Description
Human Protein S100-A1 (S100A1) ELISA Kit
The Human Protein S100 A1 (S100A1) ELISA Kit is a powerful tool for accurately measuring levels of S100A1 in human samples such as serum, plasma, and cell culture supernatants. This ELISA kit offers high sensitivity and specificity, providing precise and reliable results for a variety of research applications.S100A1 is a member of the S100 family of calcium-binding proteins that plays a key role in various cellular processes, including cell cycle regulation, cell differentiation, and intracellular signaling. Dysregulation of S100A1 has been implicated in a range of diseases, including cardiovascular disorders, neurodegenerative diseases, and certain types of cancer.
By accurately measuring S100A1 levels in biological samples, researchers can gain valuable insights into the role of this protein in disease pathogenesis and progression, potentially leading to the development of novel therapeutic strategies. The Human Protein S100 A1 (S100A1) ELISA Kit is an essential tool for any research study focused on understanding the function and significance of S100A1 in human health and disease.
| Product Name: | Human Protein S100-A1 (S100A1) ELISA Kit |
| SKU: | HUEB1618 |
| Size: | 96T |
| Target: | Human Protein S100-A1 (S100A1) |
| Synonyms: | S-100 protein alpha chain, S-100 protein subunit alpha, S100 calcium-binding protein A1, S100A |
| Assay Type: | Sandwich |
| Detection Method: | ELISA |
| Reactivity: | Human |
| Detection Range: | 0.156-10ng/mL |
| Sensitivity: | 0.085ng/ml |
| Intra CV: | 8.1% | ||||||||||||||||||||
| Inter CV: | 10.2% | ||||||||||||||||||||
| Linearity: |
| ||||||||||||||||||||
| Recovery: |
| ||||||||||||||||||||
| Function: | Probably acts as a Ca(2+) signal transducer (PubMed:22399290). In response to an increase in intracellular Ca(2+) levels, binds calcium which triggers a conformational change (PubMed:23351007). This conformational change allows interaction of S1001A with specific target proteins, such as TPR-containing proteins, and the modulation of their activity (PubMed:22399290). |
| Uniprot: | P23297 |
| Sample Type: | Serum, plasma, tissue homogenates, cell culture supernates and other biological fluids |
| Specificity: | Natural and recombinant human Protein S100-A1 |
| Sub Unit: | Dimer of either two alpha chains, or two beta chains, or one alpha and one beta chain (PubMed:21296671). Also forms heterodimers with S100P (PubMed:15171681). Interacts with AGER (By similarity). Interacts with CAPZA1 (By similarity). Interacts with FKBP4 (PubMed:20188096). Interacts with RYR1 and RYR2 (PubMed:18650434). Interacts with CACYBP in a calcium-dependent manner (PubMed:12042313). Interacts with PPP5C (via TPR repeats); the interaction is calcium-dependent and modulates PPP5C activity (PubMed:22399290). |
| Research Area: | Signal Transduction |
| Subcellular Location: | Cytoplasm |
| Storage: | Please see kit components below for exact storage details |
| Note: | For research use only |
| UniProt Protein Function: | Function: Weakly binds calcium but binds zinc very tightly-distinct binding sites with different affinities exist for both ions on each monomer. Physiological concentrations of potassium ion antagonize the binding of both divalent cations, especially affecting high-affinity calcium-binding sites. May mediate calcium-dependent regulation on many physiological processes by interacting with other proteins, such as TPR-containing proteins, and modulating their activity. Ref.13 |
| UniProt Protein Details: | Subunit structure: Dimer of either two alpha chains, or two beta chains, or one alpha and one beta chain. Also forms heterodimers with S100P. Interacts with AGER and CAPZA1. Interacts with FKBP4. Interacts with RYR1 and RYR2. Interacts with CACYBP in a calcium-dependent manner. Interacts with PPP5C (via TPR repeats); the interaction is calcium-dependent and modulates PPP5C activity. Ref.8 Ref.9 Ref.10 Ref.11 Ref.13 Ref.14 Subcellular location: Cytoplasm. Tissue specificity: Highly prevalent in heart. Also found in lesser quantities in skeletal muscle and brain. Sequence similarities: Belongs to the S-100 family.Contains 2 EF-hand domains. |
| NCBI Summary: | The protein encoded by this gene is a member of the S100 family of proteins containing 2 EF-hand calcium-binding motifs. S100 proteins are localized in the cytoplasm and/or nucleus of a wide range of cells, and involved in the regulation of a number of cellular processes such as cell cycle progression and differentiation. S100 genes include at least 13 members which are located as a cluster on chromosome 1q21. This protein may function in stimulation of Ca2+-induced Ca2+ release, inhibition of microtubule assembly, and inhibition of protein kinase C-mediated phosphorylation. Reduced expression of this protein has been implicated in cardiomyopathies. [provided by RefSeq, Jul 2008] |
| UniProt Code: | P23297 |
| NCBI GenInfo Identifier: | 134136 |
| NCBI Gene ID: | 6271 |
| NCBI Accession: | P23297.2 |
| UniProt Secondary Accession: | P23297,Q5T7Y3, B2R5D9, |
| UniProt Related Accession: | P23297 |
| Molecular Weight: | |
| NCBI Full Name: | Protein S100-A1 |
| NCBI Synonym Full Names: | S100 calcium binding protein A1 |
| NCBI Official Symbol: | S100A1 |
| NCBI Official Synonym Symbols: | S100; S100A; S100-alpha |
| NCBI Protein Information: | protein S100-A1; S100 alpha; S-100 protein alpha chain; S-100 protein subunit alpha; S100 calcium-binding protein A1; S100 protein, alpha polypeptide |
| UniProt Protein Name: | Protein S100-A1 |
| UniProt Synonym Protein Names: | S-100 protein alpha chain; S-100 protein subunit alpha; S100 calcium-binding protein A1 |
| UniProt Gene Name: | S100A1 |
| UniProt Entry Name: | S10A1_HUMAN |
| Component | Quantity (96 Assays) | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | -20°C |
| Lyophilized Standard | 2 | -20°C |
| Sample Diluent | 20ml | -20°C |
| Assay Diluent A | 10mL | -20°C |
| Assay Diluent B | 10mL | -20°C |
| Detection Reagent A | 120µL | -20°C |
| Detection Reagent B | 120µL | -20°C |
| Wash Buffer | 30mL | 4°C |
| Substrate | 10mL | 4°C |
| Stop Solution | 10mL | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
*Note: The below protocol is a sample protocol. Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Allow all reagents to reach room temperature (Please do not dissolve the reagents at 37°C directly). All the reagents should be mixed thoroughly by gently swirling before pipetting. Avoid foaming. Keep appropriate numbers of strips for 1 experiment and remove extra strips from microtiter plate. Removed strips should be resealed and stored at -20°C until the kits expiry date. Prepare all reagents, working standards and samples as directed in the previous sections. Please predict the concentration before assaying. If values for these are not within the range of the standard curve, users must determine the optimal sample dilutions for their experiments. We recommend running all samples in duplicate.
| Step | |
| 1. | Add Sample: Add 100µL of Standard, Blank, or Sample per well. The blank well is added with Sample diluent. Solutions are added to the bottom of micro ELISA plate well, avoid inside wall touching and foaming as possible. Mix it gently. Cover the plate with sealer we provided. Incubate for 120 minutes at 37°C. |
| 2. | Remove the liquid from each well, don't wash. Add 100µL of Detection Reagent A working solution to each well. Cover with the Plate sealer. Gently tap the plate to ensure thorough mixing. Incubate for 1 hour at 37°C. Note: if Detection Reagent A appears cloudy warm to room temperature until solution is uniform. |
| 3. | Aspirate each well and wash, repeating the process three times. Wash by filling each well with Wash Buffer (approximately 400µL) (a squirt bottle, multi-channel pipette,manifold dispenser or automated washer are needed). Complete removal of liquid at each step is essential. After the last wash, completely remove remaining Wash Buffer by aspirating or decanting. Invert the plate and pat it against thick clean absorbent paper. |
| 4. | Add 100µL of Detection Reagent B working solution to each well. Cover with the Plate sealer. Incubate for 60 minutes at 37°C. |
| 5. | Repeat the wash process for five times as conducted in step 3. |
| 6. | Add 90µL of Substrate Solution to each well. Cover with a new Plate sealer and incubate for 10-20 minutes at 37°C. Protect the plate from light. The reaction time can be shortened or extended according to the actual color change, but this should not exceed more than 30 minutes. When apparent gradient appears in standard wells, user should terminatethe reaction. |
| 7. | Add 50µL of Stop Solution to each well. If color change does not appear uniform, gently tap the plate to ensure thorough mixing. |
| 8. | Determine the optical density (OD value) of each well at once, using a micro-plate reader set to 450 nm. User should open the micro-plate reader in advance, preheat the instrument, and set the testing parameters. |
| 9. | After experiment, store all reagents according to the specified storage temperature respectively until their expiry. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
