null

Human CRP ELISA Kit

SKU:
HUFI00088
Product Type:
ELISA Kit
Size:
96 Assays
Uniprot:
P02741
Sensitivity:
18.75pg/ml
Range:
31.25-2000pg/ml
ELISA Type:
Sandwich
Synonyms:
CRP, C-Reactive Protein, PTX1, Pentraxin 1
Reactivity:
Human
Research Area:
Immunology
€599
Frequently bought together:

Description

Kit Name

C-reactive protein, or CRP, is a protein that is produced in the liver and plays a key role in the inflammatory response. It functions in an immune response by binding to bacterial cells and other antigens, triggering a cascade of chemical reactions that lead to inflammation. Elevated CRP levels are associated with cardiovascular disease, cancer, chronic kidney disease, auto immune disorders and other inflammatory conditions. The Assay Genie Human CRP ELISA kit is a highly sensitive assay for the quantitative measurement of CRP in serum, blood, plasma, cell culture supernatant, and tissue samples.

system_update_alt Datasheet system_update_alt MSDS

Key Features

Save Time Pre-coated 96 well plate
Quick Start Kit includes all necessary reagents
Publication Ready Reproducible and reliable results

Overview

Product Name:

Human CRP ELISA Kit

Product Code:

HUFI00088

Size:

96 Assays

Alias:

CRP, C-Reactive Protein, PTX1, Pentraxin 1

Detection Method:

Sandwich ELISA, Double Antibody

Application:

This immunoassay kit allows for the in vitro quantitative determination of Human CRP concentrations in serum plasma and other biological fluids.

Sensitivity:

18.75pg/ml

Range:

31.25-2000pg/ml

Storage:

4°C for 6 months

Note:

For Research Use Only

Additional Information

Recovery:

Matrices listed below were spiked with certain level of Human CRP and the recovery rates were calculated by comparing the measured value to the expected amount of Human CRP in samples.

Matrix

Recovery Range (%)

Average (%)

serum (n=5)

87-102

96

EDTA plasma (n=5)

87-105

95

UFH plasma (n=5)

87-101

93

Linearity:

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Human CRP and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample

1:2

1:4

1:8

Serum (n=5)

89-102%

87-104%

87-98%

EDTA plasma (n=5)

85-101%

83-100%

82-99%

UFH Plasma (n=5)

86-100%

89-94%

82-94%

CV(%):

Intra-Assay: CV<8%
Inter-Assay: CV<10%

Kit Components

Component Quantity Storage

ELISA Microplate (Dismountable)

8x12 strips

4°C for 6 months

Lyophilized Standard

2

4°C/ -20°C

Sample/Standard Dlution Buffer

20ml

4°C

Biotin-labeled Antibody (Concentrated)

120ul

4°C (Protection from light)

Antibody Dilution Buffer

10ml

4°C

HRP-Streptavidin Conjugate (SABC)

120ul

4°C (Protect from light)

SABC Dilution Buffer

10ml

4°C

TMB Substrate

10ml

4°C (Protection from light)

Stop Solution

10ml

4°C

Wash Buffer (25X)

30ml

4°C

Plate Sealer

5

-

Other materials required:

  • Microplate reader with 450 nm wavelength filter
  • Multichannel Pipette, Pipette, microcentrifuge tubes and disposable pipette tips
  • Incubator
  • Deionized or distilled water
  • Absorbent paper
  • Buffer resevoir

Protein Information

Uniprot:

UniProt Protein Function:

Function: Displays several functions associated with host defense: it promotes agglutination, bacterial capsular swelling, phagocytosis and complement fixation through its calcium-dependent binding to phosphorylcholine. Can interact with DNA and histones and may scavenge nuclear material released from damaged circulating cells.

UniProt Code:

NCBI GenInfo Identifier:

NCBI Gene ID:

NCBI Accession:

UniProt Related Accession:

Molecular Weight:

25,039 Da

Protocol

*Note: Protocols are specific to each batch/lot. For the exact instructions please follow the protocol included in your kit.

Before adding to wells, equilibrate the SABC working solution and TMB substrate for at least 30 min at 37°C. When diluting samples and reagents, they must be mixed completely and evenly. It is recommended to plot a standard curve for each test.

Step Procedure

1.

Set standard, test sample and control (zero) wells on the pre-coated plate respectively, and then, record their positions. It is recommended to measure each standard and sample in duplicate. Wash plate 2 times before adding standard, sample and control (zero) wells!

2.

Aliquot 0.1ml standard solutions into the standard wells.

3.

Add 0.1 ml of Sample / Standard dilution buffer into the control (zero) well.

4.

Add 0.1 ml of properly diluted sample ( Human serum, plasma, tissue homogenates and other biological fluids.) into test sample wells.

5.

Seal the plate with a cover and incubate at 37 °C for 90 min.

6.

Remove the cover and discard the plate content, clap the plate on the absorbent filter papers or other absorbent material. Do NOT let the wells completely dry at any time. Wash plate X2.

7.

Add 0.1 ml of Biotin- detection antibody working solution into the above wells (standard, test sample & zero wells). Add the solution at the bottom of each well without touching the side wall.

8.

Seal the plate with a cover and incubate at 37°C for 60 min.

9.

Remove the cover, and wash plate 3 times with Wash buffer. Let wash buffer rest in wells for 1 min between each wash.

10.

Add 0.1 ml of SABC working solution into each well, cover the plate and incubate at 37°C for 30 min.

11.

Remove the cover and wash plate 5 times with Wash buffer, and each time let the wash buffer stay in the wells for 1-2 min.

12.

Add 90 µl of TMB substrate into each well, cover the plate and incubate at 37°C in dark within 10-20 min. (Note: This incubation time is for reference use only, the optimal time should be determined by end user.) And the shades of blue can be seen in the first 3-4 wells (with most concentrated standard solutions), the other wells show no obvious color.

13.

Add 50 µl of Stop solution into each well and mix thoroughly. The color changes into yellow immediately.

14.

Read the O.D. absorbance at 450 nm in a microplate reader immediately after adding the stop solution.

Sample Type

When carrying out an ELISA assay it is important to prepare your samples in order to achieve the best possible results. Below we have a list of procedures for the preparation of samples for different sample types.

Sample Type Protocol

Serum

If using serum separator tubes, allow samples to clot for 30 minutes at room temperature. Centrifuge for 10 minutes at 1,000x g. Collect the serum fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

If serum separator tubes are not being used, allow samples to clot overnight at 2-8°C. Centrifuge for 10 minutes at 1,000x g. Remove serum and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles.

Plasma

Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples at 4°C for 15 mins at 1000 × g within 30 mins of collection. Collect the plasma fraction and assay promptly or aliquot and store the samples at -80°C. Avoid multiple freeze-thaw cycles. Note: Over haemolysed samples are not suitable for use with this kit.

Urine & Cerebrospinal Fluid

Collect the urine (mid-stream) in a sterile container, centrifuge for 20 mins at 2000-3000 rpm. Remove supernatant and assay immediately. If any precipitation is detected, repeat the centrifugation step. A similar protocol can be used for cerebrospinal fluid.

Cell culture supernatant

Collect the cell culture media by pipette, followed by centrifugation at 4°C for 20 mins at 1500 rpm. Collect the clear supernatant and assay immediately.

Cell lysates

Solubilize cells in lysis buffer and allow to sit on ice for 30 minutes. Centrifuge tubes at 14,000 x g for 5 minutes to remove insoluble material. Aliquot the supernatant into a new tube and discard the remaining whole cell extract. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C.

Tissue homogenates

The preparation of tissue homogenates will vary depending upon tissue type. Rinse tissue with 1X PBS to remove excess blood & homogenize in 20ml of 1X PBS (including protease inhibitors) and store overnight at ≤ -20°C. Two freeze-thaw cycles are required to break the cell membranes. To further disrupt the cell membranes you can sonicate the samples. Centrifuge homogenates for 5 mins at 5000xg. Remove the supernatant and assay immediately or aliquot and store at -20°C or -80°C.

Tissue lysates

Rinse tissue with PBS, cut into 1-2 mm pieces, and homogenize with a tissue homogenizer in PBS. Add an equal volume of RIPA buffer containing protease inhibitors and lyse tissues at room temperature for 30 minutes with gentle agitation. Centrifuge to remove debris. Quantify total protein concentration using a total protein assay. Assay immediately or aliquot and store at ≤ -20 °C

Breast Milk

Collect milk samples and centrifuge at 10,000 x g for 60 min at 4°C. Aliquot the supernatant and assay. For long term use, store samples at -80°C. Minimize freeze/thaw cycles.

CRP Background

C-reactive protein (CRP) is a type of protein produced by the liver in response to inflammation in the body. It is classified as an acute-phase reactant, meaning its levels increase rapidly in the blood in response to inflammation or tissue injury. CRP is part of the body's innate immune response and plays a significant role in the body's defense against infections and tissue damage.

Function of CRP

CRP serves as a vital mediator of the innate immune response. Its primary function lies in recognizing and binding to specific molecular patterns present on the surface of pathogens, damaged cells, and apoptotic cells. By interacting with these targets, CRP triggers the activation of the complement system, a cascade of proteins that enhance the body's ability to eliminate foreign invaders. The activation of the complement system results in the opsonization of pathogens, leading to improved phagocytosis and destruction of these harmful agents. Additionally, CRP plays an anti-inflammatory role by modulating cytokine production and leukocyte migration, thus regulating the overall inflammatory response.

CRP and Cardiovascular Diseases

Elevated levels of CRP have been associated with an increased risk of cardiovascular diseases. Research indicates that CRP may play a role in the development and progression of atherosclerosis, a condition characterized by the buildup of plaque in arterial walls.

CRP FAQs

What is the CRP ELISA Kit?

The CRP ELISA Kit is an advanced assay designed to accurately quantify Human C-reactive protein levels in biological samples.

What are the advantages of using the CRP ELISA Kit?

The CRP ELISA Kit offers high sensitivity, specificity for Human CRP, an easy-to-use protocol, quantitative results, compatibility with various samples, and time-efficiency for research screening.

Where can I find more information about the CRP ELISA Kit?

For more detailed information about the CRP ELISA Kit, including technical specifications, performance characteristics, and ordering details, please refer to the product brochure or contact our customer support team. We are here to assist you with any inquiries you may have.

Citations

Gwinnutt et al.Do people with rheumatoid arthritis maintain their physical activity level at treatment onset over the first year of methotrexate therapy?Rheumatology (Oxford). (2021)PubMed: 33605404