Rat Muscle, skeletal receptor tyrosine protein kinase (Musk) ELISA Kit
The Rat Muscle Skeletal Receptor Tyrosine Protein Kinase Musk ELISA Kit is a powerful tool for the quantitative measurement of Musk levels in rat tissues and cell culture samples. This kit offers exceptional sensitivity and specificity, guaranteeing precise and consistent results for your research needs.Musk, a receptor tyrosine kinase predominantly found in skeletal muscle, plays a vital role in neuromuscular junction formation and maintenance. Dysregulation of Musk has been implicated in various neuromuscular diseases, making it a valuable target for studies on muscle development, function, and disorders.
With this ELISA kit, researchers can accurately assess Musk levels in rat samples, leading to a better understanding of its functions and potential implications in disease mechanisms. Whether studying muscle biology or investigating neuromuscular conditions, the Rat Muscle Skeletal Receptor Tyrosine Protein Kinase Musk ELISA Kit is an essential tool for advancing your research.
Product Name:
Rat Muscle, skeletal receptor tyrosine protein kinase (Musk) ELISA Kit
SKU:
RTEB0537
Size:
96T
Target:
Rat Muscle, skeletal receptor tyrosine protein kinase (Musk)
Synonyms:
Muscle-specific tyrosine protein kinase receptor, MuSK
Assay Type:
Sandwich
Detection Method:
ELISA
Reactivity:
Rat
Detection Range:
0.156-10ng/mL
Sensitivity:
0.078ng/mL
Intra CV:
Provided with the Kit
Inter CV:
Provided with the Kit
Linearity:
Provided with the Kit
Recovery:
Provided with the Kit
Function:
Receptor tyrosine kinase which plays a central role in the formation and the maintenance of the neuromuscular junction (NMJ), the synapse between the motor neuron and the skeletal muscle (PubMed:23326516). Recruitment of AGRIN by LRP4 to the MUSK signaling complex induces phosphorylation and activation of MUSK, the kinase of the complex. The activation of MUSK in myotubes regulates the formation of NMJs through the regulation of different processes including the specific expression of genes in subsynaptic nuclei, the reorganization of the actin cytoskeleton and the clustering of the acetylcholine receptors (AChR) in the postsynaptic membrane. May regulate AChR phosphorylation and clustering through activation of ABL1 and Src family kinases which in turn regulate MUSK. DVL1 and PAK1 that form a ternary complex with MUSK are also important for MUSK-dependent regulation of AChR clustering. May positively regulate Rho family GTPases through FNTA. Mediates the phosphorylation of FNTA which promotes prenylation, recruitment to membranes and activation of RAC1 a regulator of the actin cytoskeleton and of gene expression. Other effectors of the MUSK signaling include DNAJA3 which functions downstream of MUSK. May also play a role within the central nervous system by mediating cholinergic responses, synaptic plasticity and memory formation.
Uniprot:
Q62838
Sample Type:
Serum, plasma, tissue homogenates, cell culture supernates and other biological fluids
Specificity:
Natural and recombinant rat Muscle, skeletal receptor tyrosine protein kinase
Sub Unit:
Monomer (By similarity). Homodimer (Probable). Interacts with LRP4; the heterodimer forms an AGRIN receptor complex that binds AGRIN resulting in activation of MUSK. Forms a heterotetramer composed of 2 DOK7 and 2 MUSK molecules which facilitates MUSK trans-autophosphorylation on tyrosine residue and activation. Interacts (via cytoplasmic part) with DOK7 (via IRS-type PTB domain); requires MUSK phosphorylation. Interacts with DVL1 (via DEP domain); the interaction is direct and mediates the formation of a DVL1, MUSK and PAK1 ternary complex involved in AChR clustering (By similarity). Interacts with PDZRN3; this interaction is enhanced by agrin (By similarity). Interacts with FNTA; the interaction is direct and mediates AGRIN-induced phosphorylation and activation of FNTA (By similarity). Interacts with CSNK2B; mediates regulation by CK2 (By similarity). Interacts (via the cytoplasmic domain) with DNAJA3. Interacts with NSF; may regulate MUSK endocytosis and activity (By similarity). Interacts with CAV3; may regulate MUSK signaling (By similarity). Interacts with RNF31 (By similarity). Interacts with DOK7 (PubMed:23326516).
Research Area:
Signal Transduction
Subcellular Location:
Cell junction Synapse Postsynaptic cell membrane Single-pass type I membrane protein Localizes to the postsynaptic cell membrane of the neuromuscular junction.
Storage:
Please see kit components below for exact storage details
Note:
For research use only
UniProt Protein Function:
MUSK: a receptor tyrosine kinase that is essential for the establishment and maintenance of the neuromuscular junction (NMJ). Its activation by agrin, a neuronally derived heparan-sulfate proteoglycan, and the agrin receptor (LRP4), leads to clustering of acetylcholine receptors on the postsynaptic side of the NMJ. Its activation by agrin requires Dok7, which interacts with the cytoplasmic portion of MuSK and activates its tyrosine kinase activity.Protein type: Protein kinase, TK; Protein kinase, tyrosine (receptor); EC 2.7.10.1; Membrane protein, integral; Kinase, protein; TK group; Musk family
UniProt Protein Details:
NCBI Summary:
receptor tyrosine kinase expressed in myotomes, developing muscle and localized to the neuromuscular junction in the adult; expression is induced in response to injury or immobilization [RGD, Feb 2006]
Muscle-specific tyrosine protein kinase receptor; MuSK; Muscle-specific kinase receptor
Protein Family:
Muscle, skeletal receptor tyrosine protein kinase
UniProt Gene Name:
Musk
UniProt Entry Name:
MUSK_RAT
Component
Quantity (96 Assays)
Storage
ELISA Microplate (Dismountable)
8×12 strips
-20°C
Lyophilized Standard
2
-20°C
Sample Diluent
20ml
-20°C
Assay Diluent A
10mL
-20°C
Assay Diluent B
10mL
-20°C
Detection Reagent A
120µL
-20°C
Detection Reagent B
120µL
-20°C
Wash Buffer
30mL
4°C
Substrate
10mL
4°C
Stop Solution
10mL
4°C
Plate Sealer
5
-
Other materials and equipment required:
Microplate reader with 450 nm wavelength filter
Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
Incubator
Deionized or distilled water
Absorbent paper
Buffer resevoir
*Note: The below protocol is a sample protocol. Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Allow all reagents to reach room temperature (Please do not dissolve the reagents at 37°C directly). All the reagents should be mixed thoroughly by gently swirling before pipetting. Avoid foaming. Keep appropriate numbers of strips for 1 experiment and remove extra strips from microtiter plate. Removed strips should be resealed and stored at -20°C until the kits expiry date. Prepare all reagents, working standards and samples as directed in the previous sections. Please predict the concentration before assaying. If values for these are not within the range of the standard curve, users must determine the optimal sample dilutions for their experiments. We recommend running all samples in duplicate.
Step
1.
Add Sample: Add 100µL of Standard, Blank, or Sample per well. The blank well is added with Sample diluent. Solutions are added to the bottom of micro ELISA plate well, avoid inside wall touching and foaming as possible. Mix it gently. Cover the plate with sealer we provided. Incubate for 120 minutes at 37°C.
2.
Remove the liquid from each well, don't wash. Add 100µL of Detection Reagent A working solution to each well. Cover with the Plate sealer. Gently tap the plate to ensure thorough mixing. Incubate for 1 hour at 37°C. Note: if Detection Reagent A appears cloudy warm to room temperature until solution is uniform.
3.
Aspirate each well and wash, repeating the process three times. Wash by filling each well with Wash Buffer (approximately 400µL) (a squirt bottle, multi-channel pipette,manifold dispenser or automated washer are needed). Complete removal of liquid at each step is essential. After the last wash, completely remove remaining Wash Buffer by aspirating or decanting. Invert the plate and pat it against thick clean absorbent paper.
4.
Add 100µL of Detection Reagent B working solution to each well. Cover with the Plate sealer. Incubate for 60 minutes at 37°C.
5.
Repeat the wash process for five times as conducted in step 3.
6.
Add 90µL of Substrate Solution to each well. Cover with a new Plate sealer and incubate for 10-20 minutes at 37°C. Protect the plate from light. The reaction time can be shortened or extended according to the actual color change, but this should not exceed more than 30 minutes. When apparent gradient appears in standard wells, user should terminatethe reaction.
7.
Add 50µL of Stop Solution to each well. If color change does not appear uniform, gently tap the plate to ensure thorough mixing.
8.
Determine the optical density (OD value) of each well at once, using a micro-plate reader set to 450 nm. User should open the micro-plate reader in advance, preheat the instrument, and set the testing parameters.
9.
After experiment, store all reagents according to the specified storage temperature respectively until their expiry.
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
Sample Type
Protocol
Serum
If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.
Plasma
Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid
Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell culture supernatant
Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell lysates
Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Tissue homogenates
The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.
Tissue lysates
Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk
Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.
