Rat BCL10 ELISA Kit (RTFI00545)

Product Name:	Rat BCL10 ELISA Kit
Product Code:	RTFI00545
Size:	96 Assays
Target:	Rat Bcl10
Alias:	Bcl10, CARMEN, c-E10, CIPER, CLAP, mE10, B-cell CLL, lymphoma 10CIPERCLAPB-cell lymphoma, leukemia 10, Bcl-10, CARD-containing apoptotic signaling protein
Reactivity:	Rat
Detection Method:	Sandwich ELISA, Double Antibody
Sensitivity:	0.094ng/ml
Range:	0.156-10ng/ml
Storage:	4°C for 6 months
Note:	For Research Use Only

Recovery:

Matrices listed below were spiked with certain level of Rat Bcl10 and the recovery rates were calculated by comparing the measured value to the expected amount of Rat Bcl10 in samples.

Matrix	Recovery range(%)	Average(%)
serum(n=5)	90-105	97
EDTA plasma(n=5)	87-99	91
UFH plasma(n=5)	85-100	94

Linearity:

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Rat Bcl10 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample	1:2	1:4	1:8
serum(n=5)	86-102%	90-102%	91-95%
EDTA plasma(n=5)	87-100%	89-99%	82-100%
UFH plasma(n=5)	82-98%	82-93%	83-100%

Intra-Assay:

CV <8%

Inter-Assay:

CV <10%

Uniprot:

Q9QYN5

UniProt Protein Function:	Bcl-10: a ubiquitous pro-apoptotic protein that promotes pro-caspase-9 maturation and activation of NF-kappa-B via NIK and IKK. May be an adapter protein between upstream TNFR1-TRADD-RIP complex and the downstream NIK-IKK-IKAP complex. Self-associates via CARD-CARD interactions; forms a tight complex with MALT1. Interacts with other CARD-proteins such as CARD9, CARD10, CARD11 and CARD14. Binds caspase-9 with its C-terminal domain. Interacts with TRAF2 and BIRC2/c-IAP2. Defects in BCL10 are involved in various types of cancer.
UniProt Protein Details:	Protein type:Apoptosis; Transcription, coactivator/corepressor; Tumor suppressor Chromosomal Location of Human Ortholog: 2q44 Cellular Component: cytoplasm; cytoplasmic microtubule; cytosol; immunological synapse; lipid raft; lipopolysaccharide receptor complex; lysosome; nucleus; perinuclear region of cytoplasm; protein complex; T cell receptor complex Molecular Function:enzyme binding; identical protein binding; kinase activator activity; kinase binding; NF-kappaB binding; protease binding; protein binding; protein C-terminus binding; protein kinase B binding; protein kinase binding; protein self-association; transcription coactivator activity; transcription factor binding; ubiquitin binding; ubiquitin protein ligase binding Biological Process: activation of NF-kappaB transcription factor; adaptive immune response; B cell apoptosis; cell death; cellular defense response; I-kappaB kinase/NF-kappaB cascade; immunoglobulin mediated immune response; innate immune response; negative regulation of mature B cell apoptosis; neural tube closure; positive regulation of apoptosis; positive regulation of caspase activity; positive regulation of I-kappaB kinase/NF-kappaB cascade; positive regulation of interleukin-8 biosynthetic process; positive regulation of phosphorylation; positive regulation of protein ubiquitination; positive regulation of T cell activation; positive regulation of transcription, DNA-dependent; protein heterooligomerization; protein homooligomerization; protein oligomerization; regulation of T cell receptor signaling pathway; response to food; response to fungus; response to molecule of bacterial origin; T cell receptor signaling pathway
UniProt Code:	Q9QYN5
NCBI GenInfo Identifier:	13786152
NCBI Gene ID:	83477
NCBI Accession:	NP_112618.1
UniProt Related Accession:	Q9QYN5
Molecular Weight:	25,999 Da
NCBI Full Name:	B-cell lymphoma/leukemia 10
NCBI Synonym Full Names:	B-cell CLL/lymphoma 10
NCBI Official Symbol:	Bcl10
NCBI Protein Information:	B-cell lymphoma/leukemia 10
UniProt Protein Name:	B-cell lymphoma/leukemia 10
UniProt Synonym Protein Names:	B-cell CLL/lymphoma 10; Bcl-10; R-RCD1; RCD
Protein Family:	B-cell lymphoma/leukemia
UniProt Gene Name:	Bcl10

Step	Procedure
1.	Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.	Aliquot 0.1ml standard solutions into the standard wells.
3.	Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.	Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.	Seal the plate with a cover and incubate at 37°C for 90 min.
6.	Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.	Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.	Seal the plate with a cover and incubate at 37°C for 60 min.
9.	Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.	Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.	Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.	Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.	Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14.	Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type	Protocol
Serum:	If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clotovernight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Removeserum and assay promptly or aliquot and store the samples at-80°C. Avoid multiple freeze-thaw cycles.
Plasma:	Collect plasma using EDTA or heparin as an anti-coagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid:	Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell Culture Supernatant:	Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell Lysates:	Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.
Tissue Homogenates:	The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenizein 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or-80°C.
Tissue Lysates:	Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk:	Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.