SARS-CoV-2 Inhibitor Screening Kit (RBD)

(No reviews yet) Write a Review
SKU:
CBK4149
€599

Description

Description

The kit is a competitive inhibition enzyme immunoassay technique for the in vitro quantitative measurement of RBD Neutralizing Antibody in serum, plasma.

Product Overview

The ELISA (Enzyme-Linked Immunosorbent Assay) kit is an in vitro enzyme-linked immunosorbent assay for the quantitative measurement of samples in serum, plasma (EDTA, citrate, heparin).

Intended Use

This SARS-CoV-2 Inhibitor Screening Kit(RBD) ELISA kit is intended for laboratory research use only and not for use in diagnostic or therapeutic procedures. The stop solution changes color from blue to yellow and the intensity of the color is measured at 450 nm using a spectrophotometer. In order to measure the concentration of SARS-CoV-2 Inhibitor Screening Kit(RBD) in the sample, this SARS-CoV-2 Inhibitor Screening Kit(RBD) ELISA Kit includes a set of calibration standards. The calibration standards are assayed at the same time as the samples and allow the operator to produce a standard curve of optical density versus SARS-CoV-2 Inhibitor Screening Kit(RBD) concentration. The concentration of the samples is then determined by comparing the O.D. of the samples to the standard curve.

Key Information Description

Product Name:

SARS-CoV-2 Inhibitor Screening Kit (RBD)

SKU:

CBK4149

Size:

97T

Sample:

100 ul

Instrument:

Microplate Reader

Detection:

Colorimetric

Assay Time:

2.5 hours

Conjugate:

Biotin

Precautions:

competitive inhibition ELISA

Componnets:

Microwell Plate coated with RBD pretein
Biotin-Conjugate ACE-2 protein
Streptavidin-HRP
RBD Neutralizing Antibody
Antibody/Sample Diluent
Biotin-Conjugate ACE-2 protein Diluent
Streptavidin-HRP Diluent
Wash Buffer Concentrate 20x
Substrate Solution (tetramethyl-benzidine)
Stop Solution
Plate Sealers
Specification

Sample type:

serum, plasma and other biological fluids

Cross reaction with:

Human

Storage Instructions:

Store at 2-8℃ for 1 week

Sensitivity:

0.112 ug/mL

Standard curve range:

0.312-20ug/ml

USAGE

Research Use Only

Safety Notes:

1. This kit contains materials with small quantities of sodium azide. Sodium azide reacts with lead and copper plumbing to form explosive metal azides. Upon disposal, flush drains with a large volume of water to prevent azide accumulation. Avoid ingestion and contact with eyes, skin or mucous membranes. In the case of contact, rinse the affected area with plenty of water. Observe all federal, state and local regulations for disposal.
2. All blood components and biological materials should be handled as potentially hazardous. Follow universal precautions as established by the Centers for Disease Control and Prevention and by the Occupational Safety and Health Administration when handling and disposing of infectious agents.

View AllClose