Description
Human MAP2K7 (Dual specificity mitogen-activated protein kinase kinase 7) ELISA Kit
The Human MAP2K7 (Dual Specificity Mitogen-Activated Protein Kinase Kinase 7) ELISA Kit is a reliable and accurate tool for the detection of MAP2K7 levels in human samples such as serum, plasma, and cell culture supernatants. With its high sensitivity and specificity, this kit guarantees precise and reproducible results, making it suitable for a wide range of research applications.MAP2K7 is a key enzyme in the MAPK signaling pathway, playing a crucial role in various cellular processes such as cell growth, differentiation, and apoptosis.
Dysregulation of MAP2K7 has been linked to various diseases including cancer, inflammatory disorders, and autoimmune diseases, making it a valuable biomarker for studying these conditions and potentially developing targeted therapies.Overall, the Human MAP2K7 ELISA Kit provides researchers with a valuable tool for studying the role of MAP2K7 in disease pathogenesis and identifying potential therapeutic targets.
| Product Name: | Human MAP2K7 (Dual specificity mitogen-activated protein kinase kinase 7) ELISA Kit |
| Product Code: | HUFI08126 |
| Size: | 96 Assays |
| Alias: | Map2k7 ELISA Kit, MAP kinase kinase 7 ELISA Kit, MAPKK 7 ELISA Kit, JNK-activating kinase 2 ELISA Kit, MAPK ELISA Kit, ERK kinase 7 ELISA Kit, MEK 7 ELISA Kit, c-Jun N-terminal kinase kinase 2 ELISA Kit, JNK kinase ELISA Kit |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | This immunoassay kit allows for the in vitro quantitative determination of Human MAP2K7 (Dual specificity mitogen-activated protein kinase kinase 7) concentrations in serum plasma and other biological fluids. |
| Sensitivity: | < 0.188ng/ml |
| Range: | 0.313-20ng/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Human MAP2K7 (Dual specificity mitogen-activated protein kinase kinase 7) and the recovery rates were calculated by comparing the measured value to the expected amount of Human MAP2K7 (Dual specificity mitogen-activated protein kinase kinase 7) in samples. Enquire for more information. |
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human MAP2K7 (Dual specificity mitogen-activated protein kinase kinase 7) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. Enquire for more information. |
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
| Component | Quantity | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | 4°C for 6 months |
| Lyophilized Standard | 2 | 4°C/-20°C |
| Sample/Standard Dilution Buffer | 20ml | 4°C |
| Biotin-labeled Antibody(Concentrated) | 120ul | 4°C (Protect from light) |
| Antibody Dilution Buffer | 10ml | 4°C |
| HRP-Streptavidin Conjugate(SABC) | 120ul | 4°C (Protect from light) |
| SABC Dilution Buffer | 10ml | 4°C |
| TMB Substrate | 10ml | 4°C (Protect from light) |
| Stop Solution | 10ml | 4°C |
| Wash Buffer(25X) | 30ml | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
| UniProt Protein Function: | MKK7: a dual-specificity protein kinase of the STE7 family. Activates JNK1 and -2 by phosphorylating a Thr and a Tyr residue in the activation loop. Is activated by proinflammatory cytokines and environmental stress. Three alternatively spliced isoforms have been reported. |
| UniProt Protein Details: | Protein type:Protein kinase, dual-specificity (non-receptor); EC 2.7.12.2; Protein kinase, STE; Kinase, protein; STE group; STE7 family Chromosomal Location of Human Ortholog: 19p13.3-p13.2 Cellular Component: cytoplasm; intracellular; nucleus; cytosol Molecular Function:MAP kinase kinase activity; protein C-terminus binding; protein serine/threonine kinase activity; protein binding; enzyme binding; protein-tyrosine kinase activity; magnesium ion binding; mitogen-activated protein kinase kinase kinase binding; JUN kinase kinase activity; protein kinase binding; protein phosphatase binding; ATP binding Biological Process: peptidyl-tyrosine phosphorylation; apoptosis; MyD88-independent toll-like receptor signaling pathway; stress-activated MAPK cascade; pathogenesis; toll-like receptor 3 signaling pathway; signal transduction; response to osmotic stress; activation of JNK activity; toll-like receptor 2 signaling pathway; toll-like receptor 10 signaling pathway; toll-like receptor 5 signaling pathway; MyD88-dependent toll-like receptor signaling pathway; response to heat; positive regulation of neuron apoptosis; toll-like receptor signaling pathway; innate immune response; JNK cascade; toll-like receptor 9 signaling pathway; toll-like receptor 4 signaling pathway; response to UV |
| NCBI Summary: | The protein encoded by this gene is a dual specificity protein kinase that belongs to the MAP kinase kinase family. This kinase specifically activates MAPK8/JNK1 and MAPK9/JNK2, and this kinase itself is phosphorylated and activated by MAP kinase kinase kinases including MAP3K1/MEKK1, MAP3K2/MEKK2,MAP3K3/MEKK5, and MAP4K2/GCK. This kinase is involved in the signal transduction mediating the cell responses to proinflammatory cytokines, and environmental stresses. Alternative splicing results in multiple transcript variants. [provided by RefSeq, Jul 2014] |
| UniProt Code: | O14733 |
| NCBI GenInfo Identifier: | 6831583 |
| NCBI Gene ID: | 5609 |
| NCBI Accession: | O14733.2 |
| UniProt Secondary Accession: | O14733,O14648, O14816, O60452, O60453, Q1PG43, Q8IY10 B2R9S5, D6W659, |
| UniProt Related Accession: | O14733 |
| Molecular Weight: | 419 |
| NCBI Full Name: | Dual specificity mitogen-activated protein kinase kinase 7 |
| NCBI Synonym Full Names: | mitogen-activated protein kinase kinase 7 |
| NCBI Official Symbol: | MAP2K7 |
| NCBI Official Synonym Symbols: | MEK; MKK7; JNKK2; MEK 7; MAPKK7; PRKMK7; SAPKK4; SAPKK-4 |
| NCBI Protein Information: | dual specificity mitogen-activated protein kinase kinase 7; SAPK kinase 4; MAPK/ERK kinase 7; MAP kinase kinase 7; JNK-activating kinase 2; c-Jun N-terminal kinase kinase 2; stress-activated protein kinase kinase 4 |
| UniProt Protein Name: | Dual specificity mitogen-activated protein kinase kinase 7 |
| UniProt Synonym Protein Names: | JNK-activating kinase 2; MAPK/ERK kinase 7; MEK 7; Stress-activated protein kinase kinase 4; SAPK kinase 4; SAPKK-4; SAPKK4; c-Jun N-terminal kinase kinase 2; JNK kinase 2; JNKK 2 |
| Protein Family: | Dual specificity mitogen-activated protein kinase kinase |
| UniProt Gene Name: | MAP2K7 |
| UniProt Entry Name: | MP2K7_HUMAN |
*Note: Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37 °C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.
| Step | Protocol |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37 °C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37 °C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37 °C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37 °C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
