Description
Human EPRS (glutamyl-prolyl-tRNA synthetase) ELISA Kit
The Human EPRS (Glutamyl-Prolyl tRNA Synthetase) ELISA Kit is a specialized assay designed to accurately measure the levels of EPRS in human samples such as serum, plasma, and cell culture supernatants. This kit offers high sensitivity and specificity, ensuring precise and reproducible results for a variety of research applications.EPRS is a key enzyme involved in protein synthesis, specifically in the charging of tRNA molecules with the amino acids glutamine and proline. Dysregulation of EPRS has been linked to various diseases, including cancer, inflammatory disorders, and neurological conditions.
Therefore, accurate measurement of EPRS levels can provide valuable insights into the pathogenesis of these diseases and aid in the development of potential therapeutic interventions.Overall, the Human EPRS ELISA Kit from Assay Genie offers researchers a reliable tool for studying the role of EPRS in health and disease, with the potential to advance our understanding of molecular mechanisms and identify novel treatment strategies. For more information and to purchase the kit, visit: www.assaygenie.com/human-eprs-glutamyl-prolyl-trna-synthetase-elisa-kit-hufi04413/
| Product Name: | Human EPRS (glutamyl-prolyl-tRNA synthetase) ELISA Kit |
| Product Code: | HUFI04413 |
| Size: | 96 Assays |
| Alias: | EARS ELISA Kit, EPRS ELISA Kit, GLNS ELISA Kit, GLUPRORS ELISA Kit, GluRS Prolyl tRNA synthetase ELISA Kit, Glutamate tRNA ligase ELISA Kit, PARS ELISA Kit, PIG32 ELISA Kit, Proline tRNA ligase ELISA Kit, QARS ELISA Kit, QPRS ELISA Kit |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Human EPRS (glutamyl-prolyl-tRNA synthetase ) concentrations in serum plasma and other biological fluids. |
| Sensitivity: | < 9.375pg/ml |
| Range: | 15.625-1000pg/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Human EPRS (glutamyl-prolyl-tRNA synthetase ) and the recovery rates were calculated by comparing the measured value to the expected amount of Human EPRS (glutamyl-prolyl-tRNA synthetase ) in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human EPRS (glutamyl-prolyl-tRNA synthetase ) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| UniProt Protein Function: | EPRS: Catalyzes the attachment of the cognate amino acid to the corresponding tRNA in a two-step reaction: the amino acid is first activated by ATP to form a covalent intermediate with AMP and is then transferred to the acceptor end of the cognate tRNA. Component of the multisynthetase complex which is comprised of a bifunctional glutamyl-prolyl-tRNA synthetase, the monospecific isoleucyl, leucyl, glutaminyl, methionyl, lysyl, arginyl, and aspartyl-tRNA synthetases as well as three auxiliary proteins, p18, p48 and p43. Interacts with DUS2L. |
| UniProt Protein Details: | Protein type:Translation; EC 6.1.1.17; Ligase; Cofactor and Vitamin Metabolism - porphyrin and chlorophyll; EC 6.1.1.15 Chromosomal Location of Human Ortholog: 1q41 Cellular Component: cytoplasm; cytosol; membrane; ribonucleoprotein complex Molecular Function:glutamate-tRNA ligase activity; GTPase binding; proline-tRNA ligase activity; protein binding Biological Process: negative regulation of translation; prolyl-tRNA aminoacylation; protein complex assembly; tRNA aminoacylation for protein translation |
| NCBI Summary: | Aminoacyl-tRNA synthetases are a class of enzymes that charge tRNAs with their cognate amino acids. The protein encoded by this gene is a multifunctional aminoacyl-tRNA synthetase that catalyzes the aminoacylation of glutamic acid and proline tRNA species. Alternative splicing has been observed for this gene, but the full-length nature and biological validity of the variant have not been determined. [provided by RefSeq, Jul 2008] |
| UniProt Code: | P07814 |
| NCBI GenInfo Identifier: | 288558855 |
| NCBI Gene ID: | 2058 |
| NCBI Accession: | P07814.5 |
| UniProt Secondary Accession: | P07814,Q05BP6, Q05DF8, Q5DSM1, Q5H9S5, Q6PD57, Q86X73 A0AVA9, B9EGH3, |
| UniProt Related Accession: | P07814 |
| Molecular Weight: | 170,591 Da |
| NCBI Full Name: | Bifunctional glutamate/proline--tRNA ligase |
| NCBI Synonym Full Names: | glutamyl-prolyl-tRNA synthetase |
| NCBI Official Symbol: | EPRS |
| NCBI Official Synonym Symbols: | EARS; PARS; QARS; QPRS; PIG32; GLUPRORS |
| NCBI Protein Information: | bifunctional glutamate/proline--tRNA ligase |
| UniProt Protein Name: | Bifunctional glutamate/proline--tRNA ligase |
| UniProt Synonym Protein Names: | Bifunctional aminoacyl-tRNA synthetase; Cell proliferation-inducing gene 32 protein; Glutamatyl-prolyl-tRNA synthetaseIncluding the following 2 domains:Glutamate--tRNA ligase (EC:6.1.1.17)Alternative name(s):Glutamyl-tRNA synthetase; GluRS |
| UniProt Gene Name: | EPRS |
| UniProt Entry Name: | SYEP_HUMAN |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37 °C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37 °C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37 °C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37 °C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
