The Mouse Sugar Transporter SWEET1 (SLC50A1) ELISA Kit is a powerful tool for researchers studying the function of this key protein in sugar transport mechanisms in mice. This kit is specifically designed for the accurate and sensitive detection of SWEET1 levels in mouse serum, plasma, and tissue lysates, providing reliable and reproducible results for a wide range of research applications.SWEET1, also known as SLC50A1, is a crucial transporter protein involved in mediating the transport of sugars across cell membranes, playing a vital role in glucose homeostasis and metabolism.
Dysregulation of SWEET1 has been linked to various metabolic disorders and diseases, making it an important target for therapeutic interventions and drug development.With its high sensitivity and specificity, the Mouse Sugar Transporter SWEET1 ELISA Kit offers researchers a valuable tool for studying the function and regulation of SWEET1 in mouse models, advancing our understanding of sugar transport biology and its implications in health and disease.
RAG1-activating protein 1, Solute carrier family 50 member 1, MmSWEET1, Rag1ap1, Rga
Assay Type:
Sandwich
Detection Method:
ELISA
Reactivity:
Mouse
Detection Range:
78-5000pg/ml
Sensitivity:
39.4pg/mL
Intra CV:
6.2%
Inter CV:
8.5%
Linearity:
Sample
1:2
1:4
1:8
1:16
Serum(N=5)
103-113%
109-119%
109-118%
91-100%
EDTA Plasma(N=5)
92-101%
90-100%
88-98%
81-90%
Heparin Plasma(N=5)
89-100%
97-107%
90-102%
107-117%
Recovery:
Sample Type
Average(%)
Recovery Range(%)
Serum
96
90-102
Plasma
98
92-104
Function:
Mediates sugar transport across membranes (By similarity). May regulate the expression of RAG1 a gene involved in V(D)J recombination.
Uniprot:
Q9CXK4
Sample Type:
Serum, plasma, tissue homogenates, cell culture supernates and other biological fluids
Specificity:
Natural and recombinant mouse Sugar transporter SWEET1
Sub Unit:
Interacts with TRPV2; the interaction probably occurs intracellularly and depends on TRPV2 N-glycosylation.
Subcellular Location:
Golgi apparatus membrane Multi-pass membrane protein Cell membrane Multi-pass membrane protein May also localize to the endoplasmic reticulum.
Storage:
Please see kit components below for exact storage details
Note:
For research use only
UniProt Protein Function:
RAG1AP1: Mediates sugar transport across membranes. May stimulate V(D)J recombination by the activation of RAG1. Belongs to the SWEET sugar transporter family. 3 isoforms of the human protein are produced by alternative splicing.Protein type: Membrane protein, multi-pass; Membrane protein, integralCellular Component: endomembrane system; Golgi apparatus; integral to membrane; membrane; nucleus; plasma membraneMolecular Function: glucoside transmembrane transporter activity; sugar transmembrane transporter activityBiological Process: carbohydrate transport; glucoside transport; positive regulation of gene expression, epigenetic; transport
solute carrier family 50 (sugar transporter), member 1
NCBI Official Symbol:
Slc50a1
NCBI Official Synonym Symbols:
Rga; Rag1ap1; MmSWEET1
NCBI Protein Information:
sugar transporter SWEET1
UniProt Protein Name:
Sugar transporter SWEET1
UniProt Synonym Protein Names:
RAG1-activating protein 1; Solute carrier family 50 member 1
Protein Family:
Sugar transporter
UniProt Gene Name:
Slc50a1
UniProt Entry Name:
SWET1_MOUSE
Component
Quantity (96 Assays)
Storage
ELISA Microplate (Dismountable)
8×12 strips
-20°C
Lyophilized Standard
2
-20°C
Sample Diluent
20ml
-20°C
Assay Diluent A
10mL
-20°C
Assay Diluent B
10mL
-20°C
Detection Reagent A
120µL
-20°C
Detection Reagent B
120µL
-20°C
Wash Buffer
30mL
4°C
Substrate
10mL
4°C
Stop Solution
10mL
4°C
Plate Sealer
5
-
Other materials and equipment required:
Microplate reader with 450 nm wavelength filter
Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
Incubator
Deionized or distilled water
Absorbent paper
Buffer resevoir
*Note: The below protocol is a sample protocol. Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Allow all reagents to reach room temperature (Please do not dissolve the reagents at 37°C directly). All the reagents should be mixed thoroughly by gently swirling before pipetting. Avoid foaming. Keep appropriate numbers of strips for 1 experiment and remove extra strips from microtiter plate. Removed strips should be resealed and stored at -20°C until the kits expiry date. Prepare all reagents, working standards and samples as directed in the previous sections. Please predict the concentration before assaying. If values for these are not within the range of the standard curve, users must determine the optimal sample dilutions for their experiments. We recommend running all samples in duplicate.
Step
1.
Add Sample: Add 100µL of Standard, Blank, or Sample per well. The blank well is added with Sample diluent. Solutions are added to the bottom of micro ELISA plate well, avoid inside wall touching and foaming as possible. Mix it gently. Cover the plate with sealer we provided. Incubate for 120 minutes at 37°C.
2.
Remove the liquid from each well, don't wash. Add 100µL of Detection Reagent A working solution to each well. Cover with the Plate sealer. Gently tap the plate to ensure thorough mixing. Incubate for 1 hour at 37°C. Note: if Detection Reagent A appears cloudy warm to room temperature until solution is uniform.
3.
Aspirate each well and wash, repeating the process three times. Wash by filling each well with Wash Buffer (approximately 400µL) (a squirt bottle, multi-channel pipette,manifold dispenser or automated washer are needed). Complete removal of liquid at each step is essential. After the last wash, completely remove remaining Wash Buffer by aspirating or decanting. Invert the plate and pat it against thick clean absorbent paper.
4.
Add 100µL of Detection Reagent B working solution to each well. Cover with the Plate sealer. Incubate for 60 minutes at 37°C.
5.
Repeat the wash process for five times as conducted in step 3.
6.
Add 90µL of Substrate Solution to each well. Cover with a new Plate sealer and incubate for 10-20 minutes at 37°C. Protect the plate from light. The reaction time can be shortened or extended according to the actual color change, but this should not exceed more than 30 minutes. When apparent gradient appears in standard wells, user should terminatethe reaction.
7.
Add 50µL of Stop Solution to each well. If color change does not appear uniform, gently tap the plate to ensure thorough mixing.
8.
Determine the optical density (OD value) of each well at once, using a micro-plate reader set to 450 nm. User should open the micro-plate reader in advance, preheat the instrument, and set the testing parameters.
9.
After experiment, store all reagents according to the specified storage temperature respectively until their expiry.
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
Sample Type
Protocol
Serum
If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.
Plasma
Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid
Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatant
Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysates
Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenates
The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysates
Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk
Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.
