Description
Rat CPT1A/Carnitine O-palmitoyltransferase 1, liver isoform ELISA Kit
The Rat CPT1A (Carnitine O-Palmitoyltransferase 1, Liver Isoform) ELISA Kit is specially designed for the accurate measurement of CPT1A levels in rat serum, plasma, and cell culture supernatants. With its high sensitivity and specificity, this kit ensures precise and reproducible results, making it perfect for a variety of research purposes.CPT1A is an important enzyme involved in fatty acid metabolism, specifically in the transport of long-chain fatty acids into the mitochondria for beta-oxidation.
Dysregulation of CPT1A has been implicated in metabolic disorders such as obesity, diabetes, and fatty liver disease, making it a valuable target for studying these conditions and potential therapeutic interventions.
| Product Name: | Rat CPT1A/Carnitine O-palmitoyltransferase 1, liver isoform ELISA Kit |
| Product Code: | RTFI00180 |
| Size: | 96 Assays |
| Target: | Rat Cpt1a |
| Alias: | Cpt1a, CPT1-L, Carnitine O-palmitoyltransferase 1, liver isoform, CPT1A, CPT I, CPTI-L, Carnitine palmitoyltransferase 1A |
| Reactivity: | Rat |
| Detection Method: | Sandwich ELISA, Double Antibody |
| Sensitivity: | 9.375pg/ml |
| Range: | 15.625-1000pg/ml |
| Storage: | 4°C for 6 months |
| Note: | For Research Use Only |
| Recovery: | Matrices listed below were spiked with certain level of Rat Cpt1a and the recovery rates were calculated by comparing the measured value to the expected amount of Rat Cpt1a in samples. | ||||||||||||||||
| |||||||||||||||||
| Linearity: | The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Rat Cpt1a and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected. | ||||||||||||||||
| |||||||||||||||||
| Intra-Assay: | CV <8% | ||||||||||||||||
| Inter-Assay: | CV <10% |
| Uniprot: | P32198 |
| UniProt Protein Function: | CPT1A: Belongs to the carnitine/choline acetyltransferase family. 2 isoforms of the human protein are produced by alternative splicing. |
| UniProt Protein Details: | Protein type:Transferase; Lipid Metabolism - fatty acid; Mitochondrial; Membrane protein, multi-pass; Membrane protein, integral; EC 2.3.1.21 Cellular Component: mitochondrial outer membrane; endoplasmic reticulum membrane; intracellular membrane-bound organelle; membrane; mitochondrion; mitochondrial inner membrane; integral to membrane; integral to mitochondrial outer membrane Molecular Function:identical protein binding; protein binding; carnitine O-palmitoyltransferase activity Biological Process: response to drug; eating behavior; glucose metabolic process; long-chain fatty acid metabolic process; response to organic cyclic substance; positive regulation of fatty acid beta-oxidation; fatty acid beta-oxidation; triacylglycerol metabolic process; epithelial cell differentiation; transport; regulation of fatty acid oxidation; regulation of fatty acid beta-oxidation; carnitine metabolic process; regulation of insulin secretion; protein homooligomerization |
| NCBI Summary: | enzyme that catalyses the transfer of long chain fatty acids to carnitine for translocation across the mitochondrial inner membrane [RGD, Feb 2006] |
| UniProt Code: | P32198 |
| NCBI GenInfo Identifier: | 146345405 |
| NCBI Gene ID: | 25757 |
| NCBI Accession: | P32198.2 |
| UniProt Secondary Accession: | P32198,P97780, Q6IMZ4, |
| UniProt Related Accession: | P32198 |
| Molecular Weight: | 88,125 Da |
| NCBI Full Name: | Carnitine O-palmitoyltransferase 1, liver isoform |
| NCBI Synonym Full Names: | carnitine palmitoyltransferase 1a, liver |
| NCBI Official Symbol: | Cpt1a  |
| NCBI Official Synonym Symbols: | CPT-Ia  |
| NCBI Protein Information: | carnitine O-palmitoyltransferase 1, liver isoform; CPT I; CPT1-L; CPTI-L; carnitine palmitoyltransferase 1, liver; carnitine O-palmitoyltransferase I, liver isoform; Carnitine palmitoyltransferase 1 alpha, liver isoform |
| UniProt Protein Name: | Carnitine O-palmitoyltransferase 1, liver isoform |
| UniProt Synonym Protein Names: | Carnitine O-palmitoyltransferase I, liver isoform; CPT I; CPTI-L; Carnitine palmitoyltransferase 1A |
| UniProt Gene Name: | Cpt1a  |
| UniProt Entry Name: | CPT1A_RAT |
| Step | Procedure |
| 1. | Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells! |
| 2. | Aliquot 0.1ml standard solutions into the standard wells. |
| 3. | Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well. |
| 4. | Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells. |
| 5. | Seal the plate with a cover and incubate at 37°C for 90 min. |
| 6. | Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2. |
| 7. | Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall. |
| 8. | Seal the plate with a cover and incubate at 37°C for 60 min. |
| 9. | Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash. |
| 10. | Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min. |
| 11. | Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min. |
| 12. | Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color. |
| 13. | Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately. |
| 14. | Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum: | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clotovernight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Removeserum and assay promptly or aliquot and store the samples at-80°C. Avoid multiple freeze-thaw cycles. |
| Plasma: | Collect plasma using EDTA or heparin as an anti-coagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid: | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell Culture Supernatant: | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell Lysates: | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C. |
| Tissue Homogenates: | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenizein 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or-80°C. |
| Tissue Lysates: | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk: | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
