Rat Corticotropin-releasing factor receptor 1 (Crhr1) ELISA Kit (RTEB0718)

Product Name:	Rat Corticotropin-releasing factor receptor 1 (Crhr1) ELISA Kit
SKU:	RTEB0718
Size:	96T
Target:	Rat Corticotropin-releasing factor receptor 1 (Crhr1)
Synonyms:	Corticotropin-releasing hormone receptor 1, CRH-R-1, CRF-R-1, Crhr
Assay Type:	Sandwich
Detection Method:	ELISA
Reactivity:	Rat
Detection Range:	0.312-20ng/mL
Sensitivity:	0.163ng/mL

Intra CV:

7.1%

Inter CV:

9.8%

Linearity:

Sample	1:2	1:4	1:8	1:16
Serum(N=5)	81-93%	108-117%	110-120%	104-114%
EDTA Plasma(N=5)	103-113%	98-108%	101-110%	110-120%
Heparin Plasma(N=5)	108-120%	105-114%	87-99%	95-105%

Recovery:

Sample Type	Average(%)	Recovery Range(%)
Serum	100	94-106
Plasma	102	96-108

Function:

G-protein coupled receptor for CRH (corticotropin-releasing factor) and UCN (urocortin). Has high affinity for CRH and UCN. Ligand binding causes a conformation change that triggers signaling via guanine nucleotide-binding proteins (G proteins) and down-stream effectors, such as adenylate cyclase. Promotes the activation of adenylate cyclase, leading to increased intracellular cAMP levels. Inhibits the activity of the calcium channel CACNA1H. Required for normal embryonic development of the adrenal gland and for normal hormonal responses to stress. Plays a role in the response to anxiogenic stimuli.

Uniprot:	P35353
Sample Type:	Serum, plasma, tissue homogenates, cell culture supernates and other biological fluids
Specificity:	Natural and recombinant rat Corticotropin-releasing factor receptor 1
Sub Unit:	Interacts (via N-terminal extracellular domain) with CRH and UCN. Interacts with DLG1; this inhibits endocytosis of CRHR1 after agonist binding (By similarity). Heterodimer; heterodimerizes with GPER1.
Subcellular Location:	Cell membrane Multi-pass membrane protein Endosome Agonist-binding promotes endocytosis.
Storage:	Please see kit components below for exact storage details
Note:	For research use only

UniProt Protein Function:	CRF-R1: a G-protein coupled receptor that specifically binds corticotropin-releasing hormone, a potent mediator of endocrine, autonomic, behavioral, and immune responses to stress. Four splice-variant isoforms have been described.
UniProt Protein Details:	Protein type:GPCR, family 2; Membrane protein, integral; Membrane protein, multi-pass; Receptor, GPCR Chromosomal Location of Human Ortholog: 10q32.1 Cellular Component: apical part of cell; cell soma; dendrite; dendritic spine; integral to membrane; intrinsic to plasma membrane; membrane; multivesicular body; plasma membrane; trans-Golgi network; vesicle Molecular Function:corticotrophin-releasing factor receptor activity; corticotropin-releasing hormone binding; corticotropin-releasing hormone receptor activity; G-protein alpha-subunit binding; G-protein coupled receptor activity; peptide binding; protein binding; protein complex binding Biological Process: adrenal gland development; adrenocorticotropin hormone secretion; behavioral response to cocaine; behavioral response to ethanol; behavioral response to pain; elevation of cytosolic calcium ion concentration; epithelial cell differentiation; fear response; feeding behavior; G-protein signaling, adenylate cyclase activating pathway; G-protein signaling, coupled to cAMP nucleotide second messenger; G-protein signaling, coupled to IP3 second messenger (phospholipase C activating); general adaptation syndrome, behavioral process; hypothalamus development; memory; negative regulation of epinephrine secretion; neuropeptide signaling pathway; positive regulation of cAMP biosynthetic process; positive regulation of mast cell degranulation; regulation of synaptic plasticity; response to electrical stimulus; response to hypoxia; visual learning
NCBI Summary:	This gene encodes a member of the G-protein coupled receptor family. The encoded protein is a receptor for corticotropin-releasing factor (CRH) and urocortin (UCN). The interaction of this protein with CRH and UCN triggers G-protein coupled signaling. This protein plays a pivotal role in mediating the CRH-elicited effects in depression and anxiety. Alternatively spliced transcript variants have been found for this gene. [provided by RefSeq, Sep 2014]
UniProt Code:	P35353
NCBI GenInfo Identifier:	13591892
NCBI Gene ID:	58959
NCBI Accession:	NP_112261.1
UniProt Related Accession:	P35353
Molecular Weight:	47,842 Da
NCBI Full Name:	corticotropin-releasing factor receptor 1 isoform 1
NCBI Synonym Full Names:	corticotropin releasing hormone receptor 1
NCBI Official Symbol:	Crhr1
NCBI Official Synonym Symbols:	CRFR1; CRH-R 1
NCBI Protein Information:	corticotropin-releasing factor receptor 1
UniProt Protein Name:	Corticotropin-releasing factor receptor 1
UniProt Synonym Protein Names:	Corticotropin-releasing hormone receptor 1; CRH-R-1; CRH-R1
Protein Family:	Corticotropin-releasing factor receptor
UniProt Gene Name:	Crhr1

Component	Quantity (96 Assays)	Storage
ELISA Microplate (Dismountable)	8×12 strips	-20°C
Lyophilized Standard	2	-20°C
Sample Diluent	20ml	-20°C
Assay Diluent A	10mL	-20°C
Assay Diluent B	10mL	-20°C
Detection Reagent A	120µL	-20°C
Detection Reagent B	120µL	-20°C
Wash Buffer	30mL	4°C
Substrate	10mL	4°C
Stop Solution	10mL	4°C
Plate Sealer	5	-

Other materials and equipment required:

Microplate reader with 450 nm wavelength filter
Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
Incubator
Deionized or distilled water
Absorbent paper
Buffer resevoir

*Note: The below protocol is a sample protocol. Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.

Allow all reagents to reach room temperature (Please do not dissolve the reagents at 37°C directly). All the reagents should be mixed thoroughly by gently swirling before pipetting. Avoid foaming. Keep appropriate numbers of strips for 1 experiment and remove extra strips from microtiter plate. Removed strips should be resealed and stored at -20°C until the kits expiry date. Prepare all reagents, working standards and samples as directed in the previous sections. Please predict the concentration before assaying. If values for these are not within the range of the standard curve, users must determine the optimal sample dilutions for their experiments. We recommend running all samples in duplicate.

Step
1.	Add Sample: Add 100µL of Standard, Blank, or Sample per well. The blank well is added with Sample diluent. Solutions are added to the bottom of micro ELISA plate well, avoid inside wall touching and foaming as possible. Mix it gently. Cover the plate with sealer we provided. Incubate for 120 minutes at 37°C.
2.	Remove the liquid from each well, don't wash. Add 100µL of Detection Reagent A working solution to each well. Cover with the Plate sealer. Gently tap the plate to ensure thorough mixing. Incubate for 1 hour at 37°C. Note: if Detection Reagent A appears cloudy warm to room temperature until solution is uniform.
3.	Aspirate each well and wash, repeating the process three times. Wash by filling each well with Wash Buffer (approximately 400µL) (a squirt bottle, multi-channel pipette,manifold dispenser or automated washer are needed). Complete removal of liquid at each step is essential. After the last wash, completely remove remaining Wash Buffer by aspirating or decanting. Invert the plate and pat it against thick clean absorbent paper.
4.	Add 100µL of Detection Reagent B working solution to each well. Cover with the Plate sealer. Incubate for 60 minutes at 37°C.
5.	Repeat the wash process for five times as conducted in step 3.
6.	Add 90µL of Substrate Solution to each well. Cover with a new Plate sealer and incubate for 10-20 minutes at 37°C. Protect the plate from light. The reaction time can be shortened or extended according to the actual color change, but this should not exceed more than 30 minutes. When apparent gradient appears in standard wells, user should terminatethe reaction.
7.	Add 50µL of Stop Solution to each well. If color change does not appear uniform, gently tap the plate to ensure thorough mixing.
8.	Determine the optical density (OD value) of each well at once, using a micro-plate reader set to 450 nm. User should open the micro-plate reader in advance, preheat the instrument, and set the testing parameters.
9.	After experiment, store all reagents according to the specified storage temperature respectively until their expiry.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type	Protocol
Serum	If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.
Plasma	Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid	Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatant	Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysates	Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenates	The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysates	Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk	Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.