Description
Mouse Alpha-1A adrenergic receptor (Adra1a) ELISA Kit
The Mouse Alpha-1A Adrenergic Receptor (ADRA1A) ELISA Kit is a reliable and accurate tool for the detection of ADRA1A levels in mouse serum, plasma, and cell culture supernatants. With its high sensitivity and specificity, this kit delivers precise and reproducible results, making it suitable for a wide range of research applications.The ADRA1A receptor is a key player in the regulation of vascular tone, smooth muscle contraction, and neurotransmitter release, making it a crucial target for studying conditions such as hypertension, heart failure, and neuronal disorders.
By accurately measuring ADRA1A levels, researchers can gain valuable insights into the mechanisms underlying these conditions and develop potential therapeutic interventions.Don't miss out on the opportunity to enhance your research with the Mouse Alpha-1A Adrenergic Receptor (ADRA1A) ELISA Kit. Order yours today from Assay Genie and take your research to the next level.
| Product Name: | Mouse Alpha-1A adrenergic receptor (Adra1a) ELISA Kit |
| SKU: | MOEB1129 |
| Size: | 96T |
| Target: | Mouse Alpha-1A adrenergic receptor (Adra1a) |
| Synonyms: | Alpha-1A adrenoreceptor, Alpha-1C adrenergic receptor, Alpha-1A adrenoceptor, Adra1c |
| Assay Type: | Sandwich |
| Detection Method: | ELISA |
| Reactivity: | Mouse |
| Detection Range: | 0.156-10ng/mL |
| Sensitivity: | 0.086ng/mL |
| Intra CV: | 7.0% | ||||||||||||||||||||
| Inter CV: | 9.2% | ||||||||||||||||||||
| Linearity: |
| ||||||||||||||||||||
| Recovery: |
| ||||||||||||||||||||
| Function: | This alpha-adrenergic receptor mediates its action by association with G proteins that activate a phosphatidylinositol-calcium second messenger system. Its effect is mediated by G(q) and G(11) proteins. Nuclear ADRA1A-ADRA1B heterooligomers regulate phenylephrine (PE)-stimulated ERK signaling in cardiac myocytes. |
| Uniprot: | P97718 |
| Sample Type: | Serum, plasma, tissue homogenates, cell culture supernates and other biological fluids |
| Specificity: | Natural and recombinant mouse Alpha-1A adrenergic receptor |
| Sub Unit: | Homo- and heterooligomer. Heterooligomerizes with ADRA1B homooligomers in cardiac myocytes. |
| Research Area: | Cancer |
| Subcellular Location: | Nucleus membrane Multi-pass membrane protein Cell membrane Multi-pass membrane protein Location at the nuclear membrane facilitates heterooligomerization and regulates ERK-mediated signaling in cardiac myocytes. Colocalizes with GNAQ, PLCB1 as well as LAP2 at the nuclear membrane of cardiac myocytes (By similarity). |
| Storage: | Please see kit components below for exact storage details |
| Note: | For research use only |
| UniProt Protein Function: | ADRA1A: This alpha-adrenergic receptor mediates its action by association with G proteins that activate a phosphatidylinositol- calcium second messenger system. Its effect is mediated by G(q) and G(11) proteins. Nuclear ADRA1A-ADRA1B heterooligomers regulate phenylephrine(PE)-stimulated ERK signaling in cardiac myocytes. Belongs to the G-protein coupled receptor 1 family. Adrenergic receptor subfamily. ADRA1A sub-subfamily. 9 isoforms of the human protein are produced by alternative splicing. |
| UniProt Protein Details: | Protein type:GPCR, family 1; Receptor, GPCR; Membrane protein, integral; Membrane protein, multi-pass Cellular Component: cytosol; integral to membrane; integral to plasma membrane; membrane; nuclear membrane; nucleus; plasma membrane; T-tubule; Z disc Molecular Function:adrenoceptor activity; alpha1-adrenergic receptor activity; G-protein coupled receptor activity; protein heterodimerization activity; signal transducer activity Biological Process: adult heart development; aging; cell growth; cell-cell signaling; elevation of cytosolic calcium ion concentration; G-protein coupled receptor protein signaling pathway; G-protein signaling, coupled to IP3 second messenger (phospholipase C activating); micturition; negative regulation of heart rate in baroreceptor response to increased systemic arterial blood pressure; negative regulation of Rho protein signal transduction; norepinephrine-epinephrine vasoconstriction involved in regulation of systemic arterial blood pressure; organ growth; phospholipase C activation; positive regulation of action potential; positive regulation of heart rate; positive regulation of heart rate by epinephrine-norepinephrine; positive regulation of MAPKKK cascade; positive regulation of smooth muscle contraction; positive regulation of synaptic transmission, GABAergic; positive regulation of systemic arterial blood pressure; positive regulation of the force of heart contraction by epinephrine-norepinephrine; positive regulation of vasoconstriction; regulation of muscle contraction; regulation of vasoconstriction; response to drug; response to hormone stimulus; signal transduction |
| NCBI Summary: | This gene encodes one of several multipass transmembrane proteins that function as G protein-coupled receptors. The encoded protein binds to epinephrine and norepinephrine to mediate signaling in cells of the cardiac, nervous, and other organ systems. Alternatively spliced transcript variants encoding multiple isoforms have been observed for this gene. [provided by RefSeq, Nov 2012] |
| UniProt Code: | P97718 |
| NCBI GenInfo Identifier: | 418203925 |
| NCBI Gene ID: | 11549 |
| NCBI Accession: | NP_001258689.1 |
| UniProt Secondary Accession: | P97718,O54913, Q8BV77, |
| UniProt Related Accession: | P97718 |
| Molecular Weight: | 51,744 Da |
| NCBI Full Name: | alpha-1A adrenergic receptor isoform 1 |
| NCBI Synonym Full Names: | adrenergic receptor, alpha 1a |
| NCBI Official Symbol: | Adra1a |
| NCBI Official Synonym Symbols: | Adra1c |
| NCBI Protein Information: | alpha-1A adrenergic receptor |
| UniProt Protein Name: | Alpha-1A adrenergic receptor |
| UniProt Synonym Protein Names: | Alpha-1A adrenoreceptor; Alpha-1A adrenoceptor; Alpha-1C adrenergic receptor |
| Protein Family: | Alpha-1A adrenergic receptor |
| UniProt Gene Name: | Adra1a |
| UniProt Entry Name: | ADA1A_MOUSE |
| Component | Quantity (96 Assays) | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | -20°C |
| Lyophilized Standard | 2 | -20°C |
| Sample Diluent | 20ml | -20°C |
| Assay Diluent A | 10mL | -20°C |
| Assay Diluent B | 10mL | -20°C |
| Detection Reagent A | 120µL | -20°C |
| Detection Reagent B | 120µL | -20°C |
| Wash Buffer | 30mL | 4°C |
| Substrate | 10mL | 4°C |
| Stop Solution | 10mL | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
*Note: The below protocol is a sample protocol. Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Allow all reagents to reach room temperature (Please do not dissolve the reagents at 37°C directly). All the reagents should be mixed thoroughly by gently swirling before pipetting. Avoid foaming. Keep appropriate numbers of strips for 1 experiment and remove extra strips from microtiter plate. Removed strips should be resealed and stored at -20°C until the kits expiry date. Prepare all reagents, working standards and samples as directed in the previous sections. Please predict the concentration before assaying. If values for these are not within the range of the standard curve, users must determine the optimal sample dilutions for their experiments. We recommend running all samples in duplicate.
| Step | |
| 1. | Add Sample: Add 100µL of Standard, Blank, or Sample per well. The blank well is added with Sample diluent. Solutions are added to the bottom of micro ELISA plate well, avoid inside wall touching and foaming as possible. Mix it gently. Cover the plate with sealer we provided. Incubate for 120 minutes at 37°C. |
| 2. | Remove the liquid from each well, don't wash. Add 100µL of Detection Reagent A working solution to each well. Cover with the Plate sealer. Gently tap the plate to ensure thorough mixing. Incubate for 1 hour at 37°C. Note: if Detection Reagent A appears cloudy warm to room temperature until solution is uniform. |
| 3. | Aspirate each well and wash, repeating the process three times. Wash by filling each well with Wash Buffer (approximately 400µL) (a squirt bottle, multi-channel pipette,manifold dispenser or automated washer are needed). Complete removal of liquid at each step is essential. After the last wash, completely remove remaining Wash Buffer by aspirating or decanting. Invert the plate and pat it against thick clean absorbent paper. |
| 4. | Add 100µL of Detection Reagent B working solution to each well. Cover with the Plate sealer. Incubate for 60 minutes at 37°C. |
| 5. | Repeat the wash process for five times as conducted in step 3. |
| 6. | Add 90µL of Substrate Solution to each well. Cover with a new Plate sealer and incubate for 10-20 minutes at 37°C. Protect the plate from light. The reaction time can be shortened or extended according to the actual color change, but this should not exceed more than 30 minutes. When apparent gradient appears in standard wells, user should terminatethe reaction. |
| 7. | Add 50µL of Stop Solution to each well. If color change does not appear uniform, gently tap the plate to ensure thorough mixing. |
| 8. | Determine the optical density (OD value) of each well at once, using a micro-plate reader set to 450 nm. User should open the micro-plate reader in advance, preheat the instrument, and set the testing parameters. |
| 9. | After experiment, store all reagents according to the specified storage temperature respectively until their expiry. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
