Description
Rat Sarcoplasmic/endoplasmic reticulum calcium ATPase 1 (Atp2a1) ELISA Kit
The Rat Sarcoplasmic/Endoplasmic Reticulum Calcium ATPase 1 (ATP2A1) ELISA Kit is a powerful tool for quantifying levels of ATP2A1 in rat samples including serum, plasma, and cell culture supernatants. This kit boasts exceptional sensitivity and specificity, delivering accurate and consistent results for a variety of research applications.ATP2A1 plays a crucial role in calcium ion transport and regulation within cells, particularly in muscle tissue. Dysregulation of ATP2A1 function has been linked to various diseases, including heart failure and skeletal muscle disorders.
Therefore, measuring ATP2A1 levels can provide valuable insights into the pathogenesis of these conditions and aid in the development of potential therapeutic interventions.Overall, the Rat Sarcoplasmic/Endoplasmic Reticulum Calcium ATPase 1 (ATP2A1) ELISA Kit offers researchers a reliable and efficient method for studying ATP2A1 biology and its implications in health and disease.
| Product Name: | Rat Sarcoplasmic/endoplasmic reticulum calcium ATPase 1 (Atp2a1) ELISA Kit |
| SKU: | RTEB1040 |
| Size: | 96T |
| Target: | Rat Sarcoplasmic/endoplasmic reticulum calcium ATPase 1 (Atp2a1) |
| Synonyms: | Calcium pump 1, Calcium-transporting ATPase sarcoplasmic reticulum type, fast twitch skeletal muscle isoform, Endoplasmic reticulum class 1/2 Ca(2+) ATPase, SERCA1 |
| Assay Type: | Competitive |
| Detection Method: | ELISA |
| Reactivity: | Rat |
| Detection Range: | 0.312-20ng/mL |
| Sensitivity: | 0.156ng/mL |
| Intra CV: | 4.9% | ||||||||||||||||||||
| Inter CV: | 8.1% | ||||||||||||||||||||
| Linearity: |
| ||||||||||||||||||||
| Recovery: |
| ||||||||||||||||||||
| Function: | Key regulator of striated muscle performance by acting as the major Ca(2+) ATPase responsible for the reuptake of cytosolic Ca(2+) into the sarcoplasmic reticulum. Catalyzes the hydrolysis of ATP coupled with the translocation of calcium from the cytosol to the sarcoplasmic reticulum lumen. Contributes to calcium sequestration involved in muscular excitation/contraction. |
| Uniprot: | Q64578 |
| Sample Type: | Serum, plasma, tissue homogenates, cell culture supernates and other biological fluids |
| Specificity: | Natural and recombinant rat Sarcoplasmic/endoplasmic reticulum calcium ATPase 1 |
| Sub Unit: | Interacts with sarcolipin (SLN) (By similarity). Interacts with phospholamban (PLN) (By similarity). Interacts with myoregulin (MRLN). Interacts with DWORF. |
| Research Area: | Neurosciences |
| Subcellular Location: | Endoplasmic reticulum membrane Multi-pass membrane protein Sarcoplasmic reticulum membrane Multi-pass membrane protein |
| Storage: | Please see kit components below for exact storage details |
| Note: | For research use only |
| UniProt Protein Function: | ATP2A1: This magnesium-dependent enzyme catalyzes the hydrolysis of ATP coupled with the translocation of calcium from the cytosol to the sarcoplasmic reticulum lumen. Contributes to calcium sequestration involved in muscular excitation/contraction. Associated with sarcolipin (SLN) and phospholamban (PLN). Increased contractile activity leads to a decrease in SERCA1 expression, while decreased contractile activity leads to an increase in SERCA1 expression. Skeletal muscle, fast twitch muscle (type II) fibers. Reversibly inhibited by phospholamban (PLN) at low calcium concentrations. Dephosphorylated PLN decreases the apparent affinity of the ATPase for calcium. This inhibition is regulated by the phosphorylation of PLN. Belongs to the cation transport ATPase (P-type) (TC 3.A.3) family. Type IIA subfamily. 2 isoforms of the human protein are produced by alternative splicing. |
| UniProt Protein Details: | Protein type:EC 3.6.3.8; Transporter, ion channel; Endoplasmic reticulum; Hydrolase; Membrane protein, multi-pass; Transporter; Membrane protein, integral Chromosomal Location of Human Ortholog: 16p12.1 Cellular Component: I band; endoplasmic reticulum membrane; sarcoplasmic reticulum membrane; membrane; sarcoplasmic reticulum; perinuclear region of cytoplasm; integral to membrane; ER-Golgi intermediate compartment Molecular Function:protein binding; protein homodimerization activity; calcium-transporting ATPase activity; calcium ion binding; ATP binding Biological Process: apoptotic mitochondrial changes; positive regulation of fast-twitch skeletal muscle contraction; maintenance of mitochondrion localization; metabolic process; reduction of endoplasmic reticulum calcium ion concentration; elevation of endoplasmic reticulum calcium ion concentration; calcium ion transport; regulation of striated muscle contraction; blood coagulation; transmembrane transport; elevation of mitochondrial calcium ion concentration; negative regulation of striated muscle contraction Disease: Brody Myopathy |
| NCBI Summary: | This gene encodes one of the SERCA Ca(2+)-ATPases, which are intracellular pumps located in the sarcoplasmic or endoplasmic reticula of muscle cells. This enzyme catalyzes the hydrolysis of ATP coupled with the translocation of calcium from the cytosol to the sarcoplasmic reticulum lumen, and is involved in muscular excitation and contraction. Mutations in this gene cause some autosomal recessive forms of Brody disease, characterized by increasing impairment of muscular relaxation during exercise. Alternative splicing results in three transcript variants encoding different isoforms. [provided by RefSeq, Oct 2013] |
| UniProt Code: | Q64578 |
| NCBI GenInfo Identifier: | 554506571 |
| NCBI Gene ID: | 487 |
| NCBI Accession: | NP_001273004.1 |
| UniProt Secondary Accession: | Q64578,O14984, A8K5J9, B3KY17, |
| UniProt Related Accession: | O14983 |
| Molecular Weight: | 95,199 Da |
| NCBI Full Name: | sarcoplasmic/endoplasmic reticulum calcium ATPase 1 isoform c |
| NCBI Synonym Full Names: | ATPase, Ca++ transporting, cardiac muscle, fast twitch 1 |
| NCBI Official Symbol: | ATP2A1 |
| NCBI Official Synonym Symbols: | ATP2A; SERCA1 |
| NCBI Protein Information: | sarcoplasmic/endoplasmic reticulum calcium ATPase 1; calcium pump 1; SR Ca(2+)-ATPase 1; endoplasmic reticulum class 1/2 Ca(2+) ATPase; calcium-transporting ATPase sarcoplasmic reticulum type, fast twitch skeletal muscle isoform |
| UniProt Protein Name: | Sarcoplasmic/endoplasmic reticulum calcium ATPase 1 |
| UniProt Synonym Protein Names: | Calcium pump 1; Calcium-transporting ATPase sarcoplasmic reticulum type, fast twitch skeletal muscle isoform; Endoplasmic reticulum class 1/2 Ca(2+) ATPase |
| Protein Family: | Sarcoplasmic/endoplasmic reticulum calcium ATPase |
| UniProt Gene Name: | ATP2A1 |
| UniProt Entry Name: | AT2A1_HUMAN |
| Component | Quantity (96 Assays) | Storage |
| ELISA Microplate (Dismountable) | 8×12 strips | -20°C |
| Lyophilized Standard | 2 | -20°C |
| Sample Diluent | 20ml | -20°C |
| Assay Diluent A | 10mL | -20°C |
| Assay Diluent B | 10mL | -20°C |
| Detection Reagent A | 120µL | -20°C |
| Detection Reagent B | 120µL | -20°C |
| Wash Buffer | 30mL | 4°C |
| Substrate | 10mL | 4°C |
| Stop Solution | 10mL | 4°C |
| Plate Sealer | 5 | - |
Other materials and equipment required:
- Microplate reader with 450 nm wavelength filter
- Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
- Incubator
- Deionized or distilled water
- Absorbent paper
- Buffer resevoir
*Note: The below protocol is a sample protocol. Protocols are specific to each batch/lot. For the correct instructions please follow the protocol included in your kit.
Allow all reagents to reach room temperature (Please do not dissolve the reagents at 37°C directly). All the reagents should be mixed thoroughly by gently swirling before pipetting. Avoid foaming. Keep appropriate numbers of strips for 1 experiment and remove extra strips from microtiter plate. Removed strips should be resealed and stored at -20°C until the kits expiry date. Prepare all reagents, working standards and samples as directed in the previous sections. Please predict the concentration before assaying. If values for these are not within the range of the standard curve, users must determine the optimal sample dilutions for their experiments. We recommend running all samples in duplicate.
| Step | |
| 1. | Add Sample: Add 100µL of Standard, Blank, or Sample per well. The blank well is added with Sample diluent. Solutions are added to the bottom of micro ELISA plate well, avoid inside wall touching and foaming as possible. Mix it gently. Cover the plate with sealer we provided. Incubate for 120 minutes at 37°C. |
| 2. | Remove the liquid from each well, don't wash. Add 100µL of Detection Reagent A working solution to each well. Cover with the Plate sealer. Gently tap the plate to ensure thorough mixing. Incubate for 1 hour at 37°C. Note: if Detection Reagent A appears cloudy warm to room temperature until solution is uniform. |
| 3. | Aspirate each well and wash, repeating the process three times. Wash by filling each well with Wash Buffer (approximately 400µL) (a squirt bottle, multi-channel pipette,manifold dispenser or automated washer are needed). Complete removal of liquid at each step is essential. After the last wash, completely remove remaining Wash Buffer by aspirating or decanting. Invert the plate and pat it against thick clean absorbent paper. |
| 4. | Add 100µL of Detection Reagent B working solution to each well. Cover with the Plate sealer. Incubate for 60 minutes at 37°C. |
| 5. | Repeat the wash process for five times as conducted in step 3. |
| 6. | Add 90µL of Substrate Solution to each well. Cover with a new Plate sealer and incubate for 10-20 minutes at 37°C. Protect the plate from light. The reaction time can be shortened or extended according to the actual color change, but this should not exceed more than 30 minutes. When apparent gradient appears in standard wells, user should terminatethe reaction. |
| 7. | Add 50µL of Stop Solution to each well. If color change does not appear uniform, gently tap the plate to ensure thorough mixing. |
| 8. | Determine the optical density (OD value) of each well at once, using a micro-plate reader set to 450 nm. User should open the micro-plate reader in advance, preheat the instrument, and set the testing parameters. |
| 9. | After experiment, store all reagents according to the specified storage temperature respectively until their expiry. |
When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.
| Sample Type | Protocol |
| Serum | If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. |
| Plasma | Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit. |
| Urine & Cerebrospinal Fluid | Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid. |
| Cell culture supernatant | Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately. |
| Cell lysates | Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Tissue homogenates | The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C. |
| Tissue lysates | Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C. |
| Breast Milk | Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles. |
