supernatants. This kit offers exceptional sensitivity and specificity, ensuring accurate and reproducible results, making it ideal for a wide range of research applications.Dynamin 2 is a key protein involved in membrane dynamics and vesicle formation, playing a crucial role in processes such as endocytosis and cell division.
Dysregulation of dynamin 2 has been linked to various diseases, including cancer, neurological disorders, and muscular dystrophy, making it a valuable biomarker for investigating these conditions and developing potential therapeutic interventions.With the Human DNM2 ELISA Kit, researchers can easily investigate the role of dynamin 2 in disease pathogenesis and progression, ultimately leading to a better understanding of these disorders and the development of novel treatment strategies.
| Product Name: | Human DNM2/Dynamin-2 ELISA Kit |
| Product Code: | HUFI01066 |
| Size: | 96 Assays |
| Alias: | DNM2, Dynamin-2 |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Human DNM2 concentrations in serum plasma and other biological fluids. |
| Sensitivity: | 0.188ng/ml |
| Range: | 0.313-20ng/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Human DNM2 and the recovery rates were calculated by comparing the measured value to the expected amount of Human DNM2 in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human DNM2 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| Uniprot | P50570 |
| UniProt Protein Function: | DYN2: a cytoplasmic microtubule-associated force-producing protein involved in producing microtubule bundles and able to bind and hydrolyze GTP. Most probably involved in vesicular trafficking processes. May mediate the conventional clathrin-mediated uptake of surface receptors. Expressed in the postsynaptic density of neuronal cells. Two alternatively spliced isoforms have been described. |
| UniProt Protein Details: | Protein type:Microtubule-binding; EC 3.6.5.5; Motility/polarity/chemotaxis; Vesicle; Hydrolase Chromosomal Location of Human Ortholog: 19p13.2 Cellular Component: Golgi membrane; Golgi apparatus; postsynaptic membrane; microtubule; growth cone; focal adhesion; postsynaptic density; cytoplasm; plasma membrane; coated pit; midbody; cytosol Molecular Function:GTPase activity; protein binding; enzyme binding; GTP binding; microtubule binding; SH3 domain binding Biological Process: receptor-mediated endocytosis; positive regulation of apoptosis; positive regulation of transcription, DNA-dependent; synaptic vesicle transport; antigen processing and presentation of exogenous peptide antigen via MHC class II; transferrin transport; endocytosis; regulation of axon extension; signal transduction; nitric oxide metabolic process; regulation of transcription, DNA-dependent; receptor internalization; post-Golgi vesicle-mediated transport; regulation of nitric-oxide synthase activity; G2/M transition of mitotic cell cycle; neurite morphogenesis Disease: Lethal Congenital Contracture Syndrome 5; Myopathy, Centronuclear, 1; Charcot-marie-tooth Disease, Dominant Intermediate B |
| NCBI Summary: | Dynamins represent one of the subfamilies of GTP-binding proteins. These proteins share considerable sequence similarity over the N-terminal portion of the molecule, which contains the GTPase domain. Dynamins are associated with microtubules. They have been implicated in cell processes such as endocytosis and cell motility, and in alterations of the membrane that accompany certain activities such as bone resorption by osteoclasts. Dynamins bind many proteins that bind actin and other cytoskeletal proteins. Dynamins can also self-assemble, a process that stimulates GTPase activity. Five alternatively spliced transcripts encoding different proteins have been described. Additional alternatively spliced transcripts may exist, but their full-length nature has not been determined. [provided by RefSeq, Jun 2010] |
| UniProt Code: | P50570 |
| NCBI GenInfo Identifier: | 47117856 |
| NCBI Gene ID: | 1785 |
| NCBI Accession: | P50570.2 |
| UniProt Secondary Accession: | P50570,Q5I0Y0, Q7Z5S3, Q9UPH4, A8K1B6, E7EV30, E9PEQ4 K7ESI9, |
| UniProt Related Accession: | P50570 |
| Molecular Weight: | 870 |
| NCBI Full Name: | Dynamin-2 |
| NCBI Synonym Full Names: | dynamin 2 |
| NCBI Official Symbol: | DNM2 |
| NCBI Official Synonym Symbols: | DYN2; CMT2M; DYNII; LCCS5; CMTDI1; CMTDIB; DI-CMTB |
| NCBI Protein Information: | dynamin-2; dynamin II |
| UniProt Protein Name: | Dynamin-2 |
| Protein Family: | Dynamin |
| UniProt Gene Name: | DNM2 |
| UniProt Entry Name: | DYN2_HUMAN |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
