Rat NOTCH2 ELISA Kit (RTFI00503)

Product Name:	Rat NOTCH2 ELISA Kit
Product Code:	RTFI00503
Size:	96 Assays
Target:	Rat Notch2
Alias:	Notch2, AGS2, hN2, neurogenic locus notch homolog protein 2, Notch, Drosophila homolog 2, notch 2Notch homolog 2, Drosophila, Notch homolog 2
Reactivity:	Rat
Detection Method:	Sandwich ELISA, Double Antibody
Sensitivity:	0.094ng/ml
Range:	0.156-10ng/ml
Storage:	4°C for 6 months
Note:	For Research Use Only

Recovery:

Matrices listed below were spiked with certain level of Rat Notch2 and the recovery rates were calculated by comparing the measured value to the expected amount of Rat Notch2 in samples.

Matrix	Recovery range(%)	Average(%)
serum(n=5)	92-101	95
EDTA plasma(n=5)	85-103	96
UFH plasma(n=5)	86-100	94

Linearity:

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Rat Notch2 and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample	1:2	1:4	1:8
serum(n=5)	88-102%	85-104%	90-102%
EDTA plasma(n=5)	86-97%	86-99%	87-100%
UFH plasma(n=5)	81-87%	85-100%	80-89%

Intra-Assay:

CV <8%

Inter-Assay:

CV <10%

Uniprot:

Q9QW30

UniProt Protein Function:	Notch 2: a member of the Notch family. Notch family members play a role in a variety of developmental processes by controlling cell fate decisions. The Notch signaling network is an evolutionarily conserved intercellular signaling pathway which regulates interactions between physically adjacent cells. Affects the implementation of differentiation, proliferation and apoptotic programs. Cleaved in the trans-Golgi network and presented on the cell surface as a heterodimer. This protein functions as a receptor for the membrane bound ligands Jagged1, Jagged2 and Delta1 to regulate cell-fate determination. Upon ligand activation through the released notch intracellular domain (NICD) it forms a transcriptional activator complex with RBP-J kappa and activates genes of the enhancer of split locus.
UniProt Protein Details:	Protein type:Membrane protein, integral; Motility/polarity/chemotaxis; Receptor, misc. Cellular Component: cell surface; cilium; cytosol; extracellular region; integral to plasma membrane; membrane; nucleoplasm; nucleus; plasma membrane; receptor complex Molecular Function:calcium ion binding; enzyme binding; NF-kappaB binding; receptor activity Biological Process: bone remodeling; cell cycle arrest; cell fate determination; cell growth; defense response to bacterium; determination of left/right symmetry; embryonic limb morphogenesis; heart looping; humoral immune response; in utero embryonic development; inflammatory response to antigenic stimulus; liver development; marginal zone B cell differentiation; morphogenesis of an epithelial sheet; multicellular organism growth; myeloid dendritic cell differentiation; negative regulation of cell proliferation; negative regulation of transcription from RNA polymerase II promoter; Notch signaling pathway; organ morphogenesis; placenta development; positive regulation of apoptosis; positive regulation of BMP signaling pathway; positive regulation of cell proliferation; positive regulation of osteoclast differentiation; positive regulation of Ras protein signal transduction; regulation of developmental process; regulation of transcription from RNA polymerase II promoter; regulation of transcription, DNA-dependent; tissue regeneration; transcription, DNA-dependent; wound healing
NCBI Summary:	transmembrane protein that may be involved in cellular interactions that specify cell fate [RGD, Feb 2006]
UniProt Code:	Q9QW30
NCBI GenInfo Identifier:	20138817
NCBI Gene ID:	29492
NCBI Accession:	Q9QW30.1
UniProt Related Accession:	Q9QW30
Molecular Weight:	265,370 Da
NCBI Full Name:	Neurogenic locus notch homolog protein 2
NCBI Synonym Full Names:	notch 2
NCBI Official Symbol:	Notch2
NCBI Protein Information:	neurogenic locus notch homolog protein 2
UniProt Protein Name:	Neurogenic locus notch homolog protein 2
Protein Family:	Neurogenic locus notch homolog protein
UniProt Gene Name:	Notch2
UniProt Entry Name:	NOTC2_RAT

Step	Procedure
1.	Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!
2.	Aliquot 0.1ml standard solutions into the standard wells.
3.	Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.
4.	Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.
5.	Seal the plate with a cover and incubate at 37°C for 90 min.
6.	Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.
7.	Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.
8.	Seal the plate with a cover and incubate at 37°C for 60 min.
9.	Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.
10.	Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.
11.	Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.
12.	Add 90 µL of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.
13.	Add 50 µL of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.
14.	Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type	Protocol
Serum:	If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clotovernight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Removeserum and assay promptly or aliquot and store the samples at-80°C. Avoid multiple freeze-thaw cycles.
Plasma:	Collect plasma using EDTA or heparin as an anti-coagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.Note: Over haemolysed samples are not suitable for use with this kit.
Urine & Cerebrospinal Fluid:	Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.
Cell Culture Supernatant:	Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.
Cell Lysates:	Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20°C.
Tissue Homogenates:	The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenizein 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or-80°C.
Tissue Lysates:	Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.
Breast Milk:	Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.