Description
Human SLC16A1 (Monocarboxylate transporter 1) ELISA Kit
The Human SLC16A1 (Monocarboxylate Transporter 1) ELISA Kit is specifically designed for the accurate measurement of SLC16A1 levels in human samples including serum, plasma, and cell culture supernatants. This kit provides high sensitivity and specificity, ensuring precise and reproducible results for a variety of research applications.SLC16A1, also known as monocarboxylate transporter 1, is a key protein involved in the transport of monocarboxylates such as lactate, pyruvate, and ketone bodies across cell membranes. It plays a crucial role in energy metabolism, lactate shuttling, and pH regulation in various tissues.
Dysregulation of SLC16A1 has been implicated in diseases such as cancer, metabolic disorders, and neurological conditions, making it a valuable biomarker for studying these diseases and developing potential therapeutic interventions. Overall, the Human SLC16A1 ELISA Kit provides researchers with a powerful tool for the accurate measurement of SLC16A1 levels, enabling in-depth studies into the role of this transporter in health and disease.
| Product Name: | Human SLC16A1 (Monocarboxylate transporter 1) ELISA Kit |
| Product Code: | AEFI00280 |
| Size: | 96T |
| Alias: | Monocarboxylate transporter 1, MCT 1, Solute carrier family 16 member 1, SLC16A1, MCT1 |
| Detection method: | Sandwich ELISA, Double Antibody |
| Application: | SLC16A1 ELISA Kit allows for the in vitro quantitative determination of SLC16A1 concentrations in serum, plasma, tissue homogenates and other biological fluids. |
| Sensitivity: | < 9.375pg/ml |
| Range: | 15.6-1000pg/ml |
| Storage: | 2-8°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of SLC16A1 and the recovery rates were calculated by comparing the measured value to the expected amount of SLC16A1 in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of SLC16A1 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| CV(%): | Intra-Assay: CV<8% Inter-Assay: CV<10% |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
